09/30200834 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 1559-1 - FOUNDING - TECHNICAL CONDITIONS OF DELIVERY - PART 1: GENERAL
Hardcopy , PDF
04-30-2011
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser
4.1 Mandatory information
4.2 Optional information
4.3 Drawings, patterns and tools
4.4 Information on the mass
4.5 Preliminary sample
4.6 Initial sample
5 Designations
6 Manufacture
6.1 Manufacturing process
6.2 Welding operations
7 Requirements
7.1 General
7.2 Material
7.3 Casting
8 Inspection
8.1 General
8.2 Type of inspection documents and type of
inspection
8.3 Test unit
8.4 Samples
8.5 Test procedures
8.6 Invalidation of test results
8.7 Retests
8.8 Sorting and reprocessing
9 Marking
10 Packaging and surface protection
11 Complaints
Annex A (normative) - Mandatory and/or optional
information checklist
Annex B (informative) - Significant technical changes
that have been made to this standard
Bibliography
BS EN 1559-1
| Committee |
ISE/NFE/9
|
| DocumentType |
Draft
|
| Pages |
25
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 1559-1 : DRAFT 2009 | Identical |
| EN 1780-1:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 1: Numerical designation system |
| EN 10002-1 : 2001 | METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
| EN ISO 8062-1:2007 | Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007) |
| EN ISO 8062-3 : 2007 COR 2009 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL AND GEOMETRICAL TOLERANCES FOR MOULDED PARTS - PART 3: GENERAL DIMENSIONAL AND GEOMETRICAL TOLERANCES AND MACHINING ALLOWANCES FOR CASTINGS |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| EN ISO 6506-1:2014 | Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
| ISO 6506-1:2014 | Metallic materials Brinell hardness test Part 1: Test method |
| EN 12680-2:2003 | Founding - Ultrasonic examination - Part 2: Steel castings for highly stressed components |
| EN 10027-2:2015 | Designation systems for steels - Part 2: Numerical system |
| EN 1559-3:2011 | Founding - Technical conditions of delivery - Part 3: Additional requirements for iron castings |
| EN 12680-1:2003 | Founding - Ultrasonic examination - Part 1: Steel castings for general purposes |
| EN 1780-2:2002 | Aluminium and aluminium alloys - Designation of alloyed aluminium ingots for remelting, master alloys and castings - Part 2: Chemical symbol based designation system |
| EN 1560:2011 | Founding - Designation system for cast iron - Material symbols and material numbers |
| EN 12890:2000 | Founding - Patterns, pattern equipment and coreboxes for the production of sand moulds and sand cores |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| EN 1559-5:2017 | Founding - Technical conditions of delivery - Part 5: Additional requirements for magnesium alloy castings |
| EN 1754:2015 | Magnesium and magnesium alloys - Designation system for anodes, ingots and castings - Material symbols and material numbers |
| EN 10045-1 : 1990 | METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
| ISO 10135:2007 | Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD) |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| EN 1559-6:1998 | Founding - Technical conditions of delivery - Part 6: Additional requirements for zinc alloy castings |
| EN 1370:2011 | Founding - Examination of surface condition |
| ISO 8062-1:2007 | Geometrical product specifications (GPS) Dimensional and geometrical tolerances for moulded parts Part 1: Vocabulary |
| EN ISO 9001:2015 | Quality management systems - Requirements (ISO 9001:2015) |
| EN 10021:2006 | General technical delivery conditions for steel products |
| EN 1559-2:2014 | Founding - Technical conditions of delivery - Part 2: Additional requirements for steel castings |
| EN 1371-1:2011 | Founding - Liquid penetrant testing- Part 1: Sand, gravity die and low pressure die castings |
| EN 1371-2:2015 | Founding - Liquid penetrant testing - Part 2: Investment castings |
| EN 10204:2004 | Metallic products - Types of inspection documents |
| EN 12680-3:2011 | Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
| ISO 9001:2015 | Quality management systems — Requirements |
| EN 1369:2012 | Founding - Magnetic particle testing |
| EN 12892:2000 | Founding - Equipment for the production of lost patterns for the lost foam casting process |
| EN 10027-1:2016 | Designation systems for steels - Part 1: Steel names |
| EN 12681:2003 | Founding - Radiographic examination |
| EN 12844:1998 | Zinc and zinc alloys - Castings - Specifications |
| EN 1559-4:2015 | Founding - Technical conditions of delivery - Part 4: Additional requirements for aluminium alloy castings |
| EN 12883:2000 | Founding - Equipment for the production of lost patterns for the lost wax casting process |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.