05/30128217 DC : DRAFT JAN 2005
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
ISO/DIS 23933 - AEROSPACE - ARAMID REINFORCED LIGHTWEIGHT POLYTETRAFLUOROETHYLENE (PTFE) HOSE ASSEMBLIES, CLASSIFICATION 135 DEGREE C/20 684 KPA (275 DEGREE F/3 000 PSI) AND 135 DEGREE C/21 000 KPA (275 DEGREE F/3 046 PSI) - PROCUREMENT SPECIFICATION
Superseded date
03-16-2006
Superseded by
Published date
11-23-2012
Publisher
Sorry this product is not available in your region.
| Committee |
ACE/69
|
| DocumentType |
Draft
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| EN 9100:2009 | Quality Management Systems - Requirements for Aviation, Space and Defense Organizations |
| SAE AMS 5645 : 2016 | STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED |
| BS 2S 145:1976 | Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (1270-1470 MPa) |
| PREN 3161 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 930 MPA |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| PREN 2539 : 200P2 | AEROSPACE SERIES - STEEL FE-PM 3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - BAR - A OR D <= 200 MM - R[M] >= 965 MPA |
| MIL-T-8808 Revision B:1981 | TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY |
| ISO 2685:1998 | Aircraft — Environmental test procedure for airborne equipment — Resistance to fire in designated fire zones |
| SAE AMS 5643 : 2016 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE AS 7112/2 : 1997 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FITTINGS AND OTHER MACHINED COMPONENTS |
| SAE AS 1055 : 2013 | FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS |
| AIR 9160 : 1992 | CONDITIONS GENERALES DE RECETTE ET D'EMPLOI DES ACIERS CORROYES UTILISES DANS LES CONSTRUCTIONS AERONAUTIQUES |
| ISO 6772:2012 | Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies |
| SAE AS 7003 : 2008 | NADCAP PROGRAM REQUIREMENTS |
| SAE AMS 5646 : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED |
| ISO 5855-3:1999 | Aerospace MJ threads Part 3: Limit dimensions for fittings for fluid systems |
| ISO 7258:1984 | Polytetrafluoroethylene (PTFE) tubing for aerospace applications Methods for the determination of the density and relative density |
| PREN 3487 : 200P2 | AEROSPACE SERIES - STEEL FE-PA3601 (X6CRNITI18-10) - AIR MELTED - SOFTENED - BAR FOR MACHINING - A OR D <= 250 MM - 500 MPA <= R[M] <= 700 MPA |
| SAE AMS 4945 : 2014 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED |
| PREN 3162 : 200P1 | AEROSPACE SERIES - STEEL FE-PM3801 (X5CRNICU17-4) - AIR MELTED - SOLUTION TREATED AND PRECIPITATION TREATED - SHEET AND STRIP - A <= 6 MM - R[M] >= 930 MPA |
| BS 2S 129:1976 | Specification for 18/9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm) |
| AIR 9423 : 1992 | |
| ISO 9001:2015 | Quality management systems — Requirements |
| SAE AS 1241 : 2016 | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| SAE AMS 5639 : 2017 | STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED |
| PREN 9133 : 200P1 | AEROSPACE SERIES - QUALITY MANAGEMENT SYSTEMS - QUALIFICATION PROCEDURE FOR AEROSPACE STANDARD PRODUCTS |
| SAE AS 150 : 2014 | HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE |
| PREN 3311 : 200P2 | AEROSPACE SERIES - TITANIUM ALLOY TI-P64001 - ANNEALED - BAR FOR MACHINING - D <= 150 MM |
| SAE AMS5644E:1964(S2017) | STEEL, BARS AND FORGINGS, CORROSION RESISTANT, 17CR - 7NI - 1AL |
| PREN 3468 : 200P1 | AEROSPACE SERIES - STEEL FE-PA13 - SOFTENED - 500 < R[M] <= 700 MPA - FORGINGS - D[E] <= 100 MM |
| ISO 8829-2:2006 | Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 2: Non-metallic braid |
| ISO 3161:1999 | Aerospace — UNJ threads — General requirements and limit dimensions |
| SAE AMS 4928 : 2016 | TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED |
| BS T 72-T 73:1977 | Specifications for 18/10 chromium-nickel corrosion-resisting steel tube for hydraulic purposes (niobium/titanium stabilized: 550 MPa) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.