VDI 3803-1 : 2010 COR 2010
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AIR-CONDITIONING - CENTRAL AIR-CONDITIONING SYSTEMS - STRUCTURAL AND TECHNICAL PRINCIPLES (VDI VENTILATION CODE OF PRACTICE)
Available format(s)
Hardcopy , PDF
Superseded date
07-05-2020
Superseded by
Language(s)
German - English
Published date
01-10-2010
Publisher
Preliminary note
Introduction
1. Scope
2. Normative references
3. Abbreviations
4. General requirements
5. Technical requirements for AHUs
6. Technical requirements for decentral components
of HVAC-systems
7. Control and regulation requirements
8. Commissioning requirements
Annex A - Designation of types of air according to EN 13779
Annex B - Quality of water in HVAC systems
Bibliography
Describes the planning and installation of central HVAC systems in which the components (e. g. induction units) are connected to a central AHU by an air duct system.
| DevelopmentNote |
Supersedes VDI 3803. (02/2010)
|
| DocumentType |
Standard
|
| Pages |
2
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| VDI 6022 Blatt 1.1:2012-08 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Checking of ventilation and air-conditioning systems (VDI Ventilation Code of Practice) |
| VDI 6022 Blatt 1.2:2014-06 | Ventilation and indoor-air quality - Hygiene requirements for ventilation and air-conditioning systems and units - Requirements for underground components (VDI Ventilation Code of Practice) |
| VDI 4250 Blatt 2:2015-11 | Bioaerosols and biological agents - Environmental health assessment of bioaerosols in ambient air - Risk assessment for aerosols containing Legionella |
| DIN 1946-7:2009-07 | Ventilation and air conditioning - Part 7: Ventilation systems in laboratories |
| VDI 2082:2010-07 | Air-conditioning - Sales outlets (VDI ventilation code of practice) |
| VDI 2052 Blatt 1:2017-04 | Air conditioning - Kitchens (VDI Ventilation Code of Practice) |
| VDI 2050 Blatt 4:2011-11 | Requirements for mechanical equipment rooms - Ventilation and air-conditioning |
| VDI 2262 Blatt 3:2011-06 | Workplace air - Reduction of exposure to air pollutants - Ventilation technical measures |
| VDI 2050 Blatt 1:2013-11 | Requirements for technical equipment rooms - Technical bases for planning and execution |
| VDI 6032 Blatt 1:2015-05 | Ventilation and indoor-air quality in vehicles - Hygiene requirements for ventilation and air-conditioning systems |
| VDI 3803 Blatt 4:2012-09 | Air-conditioning, system requirements - Air filter systems (VDI Ventilation Code of Practice) |
| VDI 6004 Blatt 3:2009-05 | Protection for building services - Vandalism or destruction of property |
| VDI 2053 Blatt 1:2014-12 | Air conditioning - Car parks - Exhaust ventilation (VDI Ventilation Code of Practice) |
| VDI 3803 Blatt 5:2013-04 | Air-conditioning, system requirements - Heat recovery systems (VDI Ventilation Code of Practice) |
| VDI 3810 Blatt 2:2010-05 | Operation and maintenance of building installations - Sanitary systems |
| VDI 3802 Blatt 1:2014-09 | Air conditioning systems for factories |
| VDI 2083 Blatt 4.2:2011-04 | Cleanroom technology - Energy efficiency |
| VDI 2050 Blatt 2:2011-11 | Requirements for mechanical equipment rooms - Sanitary engineering |
| VDI 3476 Blatt 2:2010-01 | Waste gas cleaning - Catalytic waste gas cleaning methods - Oxidative processes |
| VDI 3803 Blatt 2:2017-09 (Draft) | Ventilation and air conditioning - Structural and technical principles - Decentralized ventilation units (VDI ventilation code of practice) |
| VDI 2087 : 2006 COR 2008 | Air ducts - Operating and construction fundamentals - Corrigendum concerning guideline VDI 2087:2006-12 |
| EN 1886:2007 | Ventilation for buildings - Air handling units - Mechanical performance |
| EN 15251:2007 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| DIN V 4133:2007-07 | FREE-STANDING STEEL STACKS |
| DIN EN 12237:2003-07 | VENTILATION FOR BUILDINGS - DUCTWORK - STRENGTH AND LEAKAGE OF CIRCULAR SHEET METAL DUCTS |
| EN 1507:2006 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| EN 13053:2006+A1:2011 | Ventilation for buildings - Air handling units - Rating and performance for units, components and sections |
| EN 1505:1997 | Ventilation for buildings - Sheet metal air ducts and fittings with rectangular cross section - Dimensions |
| VDI 6023 Blatt 1:2006-07 | Hygiene for drinking water supply systems - Requirements for planning, design, operation, and maintenance |
| VDI 6026 Blatt 1:2008-05 | Documentation in the building services - Contents and format of planning, execution and review documents |
| EN 13403:2003 | Ventilation for buildings - Non-metallic ducts - Ductwork made from insulation ductboards |
| VDI 2050 Blatt 1:2013-11 | Requirements for technical equipment rooms - Technical bases for planning and execution |
| EN ISO 14121-1:2007 | Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007) |
| VDI 2050 Blatt 4:2011-11 | Requirements for mechanical equipment rooms - Ventilation and air-conditioning |
| DIN EN 1505:1998-02 | VENTILATION FOR BUILDINGS - SHEET METAL AIR DUCTS AND FITTINGS WITH RECTANGULAR CROSS-SECTION - DIMENSIONS |
| EN 12101-3:2015 | Smoke and heat control systems - Part 3: Specification for powered smoke and heat control ventilators (Fans) |
| VDI 3814 Blatt 1:2009-11 | Building automation and control systems (BACS) - System basics |
| VDI 6028 Blatt 4.1:2006-02 | Assesment criteria for building services - Requirement profiles and valuation criteria for ventilation and air conditioning |
| EN 12599:2012 | Ventilation for buildings - Test procedures and measurement methods to hand over air conditioning and ventilation systems |
| VDI 6004 Blatt 2:2007-07 | Protection of building services - Lightning protection systems and surge protection |
| ISO 14121-1:2007 | Safety of machinery Risk assessment Part 1: Principles |
| DIN EN 12599:2013-01 | VENTILATION FOR BUILDINGS - TEST PROCEDURES AND MEASUREMENT METHODS TO HAND OVER AIR CONDITIONING AND VENTILATION SYSTEMS |
| DIN EN 1751:2014-06 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
| EN 1506:2007 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| DIN EN 15251:2012-12 | Indoor environmental input parameters for design and assessment of energy performance of buildings addressing indoor air quality, thermal environment, lighting and acoustics |
| EN 12237:2003 | Ventilation for buildings - Ductwork - Strength and leakage of circular sheet metal ducts |
| VDI 2081 Blatt 1:2001-07 | Noise generation and noise reduction in air-conditioning systems |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| VDI 6004 Blatt 3:2009-05 | Protection for building services - Vandalism or destruction of property |
| VDI 2071:1997-12 | Heat recovery in heating, ventilation and air conditioning plants |
| DIN EN 12236:2002-04 | VENTILATION FOR BUILDINGS - DUCTWORK - HANGERS AND SUPPORTS, REQUIREMENTS FOR STRENGTH |
| VDI 3819 Blatt 1:2016-10 | Fire protection for buildings - Fundamentals for building services - Terminology, acts, ordinances, technical rules |
| EN 308:1997 | Heat exchangers - Test procedures for establishing performance of air to air and flue gases heat recovery devices |
| VDI 3525:2007-01 | Automation and control of air-conditioning systems - Examples |
| EN 12236:2002 | Ventilation for buildings - Ductwork hangers and supports - Requirements for strength |
| VDI 3801:2000-06 | Operating of air-conditioning systems |
| DIN EN ISO 14121-1:2007-12 | SAFETY OF MACHINERY - RISK ASSESSMENT - PART 1: PRINCIPLES |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| DIN EN 13403:2003-08 | VENTILATION FOR BUILDINGS - NON-METALLIC DUCTS - DUCTWORK MADE FROM INSULATION DUCTBOARDS |
| EN 1751:2014 | Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves |
| DIN EN 12101-3:2015-12 | SMOKE AND HEAT CONTROL SYSTEMS - PART 3: SPECIFICATION FOR POWERED SMOKE AND HEAT CONTROL VENTILATORS (FANS) |
| DIN EN 1506:2007-09 | Ventilation for buildings - Sheet metal air ducts and fittings with circular cross-section - Dimensions |
| EN 13779:2007 | Ventilation for non-residential buildings - Performance requirements for ventilation and room-conditioning systems |
| VDI 6035:2009-09 | Ventilation and air-conditioning technology - Decentralized ventilation systems - Wall-mounted air-conditioners (VDI ventilation code of practice) |
| VDI 3804:2009-03 | Air-conditioning - Office buildings (VDI ventilation code of practice) |
| DIN EN 1507:2006-07 | Ventilation for buildings - Sheet metal air ducts with rectangular section - Requirements for strength and leakage |
| DIN EN 13501-1:2010-01 | FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
| EN 12097:2006 | Ventilation for Buildings - Ductwork - Requirements for ductwork components to facilitate maintenance of ductwork systems |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.