05/30131954 DC : DRAFT APR 2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
BS 5628-3 - CODE OF PRACTICE FOR THE USE OF MASONRY - PART 3: MATERIALS AND COMPONENTS, DESIGN AND WORKMANSHIP
Superseded date
12-29-2005
Published date
11-23-2012
Publisher
Sorry this product is not available in your region.
Committee |
B/525/6
|
DocumentType |
Draft
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
BS EN 1015-11:1999 | Methods of test for mortar for masonry Determination of flexural and compressive strength of hardened mortar |
BS 476-23:1987 | Fire tests on building materials and structures Methods for determination of the contribution of components to the fire resistance of a structure |
BS 5493:1977 | Code of practice for protective coating of iron and steel structures against corrosion |
BS EN 771-5 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 5: MANUFACTURED STONE MASONRY UNITS |
BS 1289-1:1986 | Flue blocks and masonry terminals for gas appliances Specification for precast concrete flue blocks and terminals |
BS EN 10088-1:2014 | Stainless steels List of stainless steels |
BS EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime. Specifications and methods of test |
BS 8004:1986 | Code of practice for foundations |
BS EN 771-3 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 3: AGGREGATE CONCRETE MASONRY UNITS (DENSE AND LIGHTWEIGHT AGGREGATES) |
BS EN 1806:2006 | Chimneys Clay/ceramic flue blocks for single wall chimneys Requirements and test methods |
BS 3837-2:1990 | Expanded polystyrene boards Specification for extruded boards |
BS ISO 11600:2002 | Building construction. Jointing products. Classification and requirements for sealants |
BS EN 13139:2013 | Aggregates for mortar |
BS EN 12167:2011 | Copper and copper alloys. Profiles and bars for general purposes |
BS EN 13162 : 2012 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
BS 5390:1976 | Code of practice for stone masonry |
BS 3837-1:1986 | Expanded polystyrene boards Specification for boards manufactured from expandable beads |
BS EN 413-1:2011 | Masonry cement Composition, specifications and conformity criteria |
BS EN 10143:2006 | Continuously hot-dip coated steel sheet and strip. Tolerances on dimensions and shape |
BS EN 13055-1:2002 | Lightweight aggregates Lightweight aggregates for concrete, mortar and grout |
BS EN 845-2 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 2: LINTELS |
BS 6561:1985 | Specification for zinc alloy sheet and strip for building |
BS EN 771-4 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 4: AUTOCLAVED AERATED CONCRETE MASONRY UNITS |
BS EN 1008:2002 | Mixing water for concrete. Specification for sampling, testing and assessing the suitability of water, including water recovered from processes in the concrete industry, as mixing water for concrete |
BS 8221-1:2000 | Code of practice for cleaning and surface repair of buildings Cleaning of natural stones, brick, terracotta and concrete |
BS 8000-2.1:1990 | Workmanship on building sites. Code of practice for concrete work Mixing and transporting concrete |
BS EN 10111:2008 | Continuously hot rolled low carbon steel sheet and strip for cold forming. Technical delivery conditions |
BS 8000-2.2:1990 | Workmanship on building sites. Code of practice for concrete work Sitework with in situ and precast concrete |
BS 6399-3(1988) : 1988 | LOADING FOR BUILDINGS - PART 3: CODE OF PRACTICE FOR IMPOSED ROOF LOADS |
BS 5977-1:1981 | Lintels Method for assessment of load |
BS DD140-2(1987) : 1987 | WALL TIES - RECOMMENDATIONS FOR DESIGN OF WALL TIES |
BS EN 934-3 : 2009 | ADMIXTURES FOR CONCRETE, MORTAR AND GROUT - PART 3: ADMIXTURES FOR MASONRY MORTAR - DEFINITIONS, REQUIREMENTS, CONFORMITY AND MARKING AND LABELLING |
BS EN 845-3 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 3: BED JOINT REINFORCEMENT OF STEEL ESHWORK |
BS 8104:1992 | Code of practice for assessing exposure of walls to wind-driven rain |
BS EN 1052-1:1999 | Methods of test for masonry Determination of compressive strength |
BS 6515:1984 | Specification for polyethylene damp-proof courses for masonry |
BS EN 10025:1993 | Hot rolled products of non-alloy structural steels. Technical delivery conditions |
BS EN ISO 14713:1999 | Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines |
BS EN 12620:2013 | Aggregates for concrete |
BS EN 459-1:2015 | Building lime Definitions, specifications and conformity criteria |
BS 4721:1981 | Specification for ready-mixed building mortars |
BS EN ISO 196:1995 | Wrought copper and copper alloys. Detection of residual stress. Mercury(I) nitrate test |
BS 5642-1(1978) : 1978 | SILLS, COPINGS AND CAPPINGS - PART 1: SPECIFICATION FOR WINDOW SILLS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS EN 12588:2006 | Lead and lead alloys. Rolled lead sheet for building purposes |
BS EN 998-1:2016 | Specification for mortar for masonry Rendering and plastering mortar |
BS 6461-1:1984 | Installation of chimneys and flues for domestic appliances burning solid fuel (including wood and peat) Code of practice for masonry chimneys and flue pipes |
BS EN 771-2 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 2: CALCIUM SILICATE MASONRY UNITS |
BS EN 197-1:2011 | Cement Composition, specifications and conformity criteria for common cements |
BS 7456:1991 | Code of practice for stabilization and thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with polyurethane (PUR) foam systems |
BS 5617:1985 | Specification for urea-formaldehyde (UF) foam systems suitable for thermal insulation of cavity walls with masonry or concrete inner and outer leaves |
BS 3837:1977 | Specification for expanded polystyrene boards |
BS EN 1652:1998 | Copper and copper alloys. Plate, sheet, strip and circles for general purposes |
BS 3892:1965 | Pulverized fuel ash for concrete |
BS 476-20:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles) |
BS EN ISO 1461:2009 | Hot dip galvanized coatings on fabricated iron and steel articles. Specifications and test methods |
BS 5838-1:1980 | Specification for dry packaged cementitious mixes Prepacked concrete mixes |
BS 8215:1991 | Code of practice for design and installation of damp-proof courses in masonry construction |
BS 476-21:1987 | Fire tests on building materials and structures Methods for determination of the fire resistance of loadbearing elements of construction |
BS EN 573-3:2013 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Chemical composition and form of products |
BS 8000-16(1997) : 1997 | WORKMANSHIP ON BUILDING SITES - PART 16: CODE OF PRACTICE FOR SEALING JOINTS IN BUILDINGS USING SEALANTS |
BS 8102:1990 | Code of practice for protection of structures against water from the ground |
BS EN 942:2007 | Timber in joinery. General requirements |
BS 1881-5:1970 | Testing concrete Methods of testing hardened concrete for other than strength |
BS EN 490 : 2011 | CONCRETE ROOFING TILES AND FITTINGS FOR ROOF COVERING AND WALL CLADDING - PRODUCT SPECIFICATIONS |
BS 6457:1984 | Specification for reconstructed stone masonry units |
BS EN 1304:2013 | Clay roofing tiles and fittings. Product definitions and specifications |
BS 5838-2:1980 | Specification for dry packaged cementitious mixes Prepacked mortar mixes |
BS 6100-1:2004 | Building and civil engineering. Vocabulary General terms |
BS EN 515:2017 | Aluminium and aluminium alloys. Wrought products. Temper designations |
BS EN 485-2:2013 | Aluminium and aluminium alloys. Sheet, strip and plate Mechanical properties |
BS 1186-3:1990 | Timber for and workmanship in joinery Specification for wood trim and its fixing |
BS 5642-2(1983) : 1983 | SILLS, COPINGS AND CAPPINGS - PART 2: SPECIFICATION FOR COPINGS AND CAPPINGS OF PRECAST CONCRETE, CAST STONE, CLAYWARE, SLATE AND NATURAL STONE |
BS 6398:1983 | Specification for bitumen damp-proof courses for masonry |
BS 1197-2:1973 | Specification for concrete flooring tiles and fittings Metric units |
BS 6073-1:1981 | Precast concrete masonry units Specification for precast concrete masonry units |
BS 743:1970 | Specification for materials for damp-proof courses |
BS 6510:1984 | Specification for steel windows, sills, window boards and doors |
BS EN 845-1 : 2013 | SPECIFICATION FOR ANCILLARY COMPONENTS FOR MASONRY - PART 1: WALL TIES, TENSION STRAPS, HANGERS AND BRACKETS |
BS EN 485-1 : 2008 | ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - PART 1: TECHNICAL CONDITIONS FOR INSPECTION AND DELIVERY |
BS EN 573-4:2004 | Aluminium and aluminium alloys. Chemical composition and form of wrought products Forms of products |
BS EN 1172:2011 | Copper and copper alloys. Sheet and strip for building purposes |
BS 8221-2:2000 | Code of practice for cleaning and surface repair of buildings Surface repair of natural stones, brick and terracotta |
BS 8002:1994 | Code of practice for earth retaining structures |
BS 5618:1985 | Code of practice for thermal insulation of cavity walls (with masonry or concrete inner and outer leaves) by filling with urea-formaldehyde (UF) foam systems |
BS EN 771-1 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 1: CLAY MASONRY UNITS |
BS 476-22:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of non-loadbearing elements of construction |
BS 6649:1985 | Specification for clay and calcium silicate modular bricks |
BS EN 771-6 : 2011 | SPECIFICATION FOR MASONRY UNITS - PART 6: NATURAL STONE MASONRY UNITS |
BS 6925:1988 | Specification for mastic asphalt for building and civil engineering (limestone aggregate) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.