09/30182215 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 12001:2003/A1 - CONVEYING, SPRAYING AND PLACING MACHINES FOR CONCRETE AND MORTAR - SAFETY REQUIREMENTS
Hardcopy , PDF
01-31-2010
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Modification to the Introduction
2 Modification to the Scope
3 Modification to Clause 2, Normative references
4 Modification to Clause 3, Terms and definitions
5 Modification to Clause 4, List of significant hazards
6 Modification to Clause 5, Safety requirements and/or
protective measures
7 Modification to 5.1, Requirements common to all machines
8 Modification to 5.2, Specific requirements for single machines
9 Modification to 5.3, Machinery groups
10 Modification to 5.4, Control requirements (electrical and
hydraulic)
11 Modification to 5.4.1, Hopper cover
12 Modification to 5.4.3, Stabilisers
13 Modification to 5.4.4, Emergency-stop devices
14 Modification to 5.4.5, Concrete-placing boom including slewing
mechanism
15 Modification to 5.5.1, Verification of stability of placing
booms on vehicles
16 Modification to 5.5.1.1, Verification of stability by
calculation
17 Modification to 6.2, Individual verification of each unit
18 Modification to 6.3, Final inspection
19 Modification to 7.1, Accompanying documents (in particular:
instruction handbook)
20 Modification to 7.9.1
21 Modification to 7.9.2
22 Modification to 7.9.5
23 Modification to 7.9.6
24 Modification to 7.9.7
25 Modification to Annex B
26 Addition of a new Annex C
27 Modification to Annex ZA
28 Addition of a new Annex ZB
29 Modification to the Bibliography
BS EN 12001:2003/A1
| Committee |
B/513/-/8
|
| DocumentType |
Draft
|
| Pages |
20
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| EN ISO 11204:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010) |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| ISO/TR 11688-1:1995 | Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| DIN 24117:2007-02 | CONSTRUCTION EQUIPMENT AND BUILDING MATERIAL MACHINERY - DISTRIBUTING MAST FOR CONCRETE PUMPS - PRINCIPLES OF CALCULATION AND STABILITY |
| DIN 24118:2007-03 | CONSTRUCTION EQUIPMENT AND BUILDING MATERIAL MACHINERY - CONCRETE DELIVERY PIPELINES - DIMENSIONS AND CALCULATIONS |
| IEC 60204-1:2016 | Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| EN ISO 11201:2010 | Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
| EN 12151:2007 | Machinery and plants for the preparation of concrete and mortar - Safety requirements |
| EN ISO 3744:2010 | Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane (ISO 3744:2010) |
| ISO 12100-2:2003 | Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| EN ISO 11688-1:2009 | Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| ISO 11201:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
| ISO 11204:2010 | Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.