08/30187521 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 593 - INDUSTRIAL VALVES - METALLIC BUTTERFLY VALVES
Hardcopy , PDF
02-28-2010
English
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
4.1 Design
4.1.1 Construction
4.1.2 Materials
4.1.3 Pressure/temperature ratings
4.1.4 Dimensions and tolerances
4.1.5 Operation
4.1.6 Permanent joining
4.2 Functional characteristics
4.2.1 Application
4.2.2 Design strength
4.2.3 Flow characteristics
4.2.4 Leak tightness
5 Testing procedures
5.1 Pressure tests
5.2 Operability test
5.3 Other tests
6 Declaration of compliance
7 Designation
8 Marking and preparation for storage and transportation
8.1 Marking
8.2 Preparation for storage and transportation
Annex A (informative) - Information to be supplied by the
purchaser
Annex B (informative) - Trim material list
Annex C (informative) - Environmental corrosion protection
Annex ZA (informative) - Relationship between this European
Standard and the Essential
Requirements of EU Directive
97/23/EC (PED)
Bibliography
BS EN 593
| Committee |
PSE/7/3
|
| DocumentType |
Draft
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 593 : DRAFT 2016 | Identical |
| EN 12982:2009 | Industrial valves - End-to-end and centre-to-end dimensions for butt welding end valves |
| EN 10269:2013 | Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| EN 1349:2009 | Industrial process control valves |
| EN 1759-1:2004 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24 |
| EN 1759-4:2003 | Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges |
| EN 558:2017 | Industrial valves - Face-to-face and centre-to-face dimensions of metal valves for use in flanged pipe systems - PN and Class designated valves |
| EN 12266-2:2012 | Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements |
| EN 12516-1:2014 | Industrial valves - Shell design strength - Part 1: Tabulation method for steel valve shells |
| EN 12516-4:2014 | Industrial valves - Shell design strength - Part 4: Calculation method for valve shells manufactured in metallic materials other than steel |
| EN 736-2:2016 | Valves - Terminology - Part 2: Definition of components of valves |
| EN 12266-1:2012 | Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements |
| EN 1092-4:2002 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges |
| ISO 12944-2:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 2: Classification of environments |
| EN 12570:2000 | Industrial valves - Method for sizing the operating element |
| EN 60534-2-1:2011/AC:2015 | INDUSTRIAL-PROCESS CONTROL VALVES - PART 2-1: FLOW CAPACITY - SIZING EQUATIONS FOR FLUID FLOW UNDER INSTALLED CONDITIONS (IEC 60534-2-1:2011) |
| EN 60534-2-3:2016 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
| IEC 60534-2-3:2015 | Industrial-process control valves - Part 2-3: Flow capacity - Test procedures |
| EN 12516-2:2014 | Industrial valves - Shell design strength - Part 2: Calculation method for steel valve shells |
| ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials General rules |
| IEC 60534-2-1:2011 | Industrial-process control valves - Part 2-1: Flow capacity - Sizing equations for fluid flow under installed conditions |
| EN 1418:1997 | Welding personnel - Approval testing of welding operators for fusion welding and resistance weld setters for fully mechanized and automatic welding of metallic materials |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| EN 1092-2:1997 | Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges |
| EN ISO 5211:2017 | Industrial valves - Part-turn actuator attachments (ISO 5211:2017) |
| EN 19:2016 | Industrial valves - Marking of metallic valves |
| EN 1267:2012 | Industrial valves - Test of flow resistance using water as test fluid |
| ISO 1043-1:2011 | Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
| ISO 1629:2013 | Rubber and latices — Nomenclature |
| EN 736-3:2008 | Valves - Terminology - Part 3: Definition of terms |
| EN ISO 15607:2003 | Specification and qualification of welding procedures for metallic materials - General rules (ISO 15607:2003) |
| ISO 5211:2017 | Industrial valves — Part-turn actuator attachments |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| EN 287-1:2011 | Qualification test of welders - Fusion welding - Part 1: Steels |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.