SAE AMS 1377 : 2012
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
REMOVER, PAINT, EPOXY AND POLYURETHANE PAINT SYSTEM, NON-CHLORINATED SOLVENT
Hardcopy , PDF
03-08-2021
English
23-02-2012
1 SCOPE
2 APPLICABLE DOCUMENTS
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PREPARATION FOR DELIVERY
6 ACKNOWLEDGEMENT
7 REJECTIONS
8 NOTES
Describes a solvent-based liquid non-phenolic, non-chromated, thickened paint remover, for removal of epoxy primer with epoxy polyamide or linear polyurethane paint topcoat from aluminum and magnesium alloys.
| Committee |
AMS-J
|
| DocumentType |
Standard
|
| Pages |
11
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy |
| SAE AMS2473H | Chemical Film Treatment for Aluminum Alloys General Purpose Coating |
| SAE AMS4049M | Aluminum Alloy, Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075; -T6 Sheet - T651 Plate) Solution and Precipitation Heat Treated |
| SAE AMS2475G | Protective Treatments Magnesium Alloys |
| AN 960 : 0021 | WASHER, FLAT |
| SAE AMS4911N | Titanium Alloy, Sheet, Strip, and Plate 6Al - 4V Annealed |
| MIL-A-9962 Revision A:1966 | ABRASIVE MATS, NON-WOVEN, NON-METALLIC |
| SAE AMS4037Q | Aluminum Alloy, Sheet and Plate 4.4Cu - 1.5Mg - 0.60Mn (2024; -T3 Flat Sheet, -T351 Plate) Solution Heat Treated |
| SAE AMS4045L | Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated |
| SAE AS4041B | Air Mode General Purposes Containers |
| MIL P 23377 : G | PRIMER COATING, EPOXY, HIGH SOLIDS |
| AN315 Revision 10:1972 | NUT, PLAIN, AIRFRAME |
| SAE MAM4911B | Titanium Alloy, Sheet, Strip, and Plate, 6al 4v, Annealed |
| MIL C 22750 : F | COATING, EPOXY, VOC-COMPLIANT |
| MIL C 5541 : E | CHEMICAL CONVERSION COATINGS ON ALUMINUM AND ALUMINUM ALLOYS |
| ASTM D 93 : 2016-07 | TEST METHODS FOR FLASH POINT BY PENSKY-MARTENS CLOSED CUP TESTER |
| PPP-D-729 Revision E:1977 | DRUMS, SHIPPING AND STORAGE, STEEL, 55 GALLON (208 LITERS) |
| SAE AMS2400X | Plating, Cadmium |
| SAE AMS2825B | Material Safety Data Sheets |
| SAE AMS6350N | Steel Sheet, Strip, and Plate 0.95Cr - 0.20Mo (0.28 - 0.33C) (SAE 4130) |
| PPP-P-704 Revision E:1981 | Pails, Metal: (Shipping, Steel, 1 through 12 Gallons) |
| SAE AMS5040N | Steel, Sheet and Strip 0.15 Carbon, Maximum Deep Forming Grade |
| MIL-T-23397 Revision B:1970 | TAPE, PRESSURE-SENSITIVE ADHESIVE, FOR MASKING DURING PAINT STRIPPING OPERATIONS |
| FED-STD-141 Revision D:2001 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, METHODS OF INSPECTION, SAMPLING AND TESTING |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| MIL-C-83286 Revision B:1973 | COATING URETHANE, ALIPHATIC ISOCYANATE, FOR AEROSPACE APPLICATIONS |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| SAE AMS2470N | Anodic Treatment of Aluminum Alloys Chromic Acid Process |
| PPP-P-1892 Base Document:1974 | PAINT, VARNISH, LACQUER AND RELATED MATERIALS, PACKAGING, PACKING, AND MARKING OF |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.