ISO 14978:2006
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Geometrical product specifications (GPS) General concepts and requirements for GPS measuring equipment
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
29-11-2018
Superseded by
Published date
21-06-2006
Important note : All end users must be registered with an Account prior to user licenses being assigned.
ISO 14978:2006 specifies the general requirements, terms and definitions of characteristics of simple GPS measuring equipment, e.g. micrometers, dial gauges, callipers, surface plates, height gauges, gauge blocks, but not necessarily excluding more complicated equipment. It forms the basis for standards defining and describing the design characteristics and metrological characteristics for measuring equipment. It also gives guidance for the development and content of standards for GPS measuring equipment.
ISO 14978:2006 is intended to ease the communication between manufacturer/supplier and customer/user and to make the specification phase of GPS measuring equipment more accurate. It is also intended as a tool to be used in companies in the process of defining and selecting relevant characteristics for measuring equipment to be used in the quality assurance of measuring processes, i.e. in calibration and in workpiece measurements.
ISO 14978:2006 also includes terms which are frequently used in connection with the characterization of specific measuring equipment.
| DevelopmentNote |
Supersedes ISO/DIS 14978 (06/2006)
|
| DocumentType |
Standard
|
| Pages |
39
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| UNI EN ISO 14978 : 2006 | Identical |
| NF EN ISO 14978 : 2006 | Identical |
| SN EN ISO 14978 : 2006 CORR 2008 | Identical |
| ONORM EN ISO 14978 : 2008 | Identical |
| I.S. EN ISO 14978:2006 | Identical |
| NBN EN ISO 14978 : 2006 COR 2008 | Identical |
| DS EN ISO 14978 : 2006 COR 2008 | Identical |
| NEN EN ISO 14978 : 2006 C1 2008 | Identical |
| PN EN ISO 14978 : 2007 AC 2009 | Identical |
| AS ISO 14978-2007 | Identical |
| UNE-EN ISO 14978:2007 | Identical |
| BS EN ISO 14978:2006 | Identical |
| DIN EN ISO 14978:2006-09 | Identical |
| NS EN ISO 14978 : 2006 AC 2008 | Identical |
| 07/30170832 DC : DRAFT AUG 2007 | BS ISO 25178-602 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| DD CEN ISO/TS 15530-3:2007 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or standards |
| 08/30176399 DC : DRAFT JAN 2008 | BS ISO 26303-1 - MACHINE TOOLS - RELIABILITY, AVAILABILITY AND CAPABILITY - PART 1: CAPABILITY EVALUATION OF MACHINING PROCESSES ON METAL-CUTTING MACHINE TOOLS |
| I.S. EN ISO 1938-2:2017 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| BS EN ISO 25178-604:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| 11/30243507 DC : 0 | BS EN ISO 25178-70 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| 09/30198186 DC : 0 | BS EN ISO 13102 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL INDICATOR - DESIGN AND METROLOGICAL CHARACTERISTICS |
| UNI CEN ISO/TS 14253-3 : 2008 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| 14/30299349 DC : 0 | BS EN ISO 1938-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES |
| PD CEN ISO/TS 15530-1:2013 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Overview and metrological characteristics |
| 09/30198173 DC : DRAFT MAY 2009 | BS EN ISO 15530-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORK PIECES OR STANDARDS |
| BS EN ISO 9493:2010 | Geometrical product specifications (GPS). Dimensional measuring equipment: Dial test indicators (lever type). Design and metrological characteristics |
| BS EN ISO 14253-3:2011 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements |
| BS EN ISO 25178-605:2014 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (point autofocus probe) instruments |
| BS EN ISO 3611:2010 | Geometrical product specifications (GPS). Dimensional measuring equipment: Micrometers for external measurements. Design and metrological characteristics |
| I.S. EN ISO 17450-2:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES (ISO 17450-2:2012) |
| DIN EN ISO 25178-701:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| UNE-EN ISO 17450-2:2015 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| I.S. EN ISO 15530-3:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011) |
| DD CEN ISO/TS 14253-3:2007 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Guidelines for achieving agreements on measurement uncertainty statements |
| 08/30169333 DC : DRAFT MAR 2008 | BS ISO 13225-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS; HEIGHT GAUGES - PART 1: SIMPLE HEIGHT GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
| UNE-EN ISO 25178-602:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| I.S. EN ISO 25178-70:2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| UNI EN ISO 14253-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| UNI EN ISO 17450-2 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS, UNCERTAINTIES AND AMBIGUITIES |
| DIN EN ISO 463 : 2009-07 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
| EN ISO 14253-3:2011 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
| EN ISO 13102:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
| DIN EN ISO 1938-1:2016-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| 08/30181977 DC : DRAFT MAY 2008 | BS EN ISO 9493 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL REQUIREMENTS |
| BS EN ISO 13225:2012 | Geometrical product specifications (GPS). Dimensional measuring equipment; Height gauges. Design and metrological characteristics |
| UNE-EN ISO 13385-2:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
| 07/19984917 DC : 0 | BS ISO 14659 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| DIN EN ISO 8015:2011-09 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| BS EN ISO 17450-2:2012 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications, operators, uncertainties and ambiguities |
| I.S. EN ISO 13102:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
| DIN EN ISO 13385-1:2011-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-1:2011) |
| DIN EN ISO 25178-605:2014-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014) |
| UNI EN ISO 25178-701 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| 09/30196967 DC : 0 | BS EN ISO 25178-603 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS |
| BS EN ISO 25178-701:2010 | Geometrical product specifications (GPS). Surface texture. Areal Calibration and measurement standards for contact (stylus) instruments |
| NF EN ISO 13102 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS |
| NF EN ISO 3611 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN ISO 13385-1:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS; DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. CEN ISO TS 15530-3:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR STANDARDS |
| UNI EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPERS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| ISO 26303:2012 | Machine tools Short-term capability evaluation of machining processes on metal-cutting machine tools |
| NF EN ISO 13385-1 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: CALLIPER - DESIGN AND METROLOGICAL CHARACTERISTICS |
| UNI EN ISO 13102 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS |
| ISO 25178-70:2014 | Geometrical product specification (GPS) — Surface texture: Areal — Part 70: Material measures |
| ISO 13225:2012 | Geometrical product specifications (GPS) — Dimensional measuring equipment; Height gauges — Design and metrological characteristics |
| UNE-ISO 26303:2013 | Machine tools -- Short-term capability evaluation of machining processes on metal-cutting machine tools |
| VDI/VDE/DGQ 2618 Blatt 7.2:2008-07 | Inspection of measuring and test equipment - Test instruction for protractors |
| VDI/VDE 3699 Blatt 1:2015-04 | Process control using display screens - Terminology |
| DIN EN ISO 13225:2012-08 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| UNI EN ISO 25178-604 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS |
| DIN EN ISO 25178-602:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| BS EN ISO 1938-2:2017 | Geometrical product specifications (GPS). Dimensional measuring equipment Reference disk gauges |
| 13/30251855 DC : 0 | BS ISO 25178-606 - GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS |
| BS EN ISO 15530-3:2011 | Geometrical product specifications (GPS). Coordinate measuring machines (CMM). Technique for determining the uncertainty of measurement Use of calibrated workpieces or measurement standards |
| I.S. EN ISO 3611:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| BS EN ISO 25178-606:2015 | Geometrical product specification (GPS). Surface texture: Areal Nominal characteristics of non-contact (focus variation) instruments |
| UNI EN ISO 25178-601 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| BS EN ISO 25178-602:2010 | Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of non-contact (confocal chromatic probe) instruments |
| BS EN ISO 25178-603:2013 | Geometrical product specifications (GPS). Surface texture: Areal Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
| UNI EN ISO 25178-605 : 2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS |
| 07/30170829 DC : DRAFT AUG 2007 | BS ISO 25178-601 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| UNI EN ISO 15530-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS |
| DIN EN ISO 25178-70:2014-06 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES (ISO 25178-70:2014) |
| BS EN ISO 14253-5:2015 | Geometrical product specifications (GPS). Inspection by measurement of workpieces and measuring equipment Uncertainty in verification testing of indicating measuring instruments |
| BS ISO 26303:2012 | Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools |
| 09/30198179 DC : 0 | BS EN ISO 17450-2 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GENERAL CONCEPTS - PART 2: BASIC TENETS, SPECIFICATIONS, OPERATORS AND UNCERTAINTIES |
| UNI EN ISO 25178-602 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| BS EN ISO 13102:2012 | Geometrical product specifications (GPS). Dimensional measuring equipment. Electronic digital-indicator gauge. Design and metrological characteristics |
| 17/30333744 DC : 0 | BS EN ISO 25178-600 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 600: METROLOGICAL CHARACTERISTICS FOR AREAL-TOPOGRAPHY MEASURING METHODS |
| UNI EN ISO 3611 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| BS EN ISO 25178-70:2014 | Geometrical product specification (GPS). Surface texture: Areal Material measures |
| DIN EN ISO 25178-603:2014-02 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
| ISO/TR 14253-6:2012 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces |
| UNI EN ISO 25178-70 : 2014 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 70: MATERIAL MEASURES |
| UNE-EN ISO 8015:2012 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| UNE-EN ISO 9493:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
| UNI EN ISO 13225 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
| S.R. CEN ISO TS 14253-3:2007 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| ISO 463:2006 | Geometrical Product Specifications (GPS) — Dimensional measuring equipment — Design and metrological characteristics of mechanical dial gauges |
| ISO/TS 15530-1:2013 | Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics |
| I.S. EN ISO 13385-2:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS |
| EN ISO 13385-2:2011 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Calliper depth gauges; Design and metrological characteristics (ISO 13385-2:2011) |
| UNI EN ISO 463 : 2006 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
| EN ISO 25178-605:2014 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) |
| DIN EN ISO 25178-601:2011-01 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| 08/30180227 DC : DRAFT MAR 2008 | BS EN ISO 3611 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING INSTRUMENTS - MICROMETERS FOR EXTERNAL MEASUREMENTS - DESIGN AND METROLOGICAL CHARACTERISTICS |
| DIN EN ISO 13102:2012-12 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: ELECTRONIC DIGITAL-INDICATOR GAUGE - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13102:2012) |
| 11/30205376 DC : 0 | BS EN ISO 25178-605 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS |
| UNI CEN ISO/TS 15530-1 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS |
| XP CEN ISO/TS 15530-1 : 2013 XP | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS |
| NF EN ISO 9493 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| BS EN ISO 8015:2011 | Geometrical product specifications (GPS). Fundamentals. Concepts, principles and rules |
| I.S. EN ISO 9493:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| FD ISO/TR 14253-6 : 2013 FD | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 6: GENERALIZED DECISION RULES FOR THE ACCEPTANCE AND REJECTION OF INSTRUMENTS AND WORKPIECES |
| DD ISO/TS 17450-2:2002 | Geometrical product specifications (GPS). General concepts Basic tenets, specifications,operators and uncertainties |
| 09/30198170 DC : DRAFT MAY 2009 | BS EN ISO 14253-3 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORK PIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| NF EN ISO 14253-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| DIN EN ISO 14253-3:2011-10 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO 14253-3:2011) |
| UNE-EN ISO 13225:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| I.S. EN ISO 13225:2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13225:2012) |
| UNE-EN ISO 25178-601:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| I.S. EN ISO 14253-3:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 3: GUIDELINES FOR ACHIEVING AGREEMENTS ON MEASUREMENT UNCERTAINTY STATEMENTS |
| ISO/TR 230-11:2018 | Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests |
| S.R. CEN ISO/TS 15530-1:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 1: OVERVIEW AND METROLOGICAL CHARACTERISTICS (ISO/TS 15530-1:2013) |
| DIN EN ISO 15530-3:2012-01 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS (ISO 15530-3:2011) |
| I.S. EN ISO 25178-604:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
| I.S. EN ISO 25178-603:2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS (ISO 25178-603:2013) |
| EN ISO 15530-3:2011 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or measurement standards (ISO 15530-3:2011) |
| UNE-EN ISO 3611:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| I.S. EN ISO 25178-701:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| ISO 25178-603:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments |
| ISO 14253-5:2015 | Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 5: Uncertainty in verification testing of indicating measuring instruments |
| ISO 25178-605:2014 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments |
| ISO 9493:2010 | Geometrical product specifications (GPS) Dimensional measuring equipment: Dial test indicators (lever type) Design and metrological characteristics |
| ISO 17450-2:2012 | Geometrical product specifications (GPS) — General concepts — Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities |
| ISO 14253-3:2011 | Geometrical product specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
| ISO 1938-1:2015 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size |
| BS EN ISO 463:2006 | Geometrical Product Specifications (GPS). Dimensional measuring equipment. Design and metrological characteristics of mechanical dial gauges |
| ISO 3611:2010 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Micrometers for external measurements — Design and metrological characteristics |
| ISO 25178-604:2013 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments |
| ISO 13385-1:2011 | Geometrical product specifications (GPS) Dimensional measuring equipment Part 1: Callipers; Design and metrological characteristics |
| ISO 13102:2012 | Geometrical product specifications (GPS) — Dimensional measuring equipment: Electronic digital-indicator gauge — Design and metrological characteristics |
| ISO 8015:2011 | Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules |
| UNE-EN ISO 13385-1:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
| ISO/TS 15530-3:2004 | Geometrical Product Specifications (GPS) Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement Part 3: Use of calibrated workpieces or standards |
| ISO 13385-2:2011 | Geometrical product specifications (GPS) Dimensional measuring equipment Part 2: Calliper depth gauges; Design and metrological characteristics |
| ISO 25178-602:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments |
| ISO 25178-606:2015 | Geometrical product specification (GPS) — Surface texture: Areal — Part 606: Nominal characteristics of non-contact (focus variation) instruments |
| EN ISO 25178-606:2015 | Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) |
| EN ISO 14253-5:2015 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 5: Uncertainty in verification testing of indicating measuring instruments (ISO 14253-5:2015) |
| EN ISO 25178-602:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) |
| EN ISO 25178-701:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| EN ISO 13385-1:2011 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Callipers; Design and metrological characteristics (ISO 13385-1:2011) |
| EN ISO 9493:2010 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) |
| EN ISO 8015:2011 | Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) |
| EN ISO 25178-70:2014 | Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) |
| EN ISO 3611:2010 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| EN ISO 25178-601:2010 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) |
| EN ISO 13225:2012 | Geometrical product specifications (GPS) - Dimensional measuring equipment; Height gauges - Design and metrological characteristics (ISO 13225:2012) |
| EN ISO 17450-2:2012 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| EN ISO 25178-603:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) |
| EN ISO 1938-1:2015 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 1: Plain limit gauges of linear size (ISO 1938-1:2015) |
| EN ISO 1938-2:2017 | Geometrical product specifications (GPS) - Dimensional measuring equipment - Part 2: Reference disk gauges (ISO 1938-2:2017) |
| EN ISO 25178-604:2013 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) |
| BS EN ISO 13385-2:2011 | Geometrical product specifications (GPS). Dimensional measuring equipment Calliper depth gauges. Design and metrological characteristics |
| UNE-EN ISO 13102:2013 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Electronic digital-indicator gauge - Design and metrological characteristics (ISO 13102:2012) |
| DIN EN ISO 25178-604:2013-12 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 604: NOMINAL CHARACTERISTICS OF NON-CONTACT (COHERENCE SCANNING INTERFEROMETRY) INSTRUMENTS (ISO 25178-604:2013) |
| DIN EN ISO 1938-2:2017-05 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: REFERENCE DISK GAUGES (ISO 1938-2:2017) |
| NF EN ISO 13225 : 2012 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT; HEIGHT GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
| ISO/TS 17450-2:2002 | Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
| 11/30231340 DC : 0 | BS EN ISO 1938-1 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE |
| BS EN ISO 1938-1:2015 | Geometrical product specifications (GPS). Dimensional measuring equipment Plain limit gauges of linear size |
| DIN EN ISO 17450-2:2013-04 | Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators, uncertainties and ambiguities (ISO 17450-2:2012) |
| 08/30171709 DC : DRAFT JAN 2008 | BS EN ISO 25178-701 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE - AREAL - PART 701: CALIBRATION AND MEASUREMENT STANDARDS FOR CONTACT (STYLUS) INSTRUMENTS |
| I.S. EN ISO 25178-605:2014 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 605: NOMINAL CHARACTERISTICS OF NON-CONTACT (POINT AUTOFOCUS PROBE) INSTRUMENTS (ISO 25178-605:2014) |
| UNI EN ISO 8015 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| DIN EN ISO 13385-2:2013-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES; DESIGN AND METROLOGICAL CHARACTERISTICS (ISO 13385-2:2011) |
| 13/30251870 DC : 0 | BS EN ISO 14253-5 - GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN TESTING INDICATING MEASURING INSTRUMENTS |
| BS EN ISO 25178-601:2010 | Geometrical product specifications (GPS). Surface texture. Areal Nominal characteristics of contact (stylus) instruments |
| BS EN ISO 13385-1:2011 | Geometrical product specifications (GPS). Dimensional measuring equipment Callipers; Design and metrological characteristics |
| UNI EN ISO 9493 : 2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT: DIAL TEST INDICATORS (LEVER TYPE) - DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN ISO 25178-606:2015 | GEOMETRICAL PRODUCT SPECIFICATION (GPS) - SURFACE TEXTURE: AREAL - PART 606: NOMINAL CHARACTERISTICS OF NON-CONTACT (FOCUS VARIATION) INSTRUMENTS (ISO 25178-606:2015) |
| I.S. EN ISO 1938-1:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 1: PLAIN LIMIT GAUGES OF LINEAR SIZE (ISO 1938-1:2015) |
| ISO 15530-3:2011 | Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 3: Use of calibrated workpieces or measurement standards |
| UNI EN ISO 13385-2 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - PART 2: CALLIPER DEPTH GAUGES - DESIGN AND METROLOGICAL CHARACTERISTICS |
| I.S. EN ISO 8015:2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - FUNDAMENTALS - CONCEPTS, PRINCIPLES AND RULES |
| UNE-EN ISO 25178-701:2011 | Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) |
| NF EN ISO 15530-3 : 2011 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - COORDINATE MEASURING MACHINES (CMM): TECHNIQUE FOR DETERMINING THE UNCERTAINTY OF MEASUREMENT - PART 3: USE OF CALIBRATED WORKPIECES OR MEASUREMENT STANDARDS |
| UNI EN ISO 25178-603 : 2013 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 603: NOMINAL CHARACTERISTICS OF NON-CONTACT (PHASE-SHIFTING INTERFEROMETRIC MICROSCOPY) INSTRUMENTS |
| I.S. EN ISO 14253-5:2015 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - INSPECTION BY MEASUREMENT OF WORKPIECES AND MEASURING EQUIPMENT - PART 5: UNCERTAINTY IN VERIFICATION TESTING OF INDICATING MEASURING INSTRUMENTS (ISO 14253-5:2015) |
| I.S. EN ISO 25178-601:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 601: NOMINAL CHARACTERISTICS OF CONTACT (STYLUS) INSTRUMENTS |
| I.S. EN ISO 25178-602:2010 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: AREAL - PART 602: NOMINAL CHARACTERISTICS OF NON-CONTACT (CONFOCAL CHROMATIC PROBE) INSTRUMENTS |
| ISO 25178-601:2010 | Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments |
| ISO/TS 14253-3:2002 | Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 3: Guidelines for achieving agreements on measurement uncertainty statements |
| ISO 25178-701:2010 | Geometrical product specifications (GPS) Surface texture: Areal Part 701: Calibration and measurement standards for contact (stylus) instruments |
| ISO 1938-2:2017 | Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Reference disk gauges |
| DIN EN ISO 463:2006-06 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - DIMENSIONAL MEASURING EQUIPMENT - DESIGN AND METROLOGICAL CHARACTERISTICS OF MECHANICAL DIAL GAUGES |
| CEN ISO/TS 15530-3:2007 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 3: Use of calibrated workpieces or standards (ISO/TS 15530-3:2004) |
| DIN EN ISO 3611:2011-03 | Geometrical product specifications (GPS) - Dimensional measuring equipment: Micrometers for external measurements - Design and metrological characteristics (ISO 3611:2010) |
| CEN ISO/TS 14253-3:2007 | Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements (ISO/TS 14253-3:2002) |
| CEN ISO/TS 15530-1:2013 | Geometrical product specifications (GPS) - Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement - Part 1: Overview and metrological characteristics (ISO/TS 15530-1:2013) |
| ASME B89.7.1 : 2016 | GUIDELINES FOR ADDRESSING MEASUREMENT UNCERTAINTY IN THE DEVELOPMENT AND APPLICATION OF ASME B89 STANDARDS |
| ISO/TR 14638:1995 | Geometrical product specification (GPS) Masterplan |
| ISO/TS 17450-2:2002 | Geometrical product specifications (GPS) General concepts Part 2: Basic tenets, specifications, operators and uncertainties |
| ISO 12179:2000 | Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
| ISO 5459:2011 | Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems |
| ISO/TS 14253-2:1999 | Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 2: Guide to the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification |
| ISO 2692:2014 | Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) |
| ISO 1101:2017 | Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out |
| ISO 1:2016 | Geometrical product specifications (GPS) Standard reference temperature for the specification of geometrical and dimensional properties |
| ISO 14253-1:2017 | Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 1: Decision rules for verifying conformity or nonconformity with specifications |
| ISO 8062-3:2007 | Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings |
| ISO 3650:1998 | Geometrical Product Specifications (GPS) Length standards Gauge blocks |
| ISO/TR 16015:2003 | Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.