ISO/IEC 15457-3:2008
Current
The latest, up-to-date edition.
Identification cards — Thin flexible cards — Part 3: Test methods
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English
18-02-2008
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Thin flexible cards, the subject of this International Standard, are used to automate the controls for access to goods or services such as mass transit, highway toll systems, car parks, vouchers, stored value, etc.
For these applications, data can be written and/or read by machines using various recording techniques such as magnetic stripe, optical character recognition (OCR), bar code, etc.
ISO/IEC 15457-3:2008 specifies the test methods and procedures required to carry out measurements of the magnetic stripe and encoding characteristics of thin flexible cards.
Many of the standard methods available for checking physical properties of base materials are intended to be applied to samples cut from continuous material or large sheets. However, all test methods given herein, unless explicitly stated otherwise, apply to finished cards.
The test methods described are to be performed on separate samples. It is not intended that any individual card should pass through more than one test procedure, unless explicitly stated.
Acceptance criteria do not form part of ISO/IEC 15457-3:2008.
| Committee |
ISO/IEC JTC 1/SC 17
|
| DocumentType |
Standard
|
| Pages |
37
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO/IEC 15457-3 : 2008 | Identical |
| BS ISO/IEC 15457-3:2008 | Identical |
| CSA ISO/IEC 15457-3:09 (R2019) | Identical |
| GOST R ISO/IEC 15457-3 : 2006 | Identical |
| INCITS/ISO/IEC 15457-3 : 2002 | Identical |
| CSA ISO/IEC 15457-3 : 2009 | Identical |
| CSA ISO/IEC 15457-3 : 2009 : R2014 | Identical |
| INCITS/ISO/IEC 15457-3 : 2002 : R2007 | Identical |
| 07/30162877 DC : 0 | BS ISO/IEC 14443-1 - IDENTIFICATION CARDS - CONTACTLESS INTEGRATED CIRCUIT(S) CARDS - PROXIMITY CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| BS ISO/IEC 15457-2:2007 | Identification cards. Thin flexible cards Magnetic recording technique |
| ANSI INCITS 284 : 2011 | INFORMATION TECHNOLOGY - IDENTIFICATION CARDS - HEALTH CARE IDENTIFICATION CARDS |
| INCITS/ISO/IEC 15457-2 : 2001 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUES |
| INCITS/ISO/IEC 15457-1 : 2011 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| ISO/IEC 15457-1:2008 | Identification cards — Thin flexible cards — Part 1: Physical characteristics |
| CSA ISO/IEC 15457-1 : 2009 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| CSA ISO/IEC 15457-1 : 2009 : R2014 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 1: PHYSICAL CHARACTERISTICS |
| BS ISO/IEC 15457-1:2001 | Identification cards. Thin flexible cards Physical characteristics |
| ANSI INCITS 410 : 2015 | INFORMATION TECHNOLOGY - IDENTIFICATION CARDS - LIMITED USE (LU), PROXIMITY INTEGRATED CIRCUIT CARD (PICC) |
| 05/30127945 DC : DRAFT JAN 2005 | ISO/IEC 10373-2 - IDENTIFICATION CARDS - TEST METHODS - PART 2: CARDS WITH MAGNETIC STRIPES |
| 05/30142211 DC : DRAFT NOV 2005 | ISO/IEC 15457-2 - IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUE |
| INCITS/ISO/IEC 15457-2 : 2001 : R2007 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUES |
| ISO/IEC 15457-2:2007 | Identification cards — Thin flexible cards — Part 2: Magnetic recording technique |
| CSA ISO/IEC 15457-2 : 2008 : R2013 | IDENTIFICATION CARDS - THIN FLEXIBLE CARDS - PART 2: MAGNETIC RECORDING TECHNIQUE |
| CAN/CSA-ISO/IEC 15457-2-08 (R2018) | Identification cards - Thin flexible cards - Part 2: Magnetic recording technique (Adopted ISO/IEC 15457-2:2007, second edition, 2007-06-15) |
| IEC 60454-2:2007 | Pressure-sensitive adhesive tapes for electrical purposes - Part 2: Methods of test |
| ISO/IEC 10373-1:2006 | Identification cards Test methods Part 1: General characteristics |
| ISO 5636-3:2013 | Paper and board — Determination of air permeance (medium range) — Part 3: Bendtsen method |
| ISO 4094:2005 | Paper, board and pulps International calibration of testing apparatus Nomination and acceptance of standardizing and authorized laboratories |
| ISO 5629:1983 | Paper and board Determination of bending stiffness Resonance method |
| ISO/IEC 15457-1:2008 | Identification cards — Thin flexible cards — Part 1: Physical characteristics |
| ISO 5626:1993 | Paper Determination of folding endurance |
| ISO 2471:2008 | Paper and board — Determination of opacity (paper backing) — Diffuse reflectance method |
| ISO/IEC 7811-6:2014 | Identification cards Recording technique Part 6: Magnetic stripe High coercivity |
| IEC 60050-221:1990 | International Electrotechnical Vocabulary (IEV) - Part 221: Magnetic materials and components |
| ISO 2758:2014 | Paper Determination of bursting strength |
| ISO 187:1990 | Paper, board and pulps — Standard atmosphere for conditioning and testing and procedure for monitoring the atmosphere and conditioning of samples |
| ISO 8570:1991 | Plastics Film and sheeting - Determination of cold-crack temperature |
| ISO 4677-1:1985 | Atmospheres for conditioning and testing Determination of relative humidity Part 1: Aspirated psychrometer method |
| CR 13875:2000 | Identification card systems - Intersector thin flexible cards - Security features |
| ISO 5627:1995 | Paper and board — Determination of smoothness (Bekk method) |
| EN 25651 : 1993 | PAPER, BOARD AND PULPS - UNITS FOR EXPRESSING PROPERTIES |
| ISO 2144:2015 | Paper, board and pulps Determination of residue (ash) on ignition at 900 degrees C |
| ISO 284:2012 | Conveyor belts — Electrical conductivity — Specification and test method |
| ISO 186:2002 | Paper and board — Sampling to determine average quality |
| ISO 8226-2:1990 | Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 % |
| ISO 1924-2:2008 | Paper and board — Determination of tensile properties — Part 2: Constant rate of elongation method (20 mm/min) |
| ISO 1831:1980 | Printing specifications for optical character recognition |
| ISO 3274:1996 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Nominal characteristics of contact (stylus) instruments |
| ISO/IEC 7811-2:2014 | Identification cards Recording technique Part 2: Magnetic stripe Low coercivity |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 534:2011 | Paper and board — Determination of thickness, density and specific volume |
| ISO 554:1976 | Standard atmospheres for conditioning and/or testing — Specifications |
| CR 13909:2000 | Identification card systems - Intersector thin flexible cards - Acceptance criteria |
| ISO/IEC 15457-2:2007 | Identification cards — Thin flexible cards — Part 2: Magnetic recording technique |
| ISO 8295:1995 | Plastics Film and sheeting Determination of the coefficients of friction |
| ISO 6383-2:1983 | Plastics Film and sheeting Determination of tear resistance Part 2: Elmendorf method |
| ISO 2409:2013 | Paints and varnishes Cross-cut test |
| ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
| ISO 4287-1:1984 | Surface roughness — Terminology — Part 1: Surface and its parameters |
| ISO 4593:1993 | Plastics Film and sheeting Determination of thickness by mechanical scanning |
| ISO/IEC 10373-2:2015 | Identification cards Test methods Part 2: Cards with magnetic stripes |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.