(INACTIVE RECORD)IEEE C50.12 : 2005
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
SALIENT-POLE 50 HZ AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE
10-18-2023
01-01-2005
1 Scope
2 Normative references
3 Definitions
Cooling classification
Coolant types
4 Operational requirements
4.1 Service conditions and steady-state duty
4.2 Transient event and emergency duty requirements
4.3 Service environment
5 Rating and performance characteristics
5.1 Output rating
5.2 Capability
5.3 Stator voltage rating
5.4 Power factor and reactive power capability
5.5 Rotor voltage ratings
5.6 Short-circuit ratio
5.7 Transient and subtransient reactances
5.8 Voltage wave shape
5.9 Torques
6 Insulation systems
6.1 Insulation systems defined
6.2 Classes of insulation systems
6.3 The use of different classes of insulation systems
7 Temperatures and temperature limits
7.1 Temperature limits
7.2 Methods of temperature determination
7.3 Locations of embedded temperature detectors
7.4 Location of coolant temperature detectors
8 Efficiency
8.1 Methods
8.2 Reference conditions
8.3 Types of losses
8.4 Test tolerance on losses
9 Tests
9.1 Categories and scope of tests
9.2 Test procedural requirements
9.3 Heat exchanger testing
9.4 Testing high-voltage terminal bushings
10 Marking
10.1 Nameplate
10.2 Other marking
10.3 Terminal markings
Annex A (informative) Bibliography
Annex B (normative) TIF weighting factors
Pertains to all types of 50 Hz and 60 Hz salient-pole synchronous generators and generator/motors rated 5 MVA and above to be used for hydraulic turbine or hydraulic pump/turbine applications.
| DevelopmentNote |
Supersedes IEEE DRAFT C50.12. (02/2006) Supersedes ANSI C50.12. (10/2007)
|
| DocumentType |
Standard
|
| PublisherName |
Institute of Electrical & Electronics Engineers
|
| Status |
Withdrawn
|
| Supersedes |
| IEEE 1095-2012 REDLINE | IEEE Guide for the Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications |
| IEEE 1665 : 2009 | GUIDE FOR THE REWIND OF SYNCHRONOUS GENERATORS, 50 HZ AND 60 HZ, RATED 1 MVA AND ABOVE |
| IEEE 810-2015 | IEEE Standard for Hydraulic Turbine and Generator Shaft Couplings and Shaft Runout Tolerances |
| IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| IEEE DRAFT C37.102 : D8 2006 | AC GENERATOR PROTECTION |
| IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
| IEEE 1547-2003 | IEEE Standard for Interconnecting Distributed Resources with Electric Power Systems |
| IEEE 421.6-2017 | IEEE Recommended Practice for the Specification and Design of Field Discharge Equipment for Synchronous Machines |
| IEEE 1129-2014 | IEEE Guide for Online Monitoring of Large Synchronous Generators (10 MVA and Above) |
| IEEE C62.92.2-1989 | IEEE Guide for the Application of Neutral Grounding in Electrical Utility Systems, Part II - Grounding of Synchronous Generator Systems |
| IEEE C37.246-2017 | IEEE Guide for Protection Systems of Transmission-to-Generation Interconnections |
| IEEE C37.102-2006 REDLINE | IEEE Guide for AC Generator Protection |
| IEEE 434-2006 | IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
| NEMA MG 1 : 2016 | MOTORS AND GENERATORS |
| IEC 60034-3:2007 | Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines |
| IEEE 4-2013 | IEEE Standard for High-Voltage Testing Techniques |
| ISO 7919-5:2005 | Mechanical vibration Evaluation of machine vibration by measurements on rotating shafts Part 5: Machine sets in hydraulic power generating and pumping plants |
| IEEE 1310-2012 REDLINE | IEEE Recommended Practice for Thermal Cycle Testing of Form-Wound Stator Bars and Coils for Large Rotating Machines |
| ISO 3746:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane |
| IEEE 95-2002 | IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
| IEEE 115-2009 REDLINE | IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
| IEEE 1434-2014 | IEEE Guide for the Measurement of Partial Discharges in AC Electric Machinery |
| IEC 60034-1:2017 | Rotating electrical machines - Part 1: Rating and performance |
| IEEE 43-2013 REDLINE | IEEE Recommended Practice for Testing Insulation Resistance of Electric Machinery |
| IEEE 286-2000 | IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.