09/30178949 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS ISO 4802-2 - GLASSWARE - HYDROLYTIC RESISTANCE OF THE INTERIOR SURFACES OF GLASS CONTAINERS - PART 2: DETERMINATION BY FLAME SPECTROMETRY AND CLASSIFICATION
Hardcopy , PDF
06-30-2010
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Principle
5 Reagents
6 Apparatus
7 Sample preparation
7.1 Sample size
7.2 Determination of the filling volume
7.2.1 Flat-bottomed containers up to 20
mm bore diameter (except ampoules,
syringes and cartridges)
7.2.2 Flat-bottomed containers greater
than 20 mm bore diameter
7.2.3 Round-bottomed containers
7.2.4 Lipped containers
7.2.5 Ampoules
7.2.6 Syringes and cartridges
8 Procedure
8.1 Cleaning of samples
8.2 Filling and heating
8.3 Analysis of the extraction solutions
8.3.1 Containers of hydrolytic resistance
container classes HC[F] 1, HC[F] 2
and HC[F] B or those known to be made
from borosilicate glass
8.3.2 Containers of hydrolytic resistance
container classes HC[F] 3 and HC[F] D,
or those known to be made from
soda-lime-silica glass
8.4 Testing to determine whether the containers
have been surface-treated
9 Expression of results
9.1 Calculation
9.2 Classification
9.3 Distinction between containers of hydrolytic
resistance container class HC[F] 1 and
hydrolytic resistance container class HC[F] 2
9.4 Designation
10 Test report
11 Reproducibility
Bibliography
| Committee |
CH/212
|
| DocumentType |
Draft
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| ISO 11040-4:2015 | Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling |
| ISO 13926-1:2004 | Pen systems Part 1: Glass cylinders for pen-injectors for medical use |
| ISO 385:2005 | Laboratory glassware — Burettes |
| ISO 720:1985 | Glass Hydrolytic resistance of glass grains at 121 degrees C Method of test and classification |
| ISO 3585:1998 | Borosilicate glass 3.3 — Properties |
| ISO 1042:1998 | Laboratory glassware — One-mark volumetric flasks |
| ISO 3819:2015 | Laboratory glassware — Beakers |
| ISO 8362-4:2011 | Injection containers and accessories Part 4: Injection vials made of moulded glass |
| ISO 8362-1:2009 | Injection containers and accessories Part 1: Injection vials made of glass tubing |
| ISO 3696:1987 | Water for analytical laboratory use — Specification and test methods |
| ISO 11418-1:2016 | Containers and accessories for pharmaceutical preparations — Part 1: Drop-dispensing glass bottles |
| ISO 11418-4:2005 | Containers and accessories for pharmaceutical preparations — Part 4: Tablet glass bottles |
| ISO 11040-1:2015 | Prefilled syringes Part 1: Glass cylinders for dental local anaesthetic cartridges |
| ISO 719:1985 | Glass Hydrolytic resistance of glass grains at 98 degrees C Method of test and classification |
| ISO 9187-1:2010 | Injection equipment for medical use Part 1: Ampoules for injectables |
| ISO 11418-7:2016 | Containers and accessories for pharmaceutical preparations Part 7: Screw-neck vials made of glass tubing for liquid dosage forms |
| ISO 8536-1:2011 | Infusion equipment for medical use Part 1: Infusion glass bottles |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.