PD CEN/TR 16912:2016
Current
The latest, up-to-date edition.
Guidelines for a procedure to support the European standardization of cements
Hardcopy , PDF
English
30-06-2016
Important note : All end users must be registered with an Account prior to user licenses being assigned.
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Procedure of application and standardization
of a new cement
5 Assessment of fitness for use
6 Patents and other intellectual property rights
(IPR) relevant for the standardization of the
new cement
Bibliography
Gives guidance for the procedure to be followed in order to support the European standardization of new cements that are not covered by an existing European Standard.
| Committee |
B/516/6
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This CEN Technical Report provides guidance for the procedure to be followed in order to support the European standardization of new cements that are not covered by an existing European Standard. The term \'new cement\' has been used in this document to describe its primary focus, however, this same guideline procedure may be used for other products to be standardized by CEN/TC 51.
| Standards | Relationship |
| CEN/TR 16912:2016 | Identical |
| EN 13282-1:2013 | Hydraulic road binders - Part 1: Rapid hardening hydraulic road binders - Composition, specifications and conformity criteria |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| CEN/TR 15177:2006 | Testing the freeze-thaw resistance of concrete - Internal structural damage |
| EN 196-7:2007 | Methods of testing cement - Part 7: Methods of taking and preparing samples of cement |
| CEN/TS 16516:2013 | Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air |
| EN 196-2:2013 | Method of testing cement - Part 2: Chemical analysis of cement |
| EN 197-1:2011 | Cement - Part 1: Composition, specifications and conformity criteria for common cements |
| CEN/TS 16637-2:2014 | Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test |
| EN 459-2:2010 | Building lime - Part 2: Test methods |
| EN 12350-2:2009 | Testing fresh concrete - Part 2: Slump-test |
| EN 196-5:2011 | Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement |
| EN 197-2:2014 | Cement - Part 2: Conformity evaluation |
| CEN/TR 196-4:2007 | Methods of testing cement - Part 4: Quantitative determination of constituents |
| EN 459-1:2015 | Building lime - Part 1: Definitions, specifications and conformity criteria |
| EN 15743:2010+A1:2015 | Supersulfated cement - Composition, specifications and conformity criteria |
| ISO 9286:1997 | Abrasive grains and crude Chemical analysis of silicon carbide |
| EN 12390-11:2015 | Testing hardened concrete - Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion |
| EN 933-9:2009+A1:2013 | Tests for geometrical properties of aggregates - Part 9: Assessment of fines - Methylene blue test |
| EN 196-1:2016 | Methods of testing cement - Part 1: Determination of strength |
| CEN/TR 15678:2008 | Concrete - Release of regulated dangerous substances into soil, groundwater and surface water - Test method for new or unapproved constituents of concrete and for production concretes |
| EN 196-10:2016 | Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement |
| EN 14216:2015 | Cement - Composition, specifications and conformity criteria for very low heat special cements |
| EN 13639:2017 | Determination of total organic carbon in limestone |
| EN 413-1:2011 | Masonry cement - Part 1: Composition, specifications and conformity criteria |
| EN 45020:2006 | Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004) |
| EN 13282-2:2015 | Hydraulic road binders - Part 2: Normal hardening hydraulic road binders - Composition, specifications and conformity criteria |
| CEN/TS 12390-9:2016 | Testing hardened concrete - Part 9: Freeze-thaw resistance with de-icing salts - Scaling |
| EN 451-1:2017 | Method of testing fly ash - Part 1: Determination of free calcium oxide content |
| EN 450-1:2012 | Fly ash for concrete - Part 1: Definition, specifications and conformity criteria |
| EN 413-2:2016 | Masonry cement - Part 2: Test methods |
| ISO/IEC Guide 2:2004 | Standardization and related activities — General vocabulary |
| EN 12878:2014 | Pigments for the colouring of building materials based on cement and/or lime - Specifications and methods of test |
| EN 45020 : 2006 | STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
| EN 196-8:2010 | Methods of testing cement - Part 8: Heat of hydration - Solution method |
| EN 196-3:2016 | Methods of testing cement - Part 3: Determination of setting times and soundness |
| EN 196-9:2010 | Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method |
| ISO 9277:2010 | Determination of the specific surface area of solids by gas adsorption — BET method |
| EN 480-11:2005 | Admixtures for concrete, mortar and grout - Test methods - Part 11: Determination of air void characteristics in hardened concrete |
| CEN/TR 16045:2010 | Construction Products - Assessment of release of dangerous substances - Content of regulated dangerous substances - Selection of analytical methods |
| EN 206:2013+A1:2016 | Concrete - Specification, performance, production and conformity |
| CEN/TS 12390-10:2007 | Testing hardened concrete - Part 10: Determination of the relative carbonation resistance of concrete |
| CEN/TR 16563:2013 | Principles of the equivalent durability procedure |
| EN 15368:2008+A1:2010 | Hydraulic binder for non-structural applications - Definition, specifications and conformity criteria |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.