SAE AMS1548B
Current
The latest, up-to-date edition.
Cleaner, Turbine Engine Gas Path Solvent Emulsion Type
Hardcopy , PDF
English
01-06-2017
1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES
Specifies a solvent-emulsion cleaner in the form of a solvent-base liquid concentrate.
| DocumentType |
Standard
|
| Pages |
13
|
| ProductNote |
THIS STANDARD IS STABILIZED
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
This specification covers a solvent-emulsion cleaner in the form of a solvent-base liquid concentrate
| SAE AMS2416L | Plating, Nickel-Cadmium Diffused |
| ASTM D 4192 : 2015 : REDLINE | Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry |
| SAE AMS4049M | Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated |
| SAE AMS2475G | Protective Treatments Magnesium Alloys |
| SAE AMS4911N | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed |
| SAE AMS5608G | Cobalt Alloy, Corrosion and Heat Resistant, Sheet, Strip, and Plate 40Co - 22Cr - 22Ni - 14.5W - 0.07La Solution Heat Treated |
| ASTM D 4191 : 2015 : REDLINE | Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry |
| ASTM D 1141 : 1998 : EDT 1 | Standard Practice for the Preparation of Substitute Ocean Water |
| SAE ARP 1512 : 1995 | CORROSION OF ALUMINUM ALLOYS BY AIRCRAFT MAINTENANCE CHEMICALS, SANDWICH TEST |
| MIL C 85704 : B | CLEANING COMPOUND, TURBINE ENGINE GAS PATH |
| SAE AMS 5504 : 2002 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 12.5CR (410), ANNEALED |
| SAE AMS5536N | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 47.5Ni - 22Cr - 1.5Co - 9.0Mo - 0.60W - 18.5Fe Solution Heat Treated |
| SAE AMS4037Q | Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated |
| SAE AMS4045L | Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated |
| SAE AMS5544K | Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.0Ti - 1.4Al - 0.05Zr - 0.006B Consumable Electrode or Vacuum Induction Melted, Annealed |
| SAE ARP 1862 : 1991 | CLEANING EFFICIENCY OF TURBINE ENGINE GAS PATH CLEANERS, LABORATORY TEST METHOD |
| ASTM E 70 | TEST METHOD FOR PH OF AQUEOUS SOLUTIONS WITH THE GLASS ELECTRODE |
| SAE AMS5510S | Steel, Corrosion and Heat-Resistant, Sheet, Strip and Plate 18Cr - 10.5Ni - 0.40Ti (SAE 30321) Solution Heat Treated |
| SAE AMS2350BA | Standards and Test Methods |
| MIL-C-81751 Revision B:1972 | Coating, Metallic-Ceramic |
| SAE AMS4025M | Aluminum Alloy, Sheet and Plate 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-O) Annealed |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| MIL-STD-794 Revision E:1982 | PART AND EQUIPMENT, PROCEDURES FOR PACKAGING AND PACKING OF |
| SAE AMS2400X | Plating, Cadmium |
| SAE AMS2825B | Material Safety Data Sheets |
| SAE AMS4916K | Titanium Alloy Sheet, Strip, and Plate 8Al - 1Mo - 1V Duplex Annealed |
| SAE AMS5040N | Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade |
| ASTM E 442 : 1991 | Test Method for Chlorine, Bromine, or Iodine in Organic Compounds by Oxygen Flask Combustion (Withdrawn 1997) |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.