08/30194094 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 13245-3 - PLASTICS - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U) PROFILES FOR BUILDING APPLICATIONS - PART 3: DESIGNATION OF PVC-UE PROFILES
Hardcopy , PDF
09-30-2010
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Designation of PVC-UE profiles
5 Codification system for Data block 3 to Data block 5
5.1 Modulus of elasticity in flexure (Data block 3)
5.2 Nominal linear mass (Data block 4)
5.3 Heat reversion at 75 degree C (Data block 4)
5.4 Impact resistance (Data block 4)
5.5 Durability (Data block 5)
5.5.1 General
5.5.2 Test methods for ageing
5.5.3 Methods for assessing of ageing
5.5.4 Codification for properties after ageing
6 Required characteristics for Type 3 and Type 4 profiles
6.1 Resistance to cross cut (only for Type 4 profiles)
6.2 Thermal resistance (only for Type 3 and Type 4 profiles)
6.3 Water vapour resistance (only for Type 3 and Type 4
profiles, intended to be used for inside building
applications)
6.4 Peel strength (only for Type 3 profiles)
7 Optional characteristics
7.1 Resistance to staining
7.2 Appearance and finishing of the coating (for Type 3 and
4 only)
7.2.1 General
7.2.2 Single colour profiles
7.2.3 Non-uniform colour and texture profiles
7.2.4 Gloss
8 Example of the designation of a PVC-UE profile
9 Use of reprocessable and recyclable material
Annex A (normative) - Determination of the linear mass
A.1 Apparatus
A.2 Test specimens
A.3 Procedure
A.4 Calculation and expression of results
Annex B (normative) - Impact resistance of PVC-UE profiles
B.1 Principle
B.2 Apparatus
B.3 Test specimens
B.4 Conditioning
B.4.1 Impact resistance at 23 degree C
B.4.2 Impact resistance at low temperature
B.5 Procedure
B.6 Expression of results
Annex C (normative) - Determination of peel strength
C.1 Principle
C.2 Apparatus
C.3 Preparation of test pieces
C.4 Conditioning
C.5 Procedure
C.5.1 Constant-speed tensile test
C.5.2 Constant-load tensile test
C.6 Test report
Bibliography
BS EN 13245-3
| Committee |
PRI/82
|
| DocumentType |
Draft
|
| Pages |
28
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 13245-3 : DRAFT 2008 | Identical |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
| EN ISO 105-A01:2010 | Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| EN 12720:2009+A1:2013 | Furniture - Assessment of surface resistance to cold liquids |
| EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
| EN ISO 179-1:2010 | Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010) |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| ISO 4624:2016 | Paints and varnishes — Pull-off test for adhesion |
| ISO 472:2013 | Plastics — Vocabulary |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| EN ISO 4624:2016 | Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
| ISO 179-1:2010 | Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| EN 438-2:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 2: Determination of properties |
| ISO 105-A01:2010 | Textiles Tests for colour fastness Part A01: General principles of testing |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 178:2010 | Plastics Determination of flexural properties |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
| EN 513:1999 | Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
| EN ISO 472:2013 | Plastics - Vocabulary (ISO 472:2013) |
| ISO 2813:2014 | Paints and varnishes — Determination of gloss value at 20°, 60° and 85° |
| EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.