SAE AMS3259B
Current
The latest, up-to-date edition.
Sealing Compound, Polythioether Nonchromated, Corrosion Inhibiting for Intermittent Use to 360°F (182°C)
Hardcopy , PDF
English
25-07-2005
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGEMENT
7 REJECTIONS
8 NOTES
Describes a two-component polythioether sealing compound corrosion inhibitors system for curing at room temperatures.
| DocumentType |
Standard
|
| Pages |
35
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This specification covers a polythioether sealing compound with nonchromated corrosion inhibitors supplied as a two-component system which cures at room temperature.The compound has been used typically for faying surface sealing and for wet-installation of fasteners in aircraft structural joints, but usage is not limited to such applications. This compound is also suitable for fillet sealing and overcoating fasteners in nonfuel areas. The sealing compounds are usable from -65 to +320 degrees F (-54 to +160 degrees C) with short term (six hour) exposures up to 36 degrees F (182 degrees C).
| PPP-C-96 Revision E:1992 | CAN, METAL, 28 GAGE AND LIGHTER |
| FED-STD-601 Base Document:1955 | RUBBER, SAMPLING AND TESTING |
| SAE AMS4049M | Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated |
| PPP-B-636 Revision J:1981 | BOX, SHIPPING, FIBERBOARD |
| MS24694 Revision C:1969 | SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEG, STRUCTURAL, CROSS RECESSED, UNC-3A AND UNF-3A |
| SAE AMS3276F | Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) |
| SAE AMS4911N | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed |
| MIL-A-9962 Revision A:1966 | ABRASIVE MATS, NON-WOVEN, NON-METALLIC |
| SAE AMS3819C | Cloths, Cleaning For Aircraft Primary and Secondary Structural Surfaces |
| SAE AS7202 | NATIONAL AERSPACE AND DEFENSE CONTRACTORS ACCREDDITATION PROGRAM (NADCAP)REQUIREMENTS FOR ACCREDITATION OF VALUE ADDED DISTRIBUTORS |
| MIL-C-27725 Revision B:1969 | COATING, CORROSION PREVENTIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS |
| MIL C 85285 : C | |
| SAE AMS4037Q | Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated |
| MIL L 81352 : A | LACQUER, ACRYLIC (FOR NAVAL WEAPONS SYSTEMS) |
| SAE AMS4045L | Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated |
| MIL S 5002 : D | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| MIL-S-7839 Revision B:1973 | SCREW, STRUCTURAL, AIRCRAFT |
| ASTM D 792 : 2013 : REDLINE | Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement |
| SAE AMS5516P | Steel, Corrosion-Resistant, Sheet, Strip, and Plate 18Cr - 9.0Ni (SAE 30302) Solution Heat Treated |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| MIL-T-9046 Revision J:1983 | TITANIUM AND TITANIUM ALLOY, SHEET, STRIP AND PLATE |
| SAE AS7003D | Nadcap Program Requirements |
| TT-N-97 Revision D:2007 | Naphtha; Aromatic |
| SAE MAM4911B | Titanium Alloy, Sheet, Strip, and Plate, 6al 4v, Annealed |
| SAE AMS3100D | Adhesion Promoter For Polysulfide Sealing Compounds |
| SAE AS7001 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP)PROGRAM DESCRIPTION |
| SAE AS7002 | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP)RULES FOR IMPLEMENTATION |
| SAE AMS3020A | Oil, Reference, for “L” Stock Rubber Testing |
| CCC-C-419 Revision G:1989 | CLOTH, DUCK, UNBLEACHED, PLIED-YARNS, ARMY AND NUMBERED |
| MIL-C-38736 Revision B Base Document:1984 | CLEANING COMPOUND, SOLVENT MIXTURES (METRIC) |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| MIL-C-38334 Revision A:1971 | CORROSION REMOVING COMPOUND, PREPAINT, FOR AIRCRAFT ALUMINUM SURFACES |
| PPP-D-729 Revision E:1977 | DRUMS, SHIPPING AND STORAGE, STEEL, 55 GALLON (208 LITERS) |
| SAE AMS2629E | Fluid, Jet Reference |
| SAE AMS2400X | Plating, Cadmium |
| SAE AMS2825B | Material Safety Data Sheets |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| NAS679:2010 | NUT, SELF-LOCKING, HEXAGON, LOW HEIGHT |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| SAE AMS2471H | Anodic Treatment of Aluminum Alloys Sulfuric Acid Process, Undyed Coating |
| SAE AS7200/1A | NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP)AUDIT AND INSPECTION PROCEDURES AND CHECKLISTS FOR THE SEALANT MANUFACTURERS ACCREDITATION PROGRAM |
| SAE AMS4901T | Titanium Sheet, Strip, and Plate Commercially Pure Annealed, 70.0 ksi (485 MPa) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.