MIL-H-5440 Revision H:1993
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HYDRAULIC SYSTEMS, AIRCRAFT, TYPES 1 AND 11 DESIGN AND INSTALLATION REQUIREMENTS FOR
Available format(s)
PDF
Superseded date
01-04-1998
Superseded by
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.Gives requirements for types I and II hydraulic systems as follows; -54deg to +71degC (-65deg to +160degF), and -54deg to +135degC (-65deg to +275degF) temperature range.
| Committee |
FSC 1650
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Superseded
|
| SupersededBy |
| DEFSTAN 00-970(PT1)SEC6/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT1)SEC6/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
| MIL-I-83294 Base Document:1971 | INSTALLATION REQUIREMENT, AIRCRAFT PROPULSION SYSTEMS, GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT1)SEC6/15(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL P 5516 : C | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, 160 DEGREES F |
| DEFSTAN 00-970(PT1)SEC6/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL C 25427 : A | COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT |
| MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL V 81940 : B | VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS |
| MIL F 8815 : D | FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT1)SEC6/14(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT7)SEC7/1(2006) : 2006 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| DEFSTAN 00-970(PT1)SEC6/16(2016) : 2016 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DEFSTAN 00-970(PT1)SEC6/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL F 83861 : B | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE, TYPE 1I, SYSTEMS GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT7)SEC2/SUPP6/6(2015) : 2015 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 6: EQUIPMENT (SUBPART F) |
| MIL-C-8603 Revision B:1984 | CLAMPS, LOOP TYPE, AND STRAPS, SUPPORT |
| DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL-H-8775 Revision D:1976 | HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR |
| DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL V 5523 : D | VALVE, RELIEF, HYDRAULIC PRESSURE |
| DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
| MIL F 9490 : D | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL F 5508 : B | FUSE, AIRCRAFT AUTOMATIC QUANTITY MEASURING HYDRAULIC |
| DEFSTAN 00-970(PT1)SEC6/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| MIL-H-8891 Revision A:1978 | HYDRAULIC SYSTEMS, MANNED FLIGHT VEHICLES TYPE 111 DESIGN, INSTALLATION AND DATA REQUIREMENTS FOR, GENERAL SPECIFICATION FOR |
| MIL-V-19067 Revision A:1957 | VALVE, CHECK, CONTROLLABLE, HYDRAULIC, AIRCRAFT TYPE 11 SYSTEMS |
| DEFSTAN 00-970(PT7)SEC2/SUPP6/5(2015) : INTERIM | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SUPPLEMENT 6: EQUIPMENT (SUBPART F) |
| MIL-A-19736 Revision A:1960 | AIR REFUELLING SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-R-8931 Revision A:1994 | RESERVOIRS, AIRCRAFT AND MISSILE, HYDRAULIC SEPARATED TYPE |
| MIL-P-5994 Revision D:1972 | PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR |
| MIL V 6164 : E | VALVE, AIRCRAFT, AIR HIGH PRESSURE |
| MIL-T-5522 Revision D:1975 | TEST REQUIREMENTS AND METHODS FOR AIRCRAFT HYDRAULIC AND EMERGENCY PNEUMATIC SYSTEMS |
| MIL-S-8512 Revision D:1974 | SUPPORT EQUIPMENT AERONAUTICAL, SPECIAL, GENERAL SPECIFICATION FOR THE DESIGN OF |
| MIL-T-26017 Revision C:1972 | TEST STAND, HYDRAULIC SYSTEM COMPONENTS, TYPE MK-3A (STAND, TEST, AIRCRAFT HYDRAULIC SYSTEM, ELECTRIC MOTOR DRIVEN, TYPE MK-3A) |
| MIL F 83860 : C | FILTER ELEMENTS, NONCLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE, TYPE II, SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL V 19068 : A | VALVE, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 11 SYSTEMS |
| MIL B 8075 : D | BRAKE CONTROL SYSTEMS, ANTI SKID, AIRCRAFT WHEELS, INSTRUCTIONS FOR PREPARATION OF |
| DEFSTAN 00-970(PT1)SEC6/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6 - EQUIPMENT |
| SAE AIR 4713 : 2013 | AEROSPACE - CHLORINATED SOLVENT CONTAMINATION OF MIL-H-5606/MIL-H-83282 VEHICLE HYDRAULIC SYSTEMS |
| SAE AS 5994A:2000(S2013) | PUMP UNITS, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY |
| SAE AIR 4922A : 2015 | PRIMARY FLIGHT CONTROL HYDRAULIC ACTUATION SYSTEM INTERFACE DEFINITION |
| SAEITC TS103-2 | TS103 Recommendations for Design Considerations for Aircraft Hydraulic Systems |
| MIL-V-5527 Revision A:1951 | VALVE, AIRCRAFT, HYDRAULIC THERMAL EXPANSION RELIEF |
| MIL-S-8812 Revision D:1975 | STEERING SYSTEM, AIRCRAFT GENERAL REQUIREMENTS FOR |
| DEFSTAN 00-970(PT7)SEC7/3(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| DEFSTAN 00-970(PT1)SEC6/6(2010) : 2010 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| SAE AS 4251 : 2013 | COUPLING ASSEMBLIES, NON-LOCKING PROBE STYLE, SELF-ALIGNING, SELF-SEALING DISCONNECTS |
| MIL-T-7081 Revision D:1965 | TUBE, ALUMINUM ALLOY, SEAMLESS, ROUND, DRAWN, 6061, AIRCRAFT HYDRAULIC QUALITY |
| MIL-I-8673 Base Document:1955 | INSTALLATION AND TEST OF AIRCRAFT FLEXIBLE WEAPONS SYSTEMS |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR |
| MIL-F-5509 Revision D:1978 | FITTING, FLARED TUBE, FLUID CONNECTION |
| MIL I 18373 : B | INSTRUMENT AND NAVIGATION EQUIPMENT, AIRCRAFT, INSTALLATION OF |
| MIL PRF 46821 : C | LOADER-TRANSPORTER, GUIDED MISSILE - XM501E3 (IMPROVED HAWK) |
| MIL-R-5520 Revision C:1964 | RESERVOIRS, AIRCRAFT, HYDRAULIC, NON-SEPARATED TYPE |
| MIL-P-5238 Revision C:1974 | PUMP, CENTRIFUGAL, FUEL BOOSTER, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-P-87175 Base Document:1982 | PACKING, PREFORMED, PETROLEUM, HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLUOROELASTOMER |
| DEFSTAN 00-970(PT7)SEC7/2(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 7: ROTORCRAFT - SECTION 7: INSTALLATIONS |
| SAE AS 6026 : 2013 | CONTROL UNIT, PRESSURE GENERATING, MANUALLY OPERATED, AIRCRAFT HYDRAULIC BRAKE SYSTEM |
| MIL-V-19069 Revision B:1986 | Valve, Check, Hydraulic, Aircraft, Type II Systems |
| SAE AS 1896 : 2013 | COUPLING ASSEMBLY, SELF-SEALING, ONE SIDE ONLY, HYDRAULIC |
| DEFSTAN 00-970(PT1)SEC6/5(2007) : 2007 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: COMBAT AIRCRAFT - SECTION 6: EQUIPMENT |
| MIL-W-5013 Revision L:1991 | WHEEL AND BRAKE ASSEMBLIES - AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-46821 Revision D:1998 | LOADER-TRANSPORTER, GUIDED MISSILE: XM501E3 (IMPROVED HAWK) |
| SAE ARP 1897 : 2013 | CLAMP SELECTION AND INSTALLATION GUIDE |
| SAE AS 25427 : 2015 | COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT |
| MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-P-83461 Revision B:1980 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C) |
| MIL A 5498 : D | ACCUMULATORS, HYDRAULIC, CYLINDRICAL 3000 PSI, AIRCRAFT |
| DIN 9370:1985-04 | AEROSPACE; TUBES; CLASSIFICATION, PRESSURE TERMS, CALCULATION AND DESIGN CRITERIA |
| DEFSTAN 00-970(PT1)SEC6/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 1: FIXED WING - SECTION 6: EQUIPMENT |
| DIN 65178-1:1985-12 | AEROSPACE; CONFIGURATION AND INSTALLATION OF FLUID PIPELINES; SURVEY AND DEFINITIONS |
| MIL R 25532 : A | ROCKET MOTOR, AERONAUTICAL, QUALIFICATION TEST FOR |
| MIL-C-18244 Revision A:1962 | CONTROL AND STABILIZATION SYSTEMS, AUTOMATIC, PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
| SAE ARP 4943 : 2008 | GROUND SUPPORT EQUIPMENT HYDRAULIC SYSTEMS, DESIGN AND INSTALLATION, RECOMMENDED PRACTICES FOR |
| SAE AIR 4543 : 2017 | AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED |
| SAE AS 838 : 2013 | AIRCRAFT HYDRAULIC STARTER/PUMPS |
| MIL-T-5522 Revision D:1975 | TEST REQUIREMENTS AND METHODS FOR AIRCRAFT HYDRAULIC AND EMERGENCY PNEUMATIC SYSTEMS |
| MIL-R-83248 Revision C:1994 | RUBBER, FLUOROCARBON ELASTOMER, HIGH TEMPERATURE, FLUID, AND COMPRESSION SET RESISTANT |
| SAE AS 4396 : 2013 | FITTING END, BULKHEAD, FLARED TUBE CONNECTION, DESIGN STANDARD |
| MIL F 83296 : 0 | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, HIGH PRESSURE (3,000 PSI HYDRAULIC AND PNEUMATIC) |
| MIL V 81940 : B | VALVE, SAMPLING AND BLEED, HYDRAULIC, TYPE LI SYSTEMS |
| SAE ARP 603 : 1985 | IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES |
| MIL H 46170 : B | HYDRAULIC FLUID, RUST INHIBITED, FIRE-RESISTANT, SYNTHETIC HYDROCARBON BASE |
| MIL-F-8785 Revision C:1980 | FLYING QUALITIES OF PILOTED AIRPLANES |
| MIL F 81836 : A SUPP 1 | FILTER AND DISPOSABLE ELEMENT, FLUID PRESSURE, HYDRAULIC, 3 MICRON ABSOLUTE |
| SAE AS 1975 : 2016 | Hose Assembly, Polytetrafluoroethylene, Para-Aramid Reinforced, 3000/4000 psi, 275 °F, Standard Duty, Hydraulic, Aircraft Systems |
| MIL-STD-1844 Base Document:1984 | GAS CHROMATOGRAPHY METHOD FOR DETERMINATION OF TRACE CHLORINATED SOLVENTS IN HYDRAULIC FLUID |
| MIL H 83298 : A | HOSE, TETRAFLUOROETHYLENE, HIGH TEMPERATURE, HIGH PRESSURE (3000 PSI) HYDRAULIC AND PNEUMATIC |
| SAE ARP 4146D : 2012 | COILED TUBING - TITANIUM ALLOY, HYDRAULIC APPLICATIONS, AEROSPACE |
| MIL-T-6845 Revision D:1985 | TUBING, STEEL, CORROSION-RESISTANT (304) AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION |
| SAE ARP 4553 : 2008 | AEROSPACE - ACCUMULATOR, HYDRAULIC, SELF-DISPLACING |
| SAE AS 4201 : 1998 | PORT - RING LOCKED FLUID CONNECTION TYPE, 8000 PSI DESIGN STANDARD |
| MIL H 27267 : B | HOSE TETRAFLUOROETHYLENE, HIGH TEMPERATURE, MEDIUM PRESSURE |
| MIL-C-85449-1 Revision B:1987 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, NBR RUBBER, 321 CRES, 275 DEG. F, FUEL RESISTANT, GENERAL PURPOSE |
| MIL J 5513 : C | JOINT, HYDRAULIC SWIVEL |
| MIL C 25427 : A | COUPLING ASSEMBLY, HYDRAULIC, SELF-SEALING, QUICK DISCONNECT |
| MIL-M-7997 Revision C:1981 | Motor, Aircraft Hydraulic, Constant Displacement General Specification for |
| MIL-R-83485 Base Document:1976 | RUBBER, FLUOROCARBON ELASTOMER, IMPROVED PERFORMANCE AT LOW TEMPERATURES |
| SAE AS 1300 : 2014 | PORT - RING LOCKED FLUID CONNECTION TYPE, STANDARD DIMENSIONS FOR |
| MIL V 19068 : A | VALVE, SHUTTLE, HYDRAULIC, AIRCRAFT, TYPE 11 SYSTEMS |
| MIL-H-8891 Revision A:1978 | HYDRAULIC SYSTEMS, MANNED FLIGHT VEHICLES TYPE 111 DESIGN, INSTALLATION AND DATA REQUIREMENTS FOR, GENERAL SPECIFICATION FOR |
| MIL H 25579 : E | HOSE ASSEMBLY, TETRAFLUOROETHYLENE, HIGH TEMPERATURE MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MIL-C-85449-3 Revision B:1987 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHIONED, SILICONE FABRIC, REINFORCED 321 CRES, 500 DEG. F, GENERAL PURPOSE |
| MIL-V-5525 Revision C:1959 | Valves, Aircraft Power Brake |
| MIL-B-8584 Revision C:1970 | BRAKE SYSTEMS, WHEEL, AIRCRAFT, DESIGN OF |
| MS14169 Revision C:1980 | CIRCULAR SPLINE AND ADAPTER DETAILS ENGINE DRIVEN ACCESSORIES |
| SAE AMS 5561 : 2012 | STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC |
| MS27595 Revision E:2006 | RETAINER, PACKING BACKUP, CONTINUOUS RING, POLYTETRAFLUOROETHYLENE |
| MIL S 9395 : F | SWITCHES, PRESSURE, [ABSOLUTE, GAGE AND DIFFERENTIAL] GENERAL SPECIFICATION FOR |
| MIL-V-5527 Revision A:1951 | VALVE, AIRCRAFT, HYDRAULIC THERMAL EXPANSION RELIEF |
| MIL-P-83461-2 Base Document:1991 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE AT 275 DEGREE F FOR USE IN BOSS FITTINGS, SIZES AND TOLERANCES |
| MIL-STD-2069 Base Document:1961 | REQUIREMENTS FOR AIRCRAFT NONNUCLEAR SURVIVABILITY PROGRAM |
| MIL F 27272 : B | FITTING, TETRAFLUOROETHYLENE HOSE, HIGH TEMPERATURE, MEDIUM PRESSURE, GENERAL REQUIREMENTS FOR |
| MS33656 Revision J:1987 | FITTING END, STANDARD DIMENSIONS FOR FLARED TUBE CONNECTION AND GASKET SEAL |
| MIL-F-8815-6 Revision B:1976 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE 3000 PSI 5 MICRON ABSOLUTE MINUS 65 DEGREES TO PLUS 275 DEGREES F |
| MIL-P-5994 Revision D:1972 | PUMP, HYDRAULIC, ELECTRIC MOTOR DRIVEN, VARIABLE DELIVERY, GENERAL SPECIFICATION FOR |
| MIL-F-85720 Base Document:1985 | FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR |
| MIL F 9490 : D | FLIGHT CONTROL SYSTEMS - DESIGN, INSTALLATION AND TEST OF PILOTED AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-G-5514 Revision G:1993 | GLAND DESIGN, PACKINGS, HYDRAULIC GENERAL REQUIREMENTS FOR |
| MIL-R-8791 Revision D:1982 | RETAINER, PACKING, HYDRAULIC, AND PNEUMATIC, TETRAFLUOROETHYLENE RESIN |
| SAE ARP 994 : 2016 | DESIGN OF TUBING INSTALLATIONS FOR AEROSPACE HYDRAULIC SYSTEMS |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| MIL V 25675 : B | VALVE, CHECK, MINIATURE, HYDRAULIC, AIRCRAFT AND MISSILE |
| MS33583 Revision C:1993 | TUBING END, DOUBLE FLARE, STANDARD DIMENSIONS FOR |
| SAE AMS 4945 : 2014 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED |
| SAE ARP 1192 : B1987 (R1991) | PROCEDURE FOR CALIBRATION AND VERIFICATION OF LIQUIDBORNE PARTICLE COUNTER - AN ABSOLUTE STANDARD |
| MIL-H-8775 Revision D:1976 | HYDRAULIC SYSTEM COMPONENTS, AIRCRAFT AND MISSILES GENERAL SPECIFICATION FOR |
| MIL-STD-2089 Base Document:1981 | AIRCRAFT NONNUCLEAR SURVIVABILITY TERMS |
| MS33584 Revision C:1990 | TUBING END, STANDARD DIMENSIONS FOR FLARED |
| SAE AIR 4057 : 2012 | SECONDARY FILTERS FOR FLUID SYSTEM RELIABILITY |
| MIL-STD-1472 Revision G:2012 | HUMAN ENGINEERING |
| MIL C 85052/1 : B | CLAMP, LOOP TUBE 17-7 PH CRES, 275 DEG., F, FUEL AND PETROLEUM BASED HYDRAULIC FLUID RESISTANT |
| MIL F 8815 : D | FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR |
| MIL-V-19067 Revision A:1957 | VALVE, CHECK, CONTROLLABLE, HYDRAULIC, AIRCRAFT TYPE 11 SYSTEMS |
| SAE AS 1339 : 2012 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, LIGHTWEIGHT, HYDRAULIC AND PNEUMATIC |
| SAE AS 1290 : 2011 | GRAPHIC SYMBOLS FOR AIRCRAFT HYDRAULIC AND PNEUMATIC SYSTEMS |
| SAE ARP584C | COILED TUBING - CORROSION RESISTANT STEEL, HYDRAULIC APPLICATIONS, AEROSPACE |
| MIL F 5508 : B | FUSE, AIRCRAFT AUTOMATIC QUANTITY MEASURING HYDRAULIC |
| SAE AS 4059F : 2013 | AEROSPACE FLUID POWER - CONTAMINATION CLASSIFICATION FOR HYDRAULIC FLUIDS |
| MIL-P-19692 Revision E:1994 | PUMPS, HYDRAULIC, VARIABLE FLOW, GENERAL SPECIFICATION FOR |
| MS33611 Revision A:1983 | TUBE BEND RADII |
| SAE AS 4251 : 2013 | COUPLING ASSEMBLIES, NON-LOCKING PROBE STYLE, SELF-ALIGNING, SELF-SEALING DISCONNECTS |
| MIL G 8348 : H | GAGE, ASSEMBLIES, AIR PRESSURE, DIAL INDICATING CHUCK TYPE SELF CONTAINED |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| MS14184 Revision A:1980 | NON-METALLIC SHAFT COUPLING DETAILS ENGINE DRIVEN ACCESSORIES |
| MIL C 85052/3 : B | CLAMP, LOOP, TUBE 17-7 PH CRES, 500 DEG., F |
| SAE ARP598D | AEROSPACE MICROSCOPIC SIZING AND COUNTING OF PARTICULATE CONTAMINATION FOR FLUID POWER SYSTEMS |
| MIL-R-8931 Revision A:1994 | RESERVOIRS, AIRCRAFT AND MISSILE, HYDRAULIC SEPARATED TYPE |
| SAE ARP 1383 : 2013 | AEROSPACE - IMPULSE TESTING OF HYDRAULIC COMPONENTS |
| MIL C 85052 : A | CLAMP LOOP, CUSHION, GENERAL SPECIFICATION FOR |
| MIL-P-83461 Revision B:1980 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEGREES F (135 DEGREES C) |
| MIL-V-19069 Revision B:1986 | Valve, Check, Hydraulic, Aircraft, Type II Systems |
| FED-STD-791 Revision D:2007 | TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS |
| MIL F 18372 : 0 | FLIGHT CONTROL SYSTEMS, DESIGN, INSTALLATION AND TEST OF, AIRCRAFT (GENERAL SPECIFICATION FOR) |
| MIL-C-85449 Base Document:1981 | CLAMP ASSEMBLY, SADDLE TYPE, CUSHION, GENERAL SPECIFICATION FOR |
| SAE AS 604 : 2012 | HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, METALLIC REINFORCED, 3000 PSI, 400 DEGREES F, HEAVYWEIGHT, HYDRAULIC |
| MIL-STD-1247 Revision D:2009 | MARKINGS, FUNCTIONS AND HAZARDS DESIGNATIONS OF HOSE, PIPE, AND TUBE LINES FOR AIRCRAFT MISSILE, AND SPACE SYSTEMS |
| MIL-V-29592 Base Document:1993 | VALVE, AIR VENT, AUTOMATIC, HYDRAULIC, LOW PRESSURE TYPE II SYSTEMS, GENERAL SPECIFICATION FOR |
| MIL-B-5087 Revision B:1964 | BONDING, ELECTRICAL AND LIGHTING PROTECTION, FOR AEROSPACE SYSTEMS |
| MIL A 5503 : E | ACTUATOR, AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
| MIL-W-5088 Revision L:1991 | Wiring, Aerospace Vehicle (Future Design Should Refer to SAE-AS50881) |
| MIL H 85800 : 0 | HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE, ARAMID FIBER REINFORCED, 5000 & 8000 PSI, GENERAL SPECIFICATION FOR |
| MIL-T-7081 Revision D:1965 | TUBE, ALUMINUM ALLOY, SEAMLESS, ROUND, DRAWN, 6061, AIRCRAFT HYDRAULIC QUALITY |
| MIL-F-85421 Revision B:1986 | FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAM, 3000/4000 PSI - GENERAL SPECIFICATION FOR |
| MS21344 Revision A:2016 | FITTING INSTALLATION OF FLARED TUBE STRAIGHT THREADED CONNECTORS DESIGN STANDARD FOR |
| MIL-F-7179 Revision G:1993 | FINISHES, COATINGS, AND SEALANTS FOR THE PROTECTION OF AEROSPACE WEAPONS SYSTEM |
| MIL-P-83461-1 Revision B:1989 | PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT IMPROVED PERFORMANCE OF 275 DEG. F (135 DEG. C) SIZES AND TOLERANCES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.