SAE AIR 4766/1 : 2011
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
AIR QUALITY FOR COMMERCIAL AIRCRAFT CABIN - PARTICULATE CONTAMINANTS
Hardcopy , PDF
07-08-2020
English
01-01-2011
1 SCOPE
1.1 Purpose
2 REFERENCES
2.1 Applicable Documents
2.2 Definitions
2.3 Acronyms
3 AIR QUALITY REGULATIONS
4 SOURCES AND TYPES OF CONTAMINANTS
4.1 Types and Size Ranges of Contaminants
4.2 Potential Sources
5 METHODS OF CONTROL
5.1 Control of Particulate Ingestion or Concentration
5.2 Dilution
5.3 Removal Methods
6 RECIRCULATION FILTERS
6.1 Filter Location
6.2 Efficiency
6.3 Differential Pressure
6.4 Filter Loading
6.5 Dust Holding Capacity
6.6 Filter Test Methods
6.7 Filter Classification
6.8 Filter Behaviors
7 OTHER PARTICULATE AND BIOCONTAMINANT CONTROL ISSUES
7.1 Filter Element Removal and Disposal
7.2 Best Practices for Cabin Particulate Cleaning
8 SUMMARY
Covers airbone particulate contaminants that may be present in commercial aircraft cabin air during operation.
| Committee |
AC-9
|
| DocumentType |
Standard
|
| Pages |
33
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| SAE ARP85F:2019 | Air Conditioning Systems for Subsonic Airplanes<br> |
| SAE AIR7063 | Environmental Control Systems (ECS) for Unmanned Aircraft (UA) |
| ASHRAE 52.1 : 0 | GRAVIMETRIC AND DUST SPOT PROCEDURES FOR TESTING AIR CLEANING DEVICES USED IN GENERAL VENTILATION FOR REMOVING PARTICULATE MATTER |
| ASHRAE 52.2 : 2017 | METHOD OF TESTING GENERAL VENTILATION AIR-CLEANING DEVICES FOR REMOVAL EFFICIENCY BY PARTICLE SIZE |
| CFR 29(PTS1900-1910) : 0 | LABOR - OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR |
| SAE ARP4418A | Procedure for Sampling and Measurement of Engine and APU Generated Contaminants in Bleed Air Supplies from Aircraft Engines |
| FAA 8110.4 : 2011 | TYPE CERTIFICATION |
| EN 1822-5:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 5: Determining the efficiency of filter elements |
| SAE ARP85F | Air Conditioning Systems for Subsonic Airplanes |
| SAE ARP1270B | Aircraft Cabin Pressurization Criteria |
| EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
| EN 1822-2:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 2: Aerosol production, measuring equipment, particle counting statistics |
| ASHRAE 62 : 2001 | VENTILATION FOR ACCEPTABLE INDOOR AIR QUALITY |
| ASTM D 6399 : 2010-07 | GUIDE FOR SELECTING INSTRUMENTS AND METHODS FOR MEASURING AIR QUALITY IN AIRCRAFT CABINS |
| BS 3928:1969 | Method for sodium flame test for air filters (other than for air supply to I.C. engines and compressors) |
| EN 1822-3:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 3: Testing flat sheet filter media |
| EN 1822-1:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking |
| EN 1822-4:2009 | High efficiency air filters (EPA, HEPA and ULPA) - Part 4: Determining leakage of filter elements (scan method) |
| SAE AIR 1609 : 2005 | AIRCRAFT HUMIDIFICATION |
| NFX 44 012 : 1982 | CLEANING EQUIPMENT FOR AIR AND OTHER GASES - METHOD OF TESTING AIR FILTERS USED IN GENERAL VENTILATION |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.