09/30203808 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
Hardcopy , PDF
09-30-2011
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
201.1 Scope, object and related standards
201.1.1 Scope
201.1.2 Object
201.1.3 Collateral standards
201.1.4 Particular standards
201.2 Normative references
201.3 Terms and definitions
201.4 General requirements
201.4.3 Essential performance
201.4.6 ME equipment or ME system parts that contact
the patient
201.4.101 Additional requirements for essential
performance
201.5 General requirements for testing of ME equipment
201.5.101 Additional requirements for general
requirements for testing of ME equipment
201.6 Classification of ME equipment and ME systems
201.7 ME equipment identification, marking and documents
201.8 Protection against electrical hazards from ME equipment
201.9 Protection against mechanical hazards of ME equipment
and ME systems
201.9.101 Additional requirements for suction
procedures
201.10 Protection against unwanted and excessive radiation
hazards
201.11 Protection against excessive temperatures and other
hazards
201.12 Accuracy of controls and instruments and protection
against hazardous outputs
201.12.1 Accuracy of controls and instruments
201.12.4 Protection against hazardous output
201.12.101 Protection against accidental adjustments
201.13 Hazardous situations and fault conditions
201.13.101 Delivered Oxygen concentration
201.13.102 Failure of one gas supply to a ventilator
201.13.103 Independence of ventilation control function
and related risk control measures
201.14 Programmable electrical medical systems (PEMS)
201.14.101 Software life cycle
201.15 Construction of ME equipment
201.15.101 Mode of operation
201.16 ME systems
201.17 Electromagnetic compatibility of ME equipment
and ME systems
201.17.101 Additional requirements for electromagnetic
compatibility of ME equipment ME systems
201.101 Gas connections
201.101.1 Reverse gas flow
201.101.2 High-pressure input ports
201.101.3 Connection to the medical gas pipeline system
201.101.4 VBS connectors
201.102 Requirements for the VBS and accessories
201.102.1 General
201.102.2 Labelling
201.102.3 Breathing tubes
201.102.4 Water management
201.102.5 Gas mixers
201.102.6 Breathing system filters
201.102.7 Ventilator breathing systems
201.103 Spontaneous breathing during loss of power
supply
201.104 Training
201.105 Indication of duration of operation
201.106 Signal input/output part
201.106.1 General
201.106.2 Connection to electronic health record
201.106.3 Connection to a distributed alarm system
201.106.4 Connection for remote control
201.107 Display loops
201.107.1 Pressure-volume loops
201.107.2 Flow-volume loops
201.108 Timed ventilatory pause
202 Medical electrical equipment - Part 1-2: General
requirements for basic safety and essential performance -
Collateral standard: Electromagnetic compatibility -
Requirements and tests
202.6.2.1.10 Compliance criteria
206 Medical electrical equipment - Part 1-8: General
requirements for basic safety and essential performance -
Collateral Standard: Usability
208 Medical electrical equipment - Part 1-8: General
requirements for basic safety and essential performance -
Collateral Standard: General requirements, tests and
guidance for alarm systems in medical electrical
equipment and medical electrical systems
Annex C (informative) - Guide to marking and labelling
requirements for ME equipment and ME systems
Annex D (informative) - Symbols on marking
Annex AA (informative) - Particular guidance and rationale
Annex BB (informative) - Reference to the Essential Principles
Bibliography
Alphabetized index of defined terms used in this particular
standard
Annex ZA (informative) - Relationship between this Document
and the Essential Requirements of EU Directive
93/42/EEC
BS EN ISO 80601-2-12
| Committee |
CH/121/5
|
| DocumentType |
Draft
|
| Pages |
96
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| ISO 7010:2011 | Graphical symbols Safety colours and safety signs Registered safety signs |
| ISO 4871:1996 | Acoustics — Declaration and verification of noise emission values of machinery and equipment |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO 80601-2-13:2011 | Medical electrical equipment Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| IEC 60601-1-6:2010+AMD1:2013 CSV | Medical electrical equipment - Part 1-6: General requirements for basic safety and essential performance - Collateral standard: Usability |
| IEC 60721-3-7:1995+AMD1:1996 CSV | Classification of environmental conditions - Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| ISO 10651-4:2002 | Lung ventilators — Part 4: Particular requirements for operator-powered resuscitators |
| IEC 60601-1-10:2007+AMD1:2013 CSV | Medical electrical equipment - Part 1-10: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for the development of physiologic closed-loopcontrollers |
| ISO 14937:2009 | Sterilization of health care products General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices |
| IEC 60601-1-8:2006+AMD1:2012 CSV | Medical electrical equipment - Part 1-8: General requirements forbasic safety and essential performance - Collateral Standard: General requirements, tests and guidance for alarm systems inmedical electrical equipment and medical electrical systems |
| IEC 60068-2-64:2008 | Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance |
| ISO 5356-2:2012 | Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors |
| IEC 62366:2007+AMD1:2014 CSV | Medical devices - Application of usability engineering to medical devices |
| ASTM D 5466 : 2015 : REDLINE | Standard Test Method for Determination of Volatile Organic Compounds in Atmospheres (Canister Sampling Methodology) |
| ISO 32:1977 | Gas cylinders for medical use — Marking for identification of content |
| ISO 5367:2014 | Anaesthetic and respiratory equipment — Breathing sets and connectors |
| IEC 60601-1-2:2014 | Medical electrical equipment - Part 1-2: General requirements for basic safety and essential performance - Collateral Standard: Electromagnetic disturbances - Requirements and tests |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| ISO 8185:2007 | Respiratory tract humidifiers for medical use Particular requirements for respiratory humidification systems |
| IEC 62304:2006+AMD1:2015 CSV | Medical device software - Software life cycle processes |
| ISO 14159:2002 | Safety of machinery — Hygiene requirements for the design of machinery |
| ISO 23328-2:2002 | Breathing system filters for anaesthetic and respiratory use — Part 2: Non-filtration aspects |
| IEC TR 60878:2015 | Graphical symbols for electrical equipment in medical practice |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| ASTM F 2761 : 2009 : R2013 | Medical Devices and Medical Systems - Essential safety requirements for equipment comprising the patient-centric integrated clinical environment (ICE) - Part 1: General requirements and conceptual model |
| CFR 29(PT1910.1000 TO END) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| ISO 80601-2-55:2011 | Medical electrical equipment Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors |
| ISO 23328-1:2003 | Breathing system filters for anaesthetic and respiratory use — Part 1: Salt test method to assess filtration performance |
| ISO 9360-1:2000 | Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| IEC 60068-2-29:1987 | Environmental testing. Part 2: Tests. Test Eb and guidance: Bump |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| ISO 14971:2007 | Medical devices Application of risk management to medical devices |
| ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
| ISO 4135:2001 | Anaesthetic and respiratory equipment Vocabulary |
| ISO 9360-2:2001 | Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of 250 ml |
| ISO 10524-1:2006 | Pressure regulators for use with medical gases Part 1: Pressure regulators and pressure regulators with flow-metering devices |
| IEC 60601-2-12:2001 | Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators - Critical care ventilators |
| ISO 594-2:1998 | Conical fittings with 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 2: Lock fittings |
| ISO 15223-1:2016 | Medical devices Symbols to be used with medical device labels, labelling and information to be supplied Part 1: General requirements |
| ISO 11195:1995 | Gas mixers for medical use Stand-alone gas mixers |
| IEC 60601-1-9:2007+AMD1:2013 CSV | Medical electrical equipment - Part 1-9: General requirements forbasic safety and essential performance - Collateral Standard: Requirements for environmentally conscious design |
| ISO 594-1:1986 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements |
| ISO 17664:2017 | Processing of health care products Information to be provided by the medical device manufacturer for the processing of medical devices |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.