11/30232437 DC : 0
Current
The latest, up-to-date edition.
BS EN 1870-6:2002+A1:2009/FPRA2 - SAFETY OF WOODWORKING MACHINES - CIRCULAR SAWING MACHINES - PART 6: CIRCULAR SAWING MACHINES FOR FIREWOOD AND DUAL PURPOSE CIRCULAR SAWING MACHINES FOR FIREWOOD/CIRCULAR SAW BENCHES, WITH MANUAL LOADING AND/OR UNLOADING
Hardcopy , PDF
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Modifications throughout the whole document
2 Modifications to the Foreword
3 Modifications to Clause 1, Scope
4 Modifications to Clause 2, Normative references
5 Modification to 3.2, Definitions
6 Modifications to Clause 4, List of significant hazards
7 Modifications to Clause 5, Safety requirements and/or
measures
8 Modifications to 5.1.1, Safety and reliability of control
systems
9 Addition of a new Subclause 5.2.1.2, Use of protective
devices
10 Modification to 5.1.3, Starting
11 Modifications to 5.1.4, Normal stopping
12 Modifications to 5.1.5, Emergency stop
13 Modifications to 5.2.2, Risk of break-up during
operation
14 Modifications to 5.2.4.1, General
15 Modification to 5.2.4.2, Conditions for all tests
16 Modification to 5.2.4.3, Tests
17 Modification to 5.2.5, Devices to minimise the
possibility or the effect of ejection
18 Modification to 5.2.7.1, Guarding of the saw blade on
circular sawing machines for firewood
with pivoting log carriage
19 Modification to 5.2.7.2, Guarding of the saw
blade on circular sawing machines for
firewood with sliding table
20 Modifications to 5.2.7.3.3, Guarding of the saw
blade below the table during use in the
saw bench mode
21 Modification to 5.2.7.4, Guarding of drives
22 Modification to 5.3.1, Fire
23 Modification to 5.3.2.2, Noise emission measurement
24 Modification to 5.3.2.3, Declaration
25 Modifications to 5.3.3, Emission of chips, dust
and gases
26 Modifications to 5.3.4, Electricity
27 Modification to 5.3.9, Heat
28 Modification to 5.3.11, Vibration
29 Modification to 5.3.12, Isolation
30 Modification to 5.3.13, Laser
31 Modification to 5.3.14, Static electricity
32 Modification to 5.3.17, Maintenance
33 Modification to Clause 6, Information for use
34 Modification to 6.1, Warning devices
35 Modification to 6.2.1, Marking of machine
36 Modifications to 6.3, Instruction handbook
37 Modification to Annex F, Saw bench table minimum
dimensions on dual-purpose circular sawing
machines for firewood/circular saw benches
38 Addition of a new Annex H, Brake tests
39 Addition of a new Annex I, Impact test method
for guards
40 Modification to Annex ZA, Relationship between this
European Standard and the Essential
Requirements of EU Directive 98/37/EC
41 Modification to Annex ZB, Relationship between
this European Standard and the Essential
Requirements of EU Directive 2006/42/EC
42 Modifications to the Bibliography
BS EN 1870-6:2002+A1:2009/FPRA2
| Committee |
MTE/23
|
| DocumentType |
Draft
|
| Pages |
25
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| ISO 11202:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| EN 60745-1:2009/A11:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
| EN 60745-2-5:2010 | HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 2-5: PARTICULAR REQUIREMENTS FOR CIRCULAR SAWS |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| EN 61800-5-2:2017 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| IEC 60947-4-1:2009+AMD1:2012 CSV | Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters |
| EN 1093-9:1998+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 9: Pollutant concentration parameter, room method |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| EN ISO 3746:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746:2010) |
| EN 60947-4-1 : 2010 AMD 1 2012 | LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 4-1: CONTACTORS AND MOTOR-STARTERS - ELECTROMECHANICAL CONTACTORS AND MOTOR-STARTERS (IEC 60947-4-1:2009/A1:2012) |
| IEC 60745-2-5:2010 | Hand-held motor-operated electric tools - Safety - Part 2-5: Particular requirements for circular saws |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| IEC 60745-1:2006 | Hand-held motor-operated electric tools - Safety - Part 1: General requirements |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| EN ISO 3743-1:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields - Part 1: Comparison method for a hard-walled test room (ISO 3743-1:2010) |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| EN ISO 11202:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010) |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| EN 1093-11:2001+A1:2008 | Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 11: Decontamination index |
| IEC 61800-5-2:2016 | Adjustable speed electrical power drive systems - Part 5-2: Safety requirements - Functional |
| ISO 3743-1:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.