NASA KSC STD E 0001 : 2008
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
DESIGN OF ELECTRICAL CONTROL AND MONITORING SYSTEMS, EQUIPMENT (GSE), AND PANELS, STANDARD FOR
23-07-2013
01-01-2008
1. SCOPE
2. APPLICABLE DOCUMENTS
2.1 Governmental
2.1.1 Specifications
2.1.2 Standards
2.1.3 Drawings
2.1.4 Policy Directives
2.1.5 Publications
2.2 Non-Governmental
2.3 Order of Precedence
3. REQUIREMENTS
3.1 General Requirements
3.1.1 Design Objectives
3.1.2 Parts
3.1.3 Programmable Logic Controllers
3.1.4 Software
3.1.5 Firmware
3.1.6 Documentation
3.1.7 Materials
3.1.8 Interchangeability
3.1.9 Maintenance Provisions
3.1.10 Self-Verification
3.1.11 Checkout Provisions
3.1.12 Environmental Protection
3.1.13 Special Tools
3.1.14 Human Factors
3.1.15 Marking
3.1.16 Workmanship
3.2 Detail
3.2.1 Electrical Power Requirements
3.2.2 Electromagnetic Compatibility Compliance
(ECC) Requirements
3.2.3 System Compatibility
3.2.4 Switching
3.2.5 Displays
3.3 Electrical Interconnections
3.3.1 Shielding
3.3.2 Internal Wiring
3.3.3 Electrical Power Cable
3.3.4 Instrumentation and Communication Cable
3.3.5 Fiber-Optic Cable
3.3.6 Electrical Control Cable
3.3.7 Electrical Cable
3.3.8 Wiring and Cabling
3.3.9 Potting and Molding of Electrical Connectors
3.4 Rack, Panels, and Modular Enclosures
3.4.1 Bonding and Groundling
3.4.2 Ignitionproofing
3.4.3 Welding
3.4.4 Soldering
3.4.5 Plating
3.4.6 Lacing and Typing
3.4.7 Fabrication
3.4.8 Finishing
3.4.9 Riveting
3.4.10 Inductors
3.4.11 Semiconductors
3.4.12 Connectors
3.4.13 Printed Circuit (PC) Boards
3.4.14 Sensors and Transducers
3.4.15 Relays
3.4.16 Switches
3.4.17 Fuses
3.4.18 Indicators
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. NOTES
6.1 Intended Use
6.2 Definitions
Describes the minimum design requirements for electrical control and monitoring systems, ground support equipment (GSE), and panels that support processing systems both automated (e.g., Launch Control System [LCS]) and manual.
| DocumentType |
Standard
|
| PublisherName |
National Aeronautics and Space Administration
|
| Status |
Withdrawn
|
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| NASM 35206 : 2004 | SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CARBON STEEL, UNC-2A |
| MIL-DTL-5015 Revision H:2000 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR |
| MIL C 83522 : D | CONNECTORS, FIBER OPTIC, SINGLE TERMINUS, GENERAL SPECIFICATION FOR |
| NEMA MW 1000 : 2016 | MAGNET WIRE |
| MIL-DTL-3890 Revision C:2013 | LINES, RADIO FREQUENCY TRANSMISSION (COAXIAL, AIR DIELECTRIC), GENERAL SPECIFICATION FOR |
| NASA KSC SPEC E 0029 : 1972 | COMPOUND, POTTING AND MOLDING ELASTOMERIC, SPECIFICATION FOR |
| NASA KSC E 165 : 2009 | ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR |
| SAE AMS 2422 : 2014 | PLATING, GOLD |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| NASA KSC STD G 0003 : 1988 | QUALIFICATION OF LAUNCH SUPPORT AND FACILITY COMPONENTS, STANDARD FOR |
| NEMA HP 4 : 2012 | ELECTRICAL AND ELECTRONIC FLUORINATED ETHYLENE PROPYLENE (FEP) INSULATED HIGH-TEMPERATURE HOOK-UP WIRE, TYPES KT (250 V), K (600 V) AND KK (1,000 V) |
| MIL-STD-130 Revision N:2007 | IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY |
| NASA KSC SPEC E 0031 : 2008 | CABLES, ELECTRICAL, SPECIFICATION FOR |
| MIL-PRF-39012 Revision F:2014 | CONNECTORS, COAXIAL, RADIO FREQUENCY, GENERAL SPECIFICATION FOR |
| MS14003 Revision J:2011 | SWITCH, TOGGLE, POSITIVE BREAK, ENVIRONMENTALLY SEALED, SOLDER LUG, FOUR POLE, .469 MOUNTING BUSHING, 25 AMPERES |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| MS35335 Revision G:2004 | WASHER, LOCK, FLAT EXTERNAL TOOTH (IN./MM) |
| NASA KSC STD E 0006 : 1993 | INSTRUMENTATION AND COMMUNICATIONS CABLE APPLICATIONS, STANDARD FOR |
| MIL-PRF-19500 Revision P:2010 | SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
| MIL C 17 : G | CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
| W-F-1814 Revision D:2013 | FUSES, CARTRIDGE, HIGH-INTERRUPTING CAPACITY |
| NASA KSC NE 9187 : 2008 | SENSORS, TRANSDUCERS AND SIGNAL CONDUCTING SYSTEMS SELECTION PROCESS |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| NASA KSC STD E 0009 : 1993 | CABLE NUMBERING, OUTSIDE PLANT COMMUNICATION SYSTEM, STANDARD FOR |
| NASM21046:2000 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 800 DEGREES F, 125 KSI FTU |
| NASA GB 8719.13 : 0 | NASA SOFTWARE SAFETY GUIDEBOOK |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| NASM21245:2013 | NUT, SELF-LOCKING, HEXAGON, THIN, 450 DEGREES F, 80 KSI FTU |
| IPC HDBK 001 : E | HANDBOOK AND GUIDE TO SUPPLEMENT J-STD-001 |
| NASM21042:1998 | NUT, SELF-LOCKING, 450 DEGREES F, REDUCED HEXAGON, REDUCED HEIGHT, RING BASE, NON-CORROSION RESISTANT STEEL |
| MIL-PRF-49291 Revision D:2013 | FIBER, OPTICAL, (METRIC) GENERAL SPECIFICATION FOR |
| MIL-STD-464 Revision C:2010 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS REQUIREMENTS FOR SYSTEMS |
| GEIA STD 0005-2 : 2012 | MITIGATING THE EFFECTS OF TIN WHISKERS IN AEROSPACE AND HIGH PERFORMANCE ELECTRONIC SYSTEMS |
| NASM 21047:2001 | NUT, SELF-LOCKING, PLATE, TWO-LUG, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEGREES F |
| MIL-PRF-27 Revision G:2014 | TRANSFORMERS AND INDUCTORS (AUDIO, POWER, AND HIGH-POWER PULSE), GENERAL SPECIFICATION FOR |
| IPC 2221B:2012 | GENERIC STANDARD ON PRINTED BOARD DESIGN |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| NASM 256 : 2004 | NUT, SELF-LOCKING, PLATE, RIGHT ANGLE, 250 DEGREES F |
| NASA KSC STD E 0002 : 2009 | HAZARDPROOFING OF ELECTRICALLY ENERGIZED EQUIPMENT, STANDARD FOR |
| NASA KSC STD E 0012 : 2013 | FACILITY GROUNDING AND LIGHTNING PROTECTION, STANDARD FOR |
| NASA STD 8719.13B : 2004 | **DUPLICATE RECORD** |
| SAE AS50861A | Wire, Electric, Polyvinyl Chloride Insulated, Copper or Copper Alloy |
| MIL C 22931 : B | CABLE, RADIO FREQUENCY, SEMIRIGID, COAXIAL, SEMI-AIR-DIELECTRIC, GENERAL SPECIFICATION FOR |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| NASM 21045:2004 | NUT, SELF-LOCKING, HEXAGON, REGULAR HEIGHT, 450 DEGREES F, 125 KSIFTU |
| MIL L 3661/5 : B | LAMPHOLDERS, INDICATOR LIGHTS, INDICATOR-LIGHT HOUSINGS, AND INDICATOR-LIGHT LENSES, DUSTTIGHT HOUSING STYLE LH73 |
| NASA KSC GP 435 VOL 1 : 2014 | ENGINEERING DRAWING PRACTICES - VOLUME 1: AEROSPACE AND GROUND SUPPORT EQUIPMENT |
| NASA KSC SPEC E 0002 : 2010 | MODULAR ELECTRICAL ENCLOSURES, RACKS, CONSOLES, AND ACCESSORIES, SPECIFICATION FOR |
| NASM21050:2015 | NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEGREES CSK, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEGREES & 800 DEGREES F |
| NASA KSC STD E 0015 : 1992 | MARKING OF GROUND SUPPORT EQUIPMENT, STANDARD FOR |
| NASM 35207 : 2004 | SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CARBON STEEL, CADMIUM PLATED, UNF-2A (IN./MM) |
| MIL-PRF-22885 Revision J:2016 | Switches, Push Button, Illuminated, General Specification for |
| NASM 35333 : 2003 | WASHER, LOCK, FLAT, INTERNAL TOOTH |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| NASA KSC STD E 0010 : 1994 | SOLDERING OF ELECTRICAL CONNECTIONS (HAND OR MACHINE), STANDARD FOR |
| IPC 2222 : A | SECTIONAL DESIGN STANDARD FOR RIGID ORGANIC PRINTED BOARDS |
| NASA STD 5005 : 2013 | STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT |
| MIL C 28876 : D | CONNECTORS, FIBER OPTIC, CIRCULAR, PLUG AND RECEPTACLE STYLE, MULTIPLE REMOVABLE TERMINI, GENERAL SPECIFICATION FOR |
| MIL L 15098 : D | LAMP, GLOW |
| NASA MSFC STD 156 : 1962 | RIVETING, FABRICATING AND INSPECTION, STANDARD FOR |
| NASM21048:2015 | NUT, SELF-LOCKING, PLATE, TWO LUG, LOW HEIGHT, CRES, 125 KSI FTU, 450 DEGREES F AND 800 DEGREES F |
| NASA SPEC 5004 : 0 | WELDING OF AEROSPACE GROUND SUPPORT EQUIPMENT AND RELATED NONCONVENTIONAL FACILITIES |
| AIAA R 100 : A 2001 | RECOMMENDED PRACTICE FOR PARTS MANAGEMENT |
| NASM35338:2013 | WASHER, LOCK-SPRING, HELICAL, REGULAR (MEDIUM) SERIES |
| NASM21049:1999 | NUT, SELF-LOCKING, PLATE, TWO LUG, 100 DEGREES CSK, LOW HEIGHT, STEEL, 125 KSI FTU, 450 DEGREES F |
| NASA KSC STD 132 : 2008 | POTTING AND MOLDING ELECTRICAL CABLE ASSEMBLY TERMINATIONS, STANDARD FOR |
| MIL-PRF-8805 Revision G:2016 | SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR |
| FED-STD-595 Revision C:2008 | COLORS USED IN GOVERNMENT PROCUREMENT |
| NASA STD 8739.8 : 2004 | SOFTWARE ASSURANCE STANDARD |
| MIL C 83526 : B | CONNECTOR, FIBER OPTIC, CIRCULAR, ENVIRONMENTAL RESISTANT, HERMAPHRODITIC, GENERAL SPECIFICATION FOR |
| NEMA HP 3 : 2012 | INSULATED HIGH TEMPERATURE HOOK-UP WIRE; TYPES ET (250 VOLTS), E (600 VOLTS), AND EE (1000 VOLTS) |
| A-A-59551 Revision A:2009 | WIRE, ELECTRICAL, COPPER (UNINSULATED) |
| NASA KSC STD 164 : 1992 | ENVIRONMENTAL TEST METHODS FOR GROUND SUPPORT EQUIPMENT, STANDARD FOR |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.