ISO 8503-1:2012
Current
Current
The latest, up-to-date edition.
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English, Russian
Published date
22-02-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 8503-1:2012 specifies the requirements for ISO surface profile comparators, which are intended for visual and tactile comparison of steel substrates which have been blast-cleaned with either shot abrasives or grit abrasives. It also includes definitions of the terms used in the ISO 8503 series and requirements for the care of ISO surface profile comparators.
| DevelopmentNote |
Supersedes ISO/DIS 8503-1. (02/2012)
|
| DocumentType |
Standard
|
| Pages |
8
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN ISO 8503-1 : 2012 | Identical |
| NBN EN ISO 8503-1 : 2012 | Identical |
| NEN EN ISO 8503-1 : 2012 | Identical |
| NS EN ISO 8503-1 : 2012 | Identical |
| I.S. EN ISO 8503-1:2012 | Identical |
| PN EN ISO 8503-1 : 2012 | Identical |
| SN EN ISO 8503-1:2012 | Identical |
| UNI EN ISO 8503-1 : 2012 | Identical |
| UNE-EN ISO 8503-1:2012 | Identical |
| BS EN ISO 8503-1:2012 | Identical |
| EN ISO 8503-1:2012 | Identical |
| DIN EN ISO 8503-1:2013-05 | Identical |
| BS 7079-C1(1989) : 1989 AMD 8652 | Identical |
| UNE-EN ISO 12670:2016 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| I.S. EN 10329:2006 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| ISO 20340:2009 | Paints and varnishes Performance requirements for protective paint systems for offshore and related structures |
| 07/30159562 DC : 0 | BS EN ISO 13628-1 AMD1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS |
| 15/30327431 DC : 0 | BS ISO 15741 - PAINTS AND VARNISHES - FRICTION-REDUCTION COATINGS FOR THE INTERIOR OF ON- AND OFFSHORE STEEL PIPELINES FOR NON-CORROSIVE GASES |
| ISO 12944-9:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures |
| I.S. EN ISO 12944-5:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS (ISO 12944-5:2018) |
| I.S. EN ISO 2063-1:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS FOR CORROSION PROTECTION SYSTEMS (ISO 2063-1:2017) |
| BS ISO 18647:2017 | Petroleum and natural gas industries. Modular drilling rigs for offshore fixed platforms |
| 05/30128302 DC : DRAFT JAN 2005 | EN ISO 22476-1 - GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 1: ELECTRICAL CONE AND PIEZOCONE PENETRATION TESTS |
| BS 7079-C5(2003) : 2003 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE |
| DIN EN 15655:2016-07 (Draft) | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| ISO/TR 15235:2001 | Preparation of steel substrates before application of paints and related products Collected information on the effect of levels of water-soluble salt contamination |
| I.S. EN ISO 12670:2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| BS EN ISO 12944-6:2018 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Laboratory performance test methods |
| 15/30320416 DC : 0 | BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EEMUA 194 : 2012 | GUIDELINES FOR MATERIALS SELECTION AND CORROSION CONTROL FOR SUBSEA OIL AND GAS PRODUCTION EQUIPMENT |
| EN ISO 12944-9:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018) |
| I.S. EN ISO 2808:2007 | PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
| BS EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines. External two layer extruded polyethylene based coatings |
| ISO 8503-3:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure |
| BS EN ISO 2808:2007 | Paints and varnishes. Determination of film thickness |
| BS EN 14616:2004 | Thermal spraying. Recommendations for thermal spraying |
| ISO 14916:2017 | Thermal spraying — Determination of tensile adhesive strength |
| DIN EN 14879-4:2008-01 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| DIN EN 14616:2005-02 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| EN 10288:2002 | Steel tubes and fittings for onshore and offshore pipelines - External two layer extruded polyethylene based coatings |
| DIN EN 1090-2:2011-10 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 15189:2007-02 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| NACE AMPP SP21486:2023 | Dry-Docking Hull Surface Maintenance and Repair Standard Practice |
| NBR 10443 : 2008 | PAINTS AND VARNISHES - MEASUREMENT OF DRY FILM THICKNESS ON ROUGH SURFACES - TEST METHOD |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| 17/30286850 DC : DRAFT SEP 2017 | BS EN ISO 19277 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - QUALIFICATION TESTING AND ACCEPTANCE CRITERIA FOR PROTECTIVE COATING SYSTEMS UNDER INSULATION |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS EN 13507:2010 | Thermal spraying. Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| I.S. EN 15311:2007 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| 16/30337293 DC : 0 | BS EN ISO 12944-9 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES |
| BS ISO 15741:2016 | Paints and varnishes. Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| 13/30285580 DC : 0 | BS EN ISO 16961 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - INTERNAL PROTECTIVE COATING AND LINING OF ABOVE GROUND STEEL STORAGE TANKS |
| UNI EN 15655 : 2009 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| 17/30313373 DC : 0 | BS ISO 21809-11 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 11: COATING REPAIRS ON REHABILITATION |
| UNE-EN ISO 14916:2017 | Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017) |
| 14/30301174 DC : 0 | BS EN ISO 4628-7 - PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD |
| PREN 1090-2 : DRAFT 2015 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 05/30136491 DC : DRAFT JUL 2005 | EN 15311 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| 05/30131064 DC : DRAFT MAR 2005 | EN 15189:2005 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| 16/30340626 DC : 0 | BS EN 15655 - DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| BS 7079-0:1990 | Preparation of steel substrates before application of paints and related products Introduction |
| UNE-EN 1090-2:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| BS EN ISO 2063-1:2017 | Thermal spraying. Zinc, aluminium and their alloys Design considerations and quality requirements for corrosion protection systems |
| ISO 2063-2:2017 | Thermal spraying — Zinc, aluminium and their alloys — Part 2: Execution of corrosion protection systems |
| ISO 12944-8:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 8: Development of specifications for new work and maintenance |
| ISO 18647:2017 | Petroleum and natural gas industries — Modular drilling rigs for offshore fixed platforms |
| I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| DIN EN ISO 12944-6:1998-07 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS |
| DIN EN 1090-2:2015-07 (Draft) | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| UNI EN 1090-2 : 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| DIN EN 16813:2015-01 (Draft) | THERMAL SPRAYING - MEASUREMENT OF THE ELECTRICAL CONDUCTIVITY OF THERMAL SPRAYED NON-IRON METAL COATINGS BY MEANS OF EDDY CURRENT METHOD |
| DIN EN ISO 4628-7:2016-07 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2016) |
| DIN EN ISO 8503-2:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| BS EN ISO 8503-4:1995 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure |
| ISO 8504-2:2000 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning |
| I.S. EN ISO 14921:2010 | THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS |
| I.S. EN ISO 4628-7:2016 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD (ISO 4628-7:2016) |
| I.S. EN ISO 8503-3:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 3: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - FOCUSING MICROSCOPE PROCEDURE (ISO 8503-3:2012) |
| I.S. EN ISO 8503-4:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE (ISO 8503-4:2012) |
| I.S. EN ISO 8503-5:2017 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE (ISO 8503-5:2017) |
| I.S. EN ISO 8503-2:2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 2: METHOD FOR THE GRADING OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL - COMPARATOR PROCEDURE (ISO 8503-2:2012) |
| BS 7079-D1(2000) : 2000 AMD 13360 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - GROUP D: METHODS FOR SURFACE PREPARATION - PART D1: GENERAL PRINCIPLES |
| BS 7079-D2(2000) : 2000 AMD 13361 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - GROUP D: METHODS FOR SURFACE PREPARATION - PART D2: ABRASIVE BLAST CLEANING |
| BS 3900-C5(2007) : 2007 | PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| I.S. EN ISO 12944-6:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 6: LABORATORY PERFORMANCE TEST METHODS (ISO 12944-6:2018) |
| AEP-64 : 2012 | PERFORMANCE REQUIREMENTS FOR PAINT SYSTEMS RESISTANT TO CHEMICAL AGENTS AND DECONTAMINANTS, FOR THE PROTECTION OF LAND MILITARY EQUIPMENT |
| BS 7079-D2:1993 | Preparation of steel substrates before application of paints and related products. Methods for surface preparation Abrasive blast-cleaning |
| BS ISO 19354:2016 | Ships and marine technology. Marine cranes. General requirements |
| BS ISO 8503-5 : 2003 AMD 15516 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE |
| UNE-EN 13507:2011 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| 16/30339226 DC : DRAFT JUNE 2016 | BS EN 13507 - THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| BS EN ISO 14916:2017 | ENISO 14916 Thermal spraying -- Determination of tensile adhesive strength |
| 09/30197687 DC : 0 | BS ISO 14921 - THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS |
| 04/30109201 DC : DRAFT OCT 2004 | EN 14879-2 - ORGANIC COATING SYSTEMS AND LININGS FOR PROTECTION OF INDUSTRIAL APPARATUS AND PLANTS AGAINST CORROSION CAUSED BY AGGRESSIVE MEDIA - PART 2: COATINGS ON METALLIC COMPONENTS |
| BS 3900-H7(2003) : 2003 | PAINTS AND VARNISHES - EVALUATION OF DEGRADATION OF COATINGS - DESIGNATION OF QUANTITY AND SIZE OF DEFECTS, AND OF INTENSITY OF UNIFORM CHANGES IN APPEARANCE - PART 7: ASSESSMENT OF DEGREE OF CHALKING BY VELVET METHOD |
| AEP-63 : 2009 | PERFORMANCE REQUIREMENTS FOR NON-SKID COATING SYSTEMS |
| DIN 28055-1:2002-04 | CHEMICAL APPARATUS - SURFACE PROTECTION WITH ORGANIC LININGS FOR APPLICATION TO METALLIC COMPONENTS - PART 1: REQUIREMENTS |
| BS EN ISO 12679:2015 | Thermal spraying. Recommendations for thermal spraying |
| PREN 13507 : DRAFT 2016 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| ISO 16145-2:2012 | Ships and marine technology — Protective coatings and inspection method — Part 2: Void spaces of bulk carriers and oil tankers |
| BS EN ISO 12944-4:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Types of surface and surface preparation |
| I.S. EN ISO 14916:2017 | THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017) |
| I.S. EN ISO 12944-9:2018 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 9: PROTECTIVE PAINT SYSTEMS AND LABORATORY PERFORMANCE TEST METHODS FOR OFFSHORE AND RELATED STRUCTURES (ISO 12944-9:2018) |
| EN ISO 2063-1:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 1: Design considerations and quality requirements for corrosion protection systems (ISO 2063-1:2017) |
| PREN 15655 : DRAFT 2016 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| EN 1090-2:2008+A1:2011 | Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures |
| ISO 19354:2016 | Ships and marine technology — Marine cranes — General requirements |
| ISO 15741:2016 | Paints and varnishes — Friction-reduction coatings for the interior of on- and offshore steel pipelines for non-corrosive gases |
| ISO 10721-2:1999 | Steel structures — Part 2: Fabrication and erection |
| BS EN 1090-2 : 2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 12944-6:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 6: Laboratory performance test methods (ISO 12944-6:2018) |
| I.S. EN 15655:2009 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - INTERNAL POLYURETHANE LINING FOR PIPES AND FITTINGS - REQUIREMENTS AND TEST METHODS |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 5: Replica tape method for the determination of the surface profile |
| BS EN 10329 : 2005 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| UNE-EN ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017) |
| UNE-EN ISO 4628-7:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016) |
| BS EN ISO 4628-7:2016 | Paints and varnishes. Evaluation of degradation of coatings. Designation of quantity and size of defects, and of intensity of uniform changes in appearance Assessment of degree of chalking by velvet method |
| EEMUA 190 : 2000 | GUIDE FOR THE DESIGN, CONSTRUCTION AND USE OF MOUNDED HORIZONTAL CYLINDRICAL VESSELS FOR PRESSURISED STORAGE OF LPG AT AMBIENT TEMPERATURE |
| ONORM EN 1090-2 : 2012 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| EN ISO 8503-3:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure (ISO 8503-3:2012) |
| UNI EN 15189 : 2007 | DUCTILE IRON PIPES, FITTINGS AND ACCESSORIES - EXTERNAL POLYURETHANE COATING FOR PIPES - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 8503-4 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - STYLUS INSTRUMENT PROCEDURE |
| UNI EN ISO 8503-2 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 2: METHOD FOR THE GRADING OF SURFACE PROFILE OF ABRASIVE BLAST-CLEANED STEEL - COMPARATOR PROCEDURE |
| UNI EN ISO 14921 : 2011 | THERMAL SPRAYING - PROCEDURES FOR THE APPLICATION OF THERMALLY SPRAYED COATINGS FOR ENGINEERING COMPONENTS |
| UNI EN ISO 8503-3 : 2012 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 3: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE - FOCUSING MICROSCOPE PROCEDURE |
| ISO 12944-4:2017 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 4: Types of surface and surface preparation |
| BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| BS ISO 12670 : 2011 COR 2015 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| 10/30196823 DC : 0 | BS ISO 12670 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| 15/30294686 DC : 0 | BS ISO 19354 - SHIPS AND MARINE TECHNOLOGY - MARINE CRANES - GENERAL REQUIREMENTS |
| 99/707161 DC : DRAFT APR 99 | PREN 13480-4 METALLIC INDUSTRIAL PIPING - PART 4: FABRICATION AND INSTALLATION |
| DIN EN ISO 12679:2015-12 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| BS EN ISO 12670:2015 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| 15/30285031 DC : 0 | BS EN ISO 14916 - THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH |
| NACE TM 01 12 : 2012 | TEST TO DETERMINE THE POTENTIAL CORROSION EFFECTS OF BALLAST WATER TREATMENT SYSTEMS ON BALLAST TANKS |
| 16/30234880 DC : 0 | BS EN ISO 12944-5 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 5: PROTECTIVE PAINT SYSTEMS |
| UNE-EN ISO 12679:2016 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| 11/30242245 DC : 0 | BS ISO 16145-1 - SHIPS AND MARINE TECHNOLOGY - PROTECTIVE COATINGS AND INSPECTION METHOD - PART 1: DEDICATED SEA WATER BALLAST TANKS |
| EN ISO 12944-5:2018 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 5: Protective paint systems (ISO 12944-5:2018) |
| BS EN 15655:2009 | Ductile iron pipes, fittings and accessories. Internal polyurethane lining for pipes and fittings. Requirements and test methods |
| BS 7079-D1:1993 | Preparation of steel substrates before application of paints and related products. Methods for surface preparation General principles |
| BS EN 16813:2016 | Thermal spraying. Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method |
| API SPEC 16F : 2017 | SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
| I.S. EN ISO 12944-4:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
| UNE-EN 16813:2017 | Thermal spraying - Measurement of the electrical conductivity of thermal sprayed non-iron metal coatings by means of eddy current method |
| I.S. EN 13507:2010 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| BS EN ISO 2063-2:2017 | Thermal spraying. Zinc, aluminium and their alloys Execution of corrosion protection systems |
| NF EN 1090-2 : 2009 + A1 2011 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| 16/30339223 DC : 0 | BS EN 17002 - THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - THERMAL SPRAY PROCEDURE SPECIFICATION |
| EN ISO 12944-4:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 4: Types of surface and surface preparation (ISO 12944-4:2017) |
| ISO 16145-3:2012 | Ships and marine technology — Protective coatings and inspection method — Part 3: Cargo oil tanks of crude oil tankers |
| EN ISO 2063-2:2017 | Thermal spraying - Zinc, aluminium and their alloys - Part 2: Execution of corrosion protection systems (ISO 2063-2:2017) |
| I.S. EN ISO 8504-2:2001 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 2: ABRASIVE BLAST-CLEANING |
| UNI EN 13507 : 2010 | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| EN 13507:2010 | Thermal spraying - Pre-treatment of surfaces of metallic parts and components for thermal spraying |
| BS EN ISO 8504-1:2001 | Preparation of steel substrates before application of paints and related products. Surface preparation methods General principles |
| BS EN ISO 8504-2:2001 | Preparation of steel substrates before application of paints and related products. Surface preparation methods Abrasive blast cleaning |
| ISO 12679:2011 | Thermal spraying Recommendations for thermal spraying |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the grading of surface profile of abrasive blast-cleaned steel. Comparator procedure |
| BS EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media Linings on metallic components |
| ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
| ISO 14921:2010 | Thermal spraying Procedures for the application of thermally sprayed coatings for engineering components |
| UNE-EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| ISO 2808:2007 | Paints and varnishes Determination of film thickness |
| ISO 19840:2012 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
| BS EN 15311:2007 | Thermal spraying. Components with thermally sprayed coatings. Technical supply conditions |
| BS EN 15189:2006 | Ductile iron pipes, fittings and accessories. External polyurethane coating for pipes. Requirements and test methods |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| UNE-EN ISO 14921:2011 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
| ISO 12736:2014 | Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| ISO 12670:2011 | Thermal spraying — Components with thermally sprayed coatings — Technical supply conditions |
| UNE-EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| BS EN ISO 8503-3:1995 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Focusing microscope procedure |
| EN ISO 8504-2:2001 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast-cleaning (ISO 8504-2:2000) |
| EN ISO 14921:2010 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
| EN ISO 14916:2017 | Thermal spraying - Determination of tensile adhesive strength (ISO 14916:2017) |
| EN 15189:2006 | Ductile iron pipes, fittings and accessories - External polyurethane coating for pipes - Requirements and test methods |
| EN ISO 12679:2015 | Thermal spraying - Recommendations for thermal spraying (ISO 12679:2011) |
| EN ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| EN 14616:2004 | Thermal spraying - Recommendations for thermal spraying |
| EN ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
| EN ISO 2808:2007 | Paints and varnishes - Determination of film thickness (ISO 2808:2007) |
| EN ISO 8504-1:2001 | Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles (ISO 8504-1:2000) |
| EN 15311:2007 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions |
| EN ISO 4628-7:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 7: Assessment of degree of chalking by velvet method (ISO 4628-7:2016) |
| EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
| EN ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile (ISO 8503-5:2017) |
| EN ISO 12670:2015 | Thermal spraying - Components with thermally sprayed coatings - Technical supply conditions (ISO 12670:2011) |
| EN 14879-4:2007 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 4: Linings on metallic components |
| 16/30337299 DC : 0 | BS EN ISO 12944-8 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE |
| I.S. EN 16813:2016 | THERMAL SPRAYING - MEASUREMENT OF THE ELECTRICAL CONDUCTIVITY OF THERMAL SPRAYED NON-IRON METAL COATINGS BY MEANS OF EDDY CURRENT METHOD |
| 07/30174613 DC : 0 | BS ISO 20340 - PAINTS AND VARNISHES - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
| DIN EN ISO 12670:2015-12 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS (ISO 12670:2011) |
| DD ISO/TS 24817 : 2006 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COMPOSITE REPAIRS FOR PIPEWORK - QUALIFICATION AND DESIGN, INSTALLATION, TESTING AND INSPECTION |
| 01/122232 DC : DRAFT JUNE 2001 | BS ISO 20340 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PERFORMANCE REQUIREMENTS FOR PROTECTIVE PAINT SYSTEMS FOR OFFSHORE AND RELATED STRUCTURES |
| 02/704943 DC : DRAFT APR 2002 | PREN 10329 - STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| 14/30273517 DC : 0 | BS EN ISO 2063-1 - THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 1: PLANNING OF THE CORROSION PROTECTION SYSTEM AND COMPONENT DESIGN CONSIDERATIONS AND QUALITY REQUIREMENTS |
| DIN EN ISO 14916 E : 2017 | THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017) |
| 11/30242248 DC : 0 | BS ISO 16145-2 - SHIPS AND MARINE TECHNOLOGY - PROTECTIVE COATINGS AND INSPECTION METHOD - PART 2: VOID SPACES OF BULK CARRIERS AND OIL TANKERS |
| 16/30337296 DC : 0 | BS EN ISO 12944-4 - PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION |
| BS ISO 12679 : 2011 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING |
| DD ISO/TR 15235:2001 | Preparation of steel substrates before application of paints and related products. Collected information on the effect of levels of water-soluble salt contamination |
| 11/30242251 DC : 0 | BS ISO 16145-3 - SHIPS AND MARINE TECHNOLOGY - PROTECTIVE COATINGS AND INSPECTION METHOD - PART 3: CARGO OIL TANKS OF CRUDE OIL TANKERS |
| 14/30250433 DC : 0 | BS EN ISO 8503-5 - PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE |
| AEP-60 : 2009 | PERFORMANCE REQUIREMENTS FOR EXTERIOR TOPSIDES COATINGS |
| ISO 2063-1:2017 | Thermal spraying Zinc, aluminium and their alloys Part 1: Design considerations and quality requirements for corrosion protection systems |
| I.S. EN ISO 2063-2:2017 | THERMAL SPRAYING - ZINC, ALUMINIUM AND THEIR ALLOYS - PART 2: EXECUTION OF CORROSION PROTECTION SYSTEMS (ISO 2063-2:2017) |
| I.S. EN ISO 12679:2015 | THERMAL SPRAYING - RECOMMENDATIONS FOR THERMAL SPRAYING (ISO 12679:2011) |
| I.S. EN 1090-2:2008 | EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES |
| ISO 16145-1:2012 | Ships and marine technology — Protective coatings and inspection method — Part 1: Dedicated sea water ballast tanks |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN ISO 11124-1:1997 | Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives General introduction and classification |
| DIN EN ISO 14916:2015-09 (Draft) | THERMAL SPRAYING - DETERMINATION OF TENSILE ADHESIVE STRENGTH (ISO 14916:2017) |
| ISO 12944-6:2018 | Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 6: Laboratory performance test methods |
| AEP-59 : 2009 | APPLICATION PROCESS FOR OPTIMUM PAINT AND COATINGS SYSTEMS' PERFORMANCE |
| BS EN ISO 12944-8:2017 | Paints and varnishes. Corrosion protection of steel structures by protective paint systems Development of specifications for new work and maintenance |
| PREN 17002 : DRAFT 2016 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - THERMAL SPRAY PROCEDURE SPECIFICATION |
| DIN EN 13507:2016-07 (Draft) | THERMAL SPRAYING - PRE-TREATMENT OF SURFACES OF METALLIC PARTS AND COMPONENTS FOR THERMAL SPRAYING |
| EN 15655:2009 | Ductile iron pipes, fittings and accessories - Internal polyurethane lining for pipes and fittings - Requirements and test methods |
| EN ISO 12944-8:2017 | Paints and varnishes - Corrosion protection of steel structures by protective paint systems - Part 8: Development of specifications for new work and maintenance (ISO 12944-8:2017) |
| I.S. EN ISO 8504-1:2001 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE PREPARATION METHODS - PART 1: GENERAL PRINCIPLES |
| I.S. EN ISO 12944-8:2017 | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 8: DEVELOPMENT OF SPECIFICATIONS FOR NEW WORK AND MAINTENANCE (ISO 12944-8:2017) |
| DIN EN ISO 8503-4:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Stylus instrument procedure (ISO 8503-4:2012) |
| DIN EN ISO 8503-3:2012-06 | Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile - Focusing microscope procedure (ISO 8503-3:2012) |
| DIN EN ISO 8503-5:2005-03 | PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES - PART 5: REPLICA TAPE METHOD FOR THE DETERMINATION OF THE SURFACE PROFILE (ISO 8503-5:2017) |
| ISO 4628-7:2016 | Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of uniform changes in appearance Part 7: Assessment of degree of chalking by velvet method |
| BS EN ISO 14713:1999 | Protection against corrosion of iron and steel in structures. Zinc and aluminium coatings. Guidelines |
| BS EN ISO 8503-5:2017 | Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates Replica tape method for the determination of the surface profile |
| BS EN ISO 14921:2010 | Thermal spraying. Procedures for the application of thermally sprayed coatings for engineering components |
| DIN EN 15311:2007-06 | THERMAL SPRAYING - COMPONENTS WITH THERMALLY SPRAYED COATINGS - TECHNICAL SUPPLY CONDITIONS |
| DIN EN ISO 14921:2011-04 | Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components (ISO 14921:2010) |
| EN 10329:2006 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| DIN EN 10329:2006-04 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL FIELD JOINT COATINGS |
| DIN EN 10288:2003-12 | STEEL TUBES AND FITTINGS FOR ONSHORE AND OFFSHORE PIPELINES - EXTERNAL TWO-LAYER EXTRUDED POLYETHYLENE BASED COATINGS |
| ONORM EN ISO 12736 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| NACE AMPP SP21417:2023 | Performance Requirements for Navy Ships Exterior Topside Coatings |
| ISO 4287:1997 | Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
| ISO 8501-1:2007 | Preparation of steel substrates before application of paints and related products — Visual assessment of surface cleanliness — Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previous coatings |
| ISO 8503-2:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
| ISO 8503-3:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 3: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Focusing microscope procedure |
| ISO 8504-2:2000 | Preparation of steel substrates before application of paints and related products Surface preparation methods Part 2: Abrasive blast-cleaning |
| ISO 8503-4:2012 | Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.