UNE-EN ISO 15791-1:2014
Current
Current
The latest, up-to-date edition.
Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014)
Available format(s)
Hardcopy , PDF
Language(s)
Spanish, Castilian, English
Published date
29-07-2014
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Types of plastics and typical products
5 Fire scenarios
6 Thermal characteristics of ignition sources
7 Design requirements
8 Examples of intermediate-scale test facilities
9 Test report
Bibliography
Presents a framework guide for the development and use of intermediate-scale fire tests for products made of or containing plastics.
| Committee |
CTN 53/SC 6
|
| DocumentType |
Standard
|
| Pages |
28
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 15791-1 : 2014 | Identical |
| ISO 15791-1:2014 | Identical |
| NBN EN ISO 15791-1 : 2014 | Identical |
| NEN EN ISO 15791-1 : 2014 | Identical |
| NS EN ISO 15791-1 : 2013 | Identical |
| I.S. EN ISO 15791-1:2013 | Identical |
| SN EN ISO 15791-1:2014 | Identical |
| UNI EN ISO 15791-1 : 2014 | Identical |
| BS EN ISO 15791-1:2013 | Identical |
| EN ISO 15791-1:2013 | Identical |
| DIN EN ISO 15791-1:2014-05 | Identical |
| IEC 60695-11-20:2015 | Fire hazard testing - Part 11-20: Test flames - 500 W flame test method |
| ISO 4589-3:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 3: Elevated-temperature test |
| ISO 5660-1:2015 | Reaction-to-fire tests Heat release, smoke production and mass loss rate Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) |
| ISO/TS 5660-3:2012 | Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 3: Guidance on measurement |
| ISO 5658-2:2006 | Reaction to fire tests Spread of flame Part 2: Lateral spread on building and transport products in vertical configuration |
| ISO 13784-2:2002 | Reaction-to-fire tests for sandwich panel building systems Part 2: Test method for large rooms |
| ISO 10093:1998 | Plastics Fire tests Standard ignition sources |
| ISO 9705:1993 | Fire tests Full-scale room test for surface products |
| DIN 54341:1988-01 | TESTING OF SEATS IN RAILWAYS FOR PUBLIC TRAFFIC; DETERMINATION OF BURNING BEHAVIOUR WITH A PAPER PILLOW IGNITION SOURCE |
| ISO 5659-2:2017 | Plastics — Smoke generation — Part 2: Determination of optical density by a single-chamber test |
| ISO 9773:1998 | Plastics — Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source |
| ISO 12992:2017 | Plastics — Vertical flame spread determination for film and sheet |
| VDE 0472-804 : 1989 | TESTING OF CABLES, WIRES & FLEXIBLE CORDS - BURNING BEHAVIOUR |
| NFX 70 100 : 1986 | ESSAIS DE COMPORTEMENT AU FEU - ANALYSE DE GAZ PROVENANT DE LA DEGRADATION THERMIQUE - PARTIE 1: METHODE D'ANALYSES DES EFFLUENTS GAZEUX |
| ISO 13943:2017 | Fire safety — Vocabulary |
| ISO 5658-4:2001 | Reaction to fire tests — Spread of flame — Part 4: Intermediate-scale test of vertical spread of flame with vertically oriented specimen |
| DIN 4102-1:1998-05 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 1: BUILDING MATERIALS; CONCEPTS, REQUIREMENTS AND TESTS |
| ISO 24473:2008 | Fire tests — Open calorimetry — Measurement of the rate of production of heat and combustion products for fires of up to 40 MW |
| BS 5852:2006 | Methods of test for assessment of the ignitability of upholstered seating by smouldering and flaming ignition sources |
| ISO/TR 3814:1989 | Tests for measuring "reaction-to-fire" of building materials — Their development and application |
| EN 13823:2010+A1:2014 | Reaction to fire tests for building products - Building products excluding floorings exposed to the thermal attack by a single burning item |
| BS 476-20:1987 | Fire tests on building materials and structures Method for determination of the fire resistance of elements of construction (general principles) |
| ISO 19702:2015 | Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared (FTIR) spectroscopy |
| ISO/TR 11696-1:1999 | Uses of reaction to fire test results Part 1: Application of test results to predict fire performance of internal linings and other building products |
| ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| ISO 14696:2009 | Reaction-to-fire tests Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL) |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| ISO/TR 13387-2:1999 | Fire safety engineering Part 2: Design fire scenarios and design fires |
| ISO 80000-1:2009 | Quantities and units — Part 1: General |
| ISO 20632:2008 | Reaction-to-fire tests — Small room test for pipe insulation products or systems |
| ISO 4589-2:2017 | Plastics — Determination of burning behaviour by oxygen index — Part 2: Ambient-temperature test |
| DIN 54837:2007-12 | TESTING OF MATERIALS, SMALL COMPONENTS AND COMPONENT SECTIONS FOR RAIL VEHICLES - DETERMINATION OF BURNING BEHAVIOUR USING A GAS BURNER |
| ISO 13784-1:2014 | Reaction to fire test for sandwich panel building systems — Part 1: Small room test |
| ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
| ISO/TR 11696-2:1999 | Uses of reaction to fire test results Part 2: Fire hazard assessment of construction products |
| ISO 21367:2007 | Plastics — Reaction to fire — Test method for flame spread and combustion product release from vertically oriented specimens |
| IEC 61034-2:2005+AMD1:2013 CSV | Measurement of smoke density of cables burning under definedconditions - Part 2: Test procedure and requirements |
| DIN 4102-7:1998-07 | FIRE BEHAVIOUR OF BUILDING MATERIALS AND BUILDING COMPONENTS - PART 7: ROOFING; DEFINITIONS, REQUIREMENTS AND TESTING |
| ISO/TR 11925-1:1999 | Reaction to fire tests Ignitability of building products subjected to direct impingement of flame Part 1: Guidance on ignitability |
| ISO 14697:2007 | Reaction-to-fire tests — Guidance on the choice of substrates for building and transport products |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.