MIL-DTL-1222 Revision J:2000
Current
Current
The latest, up-to-date edition.
STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR
Available format(s)
PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Covers standard studs, hex cap screws, and heavy hex bolts in nominal standard diameters of 1/2 inch to 4 inches, nuts in nominal standard diameters of 1/2 inch to 3 inches, and socket head cap screws in nominal standard diameters of 1/2 inch to 1 1/2 inches for submarine safety and other applications where a high degree of reliability is required.
| Committee |
FSC 53GP
|
| DevelopmentNote |
Supersedes MIL S 1222 (H) (05/2001)
|
| DocumentType |
Standard
|
| Pages |
51
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
| MIL-DTL-24509 Revision B:2017 | Valves, Flanged, Balland Plugfor Sewageand Seawater Service |
| MIL-DTL-24749 Revision B:2014 | GROUNDING STRAPS AND BOSSES, ELECTROMAGNETIC |
| MIL-DTL-24696 Revision C:2008 | GASKET, SHEET, NON-ASBESTOS |
| MIL-DTL-18030 Revision F:2018 | Valves, Control, Air-Diaphragm-Operated (Complete with Pneumatic Instrumentation) |
| MIL-DTL-17060 Revision G:2009 | MOTORS, ALTERNATING CURRENT, INTEGRAL-HORSEPOWER, SHIPBOARD USE |
| MIL-DTL-16356 Revision E:2013 | GAUGES, DIRECT READING, OBLONG GLASS |
| MIL-DTL-24151 Revision B:2016 | DOORS, ROLLER CURTAIN AND HINGED SLAT, AND ASSOCIATED OPERATING EQUIPMENT |
| MIL-DTL-32483 Base Document:2013 | Switchgear, Power, Hard-Mounted, Medium Voltage, Naval Shipboard |
| MIL-DTL-3124 Revision E:2014 | GENERATOR, ALTERNATING CURRENT, 60-HERTZ (NAVAL SHIPBOARD USE) |
| MIL B 18 : F | BATTERIES, NON-RECHARGEABLE, DRY |
| MIL-DTL-917 Revision F:2014 | ELECTRIC POWER EQUIPMENT, BASIC REQUIREMENTS FOR |
| MIL-DTL-32525 Base Document:2016 | MAGAZINE, PORTABLE (SHIPBOARD) |
| MIL-DTL-16036 Revision M:2013 | SWITCHGEAR, POWER, LOW VOLTAGE, NAVAL SHIPBOARD |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-24299 Revision B:2017 | HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD |
| MIL-DTL-16556 Revision F:2017 | Valve, Solenoid, Three-Way Bypass ( Naval Shipboard Use ) |
| MIL-DTL-24223 Revision D:2014 | LOUDSPEAKER, PERMANENT MAGNET, SHIPBOARD ANNOUNCING SYSTEMS |
| MIL-PRF-32407 Revision A:2016 | MOUNTS, RESILIENT (SURFACE SHIP APPLICATION) |
| MIL-DTL-32408 Base Document:2012 | INTEGRAL MOTOR PUMP (IMP) |
| MIL-PRF-907 Revision F:2004 | ANTISEIZE THREAD COMPOUND, HIGH TEMPERATURE |
| MIL-DTL-16034 Revision B:2008 | METERS, ELECTRICAL-INDICATING (SWITCHBOARD AND PORTABLE TYPES), GENERAL SPECIFICATION FOR |
| MIL-STD-1310 Revision H:2009 | SHIPBOARD BONDING, GROUNDING, AND OTHER TECHNIQUES FOR ELECTROMAGNETIC COMPATIBILITY, ELECTROMAGNETIC PULSE (EMP) MITIGATION, AND SAFETY |
| MIL-DTL-18110 Revision G:2018 | VALVES, GATE TYPE, STEEL SIZES 2[1/2] INCHES TO 16 INCHES |
| MIL-PRF-32187 Revision A:2017 | Gasket, Hybrid, Flat and Raised Face Flange, Fire Resistant, Shipboard Use |
| MIL-B-49030 Revision A:2010 | BATTERIES, DRY (ALKALINE) |
| MIL-HDBK-454 Revision B:2007 | GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
| MIL-R-19309 Revision D:2003 | RELAY, SENSITIVE (FOR TORPEDO MARK 37 MOD 2) |
| MIL-DTL-901 Revision E:2017 | Shock Tests, H.I. (High-Impact) Shipboard Machinery, Equipment, and Systems, Requirements for |
| MIL-DTL-17557 Revision F:2013 | Coolers, Fluid, Industrial, Naval Shipboard (Sample Water Coolers) |
| MIL-DTL-17840 Revision D:2018 | Pump, Centrifugal, Close-Coupled, Navy Standard (for Surface Ships Application) |
| SAE AMS 3050 : 2017 | PERFORMANCE SPECIFICATION ANTI-SEIZE THREAD COMPOUND, HIGH TEMPERATURE |
| MIL-DTL-17849 Revision F:2018 | Strainers, Sediment, Pipeline, Duplex (with and without Magnet) |
| MIL-DTL-23928 Revision G:2014 | PANELS, ELECTRICAL, POWER DISTRIBUTION AND MANUAL TRANSFER, CIRCUIT BREAKER TYPE |
| MIL-STD-2193 Revision C:2012 | Ship Hydraulic System Components |
| MIL-STD-202-207 Base Document:2015 | METHOD 207, HIGH IMPACT SHOCK |
| MIL-STD-777 Revision F:2012 | SCHEDULE OF PIPING, VALVES, FITTINGS, AND ASSOCIATED PIPING COMPONENTS FOR NAVAL SURFACE SHIPS |
| ASME B18.2.1 : 2012 | SQUARE, HEX, HEAVY HEX, AND ASKEW HEAD BOLTS AND HEX, HEAVY HEX, HEX FLANGE, LOBED HEAD, AND LAG SCREWS (INCH SERIES) |
| MIL-F-8961 Revision A:1992 | Fastener Element, Self-Locking, Externally Threaded, 450 Degrees Fahrenheit and 1,200 Degrees Fahrenheit |
| DOD-PRF-24648 Base Document:1985 | PRIMER COATING, ZINC DUST PIGMENTED FOR EXTERIOR STEEL SURFACES (METRIC) |
| ASME B1.12 : 1987 | CLASS 5 INTERFERENCE-FIT THREAD |
| QQ-N-286 Revision G:2000 | NICKEL-COPPER ALUMINUM ALLOY, WROUGHT (UNS N05500) |
| ASTM B 348 : 2013 : REDLINE | Standard Specification for Titanium and Titanium Alloy Bars and Billets |
| SAE AMS 2488 : 2000 | ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER |
| ASTM F 593 : 2017 : REDLINE | Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs |
| SAE J 429 : 2014 | MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS |
| MIL-STD-1684 Revision D:1997 | CONTROL OF HEAT TREATMENT |
| MIL-STD-792 Revision F:2006 | IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS |
| ASTM A 380 : 2006 | Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems |
| MIL-DTL-25027 Revision H:1997 | NUT, SELF-LOCKING, 250 DEG F, 450 DEG F, AND 850 DEG F |
| NASM1312:2012 | FASTENER TEST METHODS METHOD 11 TENSION FATIGUE |
| SAE AMS 2750 : 2012 | PYROMETRY |
| MIL-DTL-83488 Revision D:1999 | COATING, ALUMINUM, HIGH PURITY |
| NAVSEA T9074 AS GIB 010/271 : 0 | REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
| MIL-PRF-81329 Revision E:2015 | LUBRICANT, SOLID FILM, EXTREME ENVIRONMENT, NATO CODE NUMBER S-1737 |
| SAE AMS2631D | ULTRASONIC INSPECTION, TITANIUM AND TITANIUM ALLOY BAR, BILLET AND PLATE |
| SAE J121_201301 | DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS |
| SAE J123_201204 | SURFACE DISCONTINUITIES ON BOLTS, SCREWS, AND STUDS IN FATIGUE APPLICATIONS |
| ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
| ASTM A 449 : 2014 : REDLINE | Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use |
| ASME B18.2.2 : 2015 | NUTS FOR GENERAL APPLICATIONS: MACHINE SCREW NUTS, HEX, SQUARE, HEX FLANGE, AND COUPLING NUTS (INCH SERIES) |
| SAE J122_201701 | SURFACE DISCONTINUITIES ON NUTS |
| ASTM A 574 : 2017 : REDLINE | Standard Specification for Alloy Steel Socket-Head Cap Screws |
| MIL-DTL-18240 Revision F:1997 | FASTENER ELEMENT, SELF-LOCKING, THREADED FASTENER, 250 DEGREES F MAXIMUM |
| ASME B18.2.6 : 2010 | FASTENERS FOR USE IN STRUCTURAL APPLICATIONS |
| MIL L 46010 : D | LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
| SAE J 995 : 2012 | MECHANICAL AND MATERIAL REQUIREMENTS FOR STEEL NUTS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.