IEC 60245-2:1994+AMD1:1997+AMD2:1997 CSV
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 2: Test methods
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
15-11-2021
Language(s)
English - French, French, English
Published date
31-03-1998
Publisher
Gives the test methods specified in all parts of IEC 60245 as far as not laid down in IEC 60811, plus those in Amendment 1 (1997) (Flexing test) and Amendment 2 (1998) (Three pulley flexing test and kink test) This consolidated version consists of the second edition (1994), its amendment 1 (1997) and its amendment 2 (1997). Therefore, no need to order amendments in addition to this publication.
| Committee |
TC 20
|
| DevelopmentNote |
Former IEC 245 Pt2 (10/2012) Stability Date: 2020. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
49
|
| PublisherName |
International Electrotechnical Committee
|
| Status |
Superseded
|
| Supersedes |
| Standards | Relationship |
| VDE 0282-2 : 2003 | Identical |
| DIN VDE 0282-2 : 2003 | Identical |
| VDE 0472-603 : 1989 | Similar to |
| DIN VDE 0472-603 : 1989 | Identical |
| GOST IEC 60245-2 : 2011 | Identical |
| VDE 0472-805 : 1994 | Identical |
| NFC 32 102-2 : 1999 AMD 1 2003 | Similar to |
| DIN VDE 0472-805 : 1994 | Identical |
| GOST R IEC 60245-2 : 2002 | Identical |
| DIN VDE 0282-2 : 2003 | Corresponds |
| DIN VDE 0472-805 : 1994 | Corresponds |
| DIN VDE 0472-603 : 1989 | Corresponds |
| CSA E60335.2.55 : 2005 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
| 14/30289997 DC : 0 | BS EN 62893-1 - CHARGING CABLES FOR ELECTRIC VEHICLES - PART 1: GENERAL REQUIREMENTS |
| IEEE 525-2007 | IEEE Guide for the Design and Installation of Cable Systems in Substations |
| IEC 61851-1:2017 | Electric vehicle conductive charging system - Part 1: General requirements |
| ISO/IEC 14543-3-6:2007 | Information technology Home electronic system (HES) architecture Part 3-6: Media and media dependent layers Network based on HES Class 1, twisted pair |
| NF EN 50090-5-2 : 2004 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 5-2: MEDIA AND MEDIA DEPENDENT LAYERS - NETWORK BASED ON HBES CLASS 1, TWISTED PAIR |
| BS EN 61851-21:2002 | Electric vehicle conductive charging system Electric vehicle requirements for conductive connection to an a.c./d.c. supply |
| IEC 60694:1996+AMD1:2000+AMD2:2001 CSV | Common specifications for high-voltage switchgear and controlgear standards |
| IEC 60335-2-78:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-78: Particular requirements for outdoor barbecues |
| EN 61851-1:2011 | Electric vehicle conductive charging system - Part 1: General requirements |
| EN 60799:1998 | Electrical accessories - Cord sets and interconnection cord sets |
| CSA E598.2.2 : 1998 : INC : UPD 1 : 1998 : R2012 | LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 2: RECESSED LUMINAIRES |
| CSA E60335.2.55 : 2005 : R2013 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-55: PARTICULAR REQUIREMENTS FOR ELECTRICAL APPLIANCES FOR USE WITH AQUARIUMS AND GARDEN PONDS |
| CAN/CSA-E598-2-2-98 (R2017) | Luminaires - Part 2: Particular Requirements - Section 2: Recessed Luminaires (Adopted IEC 598-2-2:1996, second edition, including Amendment 1:1997, with Canadian deviations) | Luminaires - Partie 2: Règles particulières - Section 2: Luminaires encastrés (norme CEI 598-2-2:1996 adoptée, deuxième édition, avec l\'amendement 1:1997, avec exigences propres au Canada) |
| IEC 62893-3:2017 | Charging cables for electric vehicles for rated voltages up to and including 0,6/1 kV - Part 3: Cables for AC charging according to modes 1, 2 and 3 of IEC 61851-1 of rated voltages up to and including 450/750 V |
| IEEE DRAFT 525 : D15 2006 | DESIGN AND INSTALLATION OF CABLE SYSTEMS IN SUBSTATIONS |
| I.S. EN 61851-1:2011 | ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
| IEC 62930:2017 | Electric cables for photovoltaic systems with a voltage rating of 1,5 kV DC |
| UNE-EN 61851-1:2012 | Electric vehicle conductive charging system - Part 1: General requirements |
| 97/703042 DC : DRAFT FEB 1997 | PREN 50275-1 - CONDUCTIVE CHARGING FOR ELECTRIC VEHICLES - PART 1: GENERAL CONSIDERATIONS |
| EN 61851-21:2002 | Electric vehicle conductive charging system - Part 21: Electric vehicle requirements for conductive connection to an a.c/d.c. supply |
| IEC 60245-8:1998+AMD1:2003+AMD2:2011 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility |
| IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
| IEEE 1048-2003 | IEEE Guide for Protective Grounding of Power Lines |
| IEC 61138:2007 | Cables for portable earthing and short-circuiting equipment |
| 08/30186704 DC : DRAFT JULY 2008 | BS EN 61851-1 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM - PART 1: GENERAL REQUIREMENTS |
| 05/30128938 DC : DRAFT FEB 2005 | IEC 61138 ED.3 - CABLES FOR PORTABLE EARTHING AND SHORT-CIRCUITING EQUIPMENT |
| 14/30313775 DC : 0 | BS EN 62893-3 - CHARGING CABLES FOR ELECTRIC VEHICLES - PART 3: CABLES FOR AC CHARGING ACCORDING TO MODES 1, 2 AND 3 OF IEC 61851-1 |
| CSA ISO/IEC 14543-3-6 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| IEEE 1246-2011 REDLINE | IEEE Guide for Temporary Protective Grounding Systems Used in Substations |
| IEC 60245-5:1994 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 5: Lift cables |
| IEC 61316:1999 | Industrial cable reels |
| BS EN 61851-1:2011 | Electric vehicle conductive charging system General requirements |
| 15/30269927 DC : 0 | BS EN 61851-1 ED 3.0 - ELECTRIC VEHICLE CONDUCTIVE CHARGING SYSTEM PART 1: GENERAL REQUIREMENTS |
| CSA ISO/IEC 14543-3-6 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CAN/CSA-ISO/IEC 14543-3-6-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-6: Media and Media Dependent Layers - Twisted Pair for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-6:2007, first edition, 2007-01) |
| IEC 60245-1:2003+AMD1:2007 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
| IEC 60335-2-55:2002+AMD1:2008 CSV | Household and similar electrical appliances - Safety - Part 2-55: Particular requirements for electrical appliances for use with aquariums and garden ponds |
| CEI EN IEC 61851-1:2019 | Electric vehicle conductive charging system Part 1: General requirements<br> |
| IEC 60245-1:2003+AMD1:2007 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 1: General requirements |
| IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
| AS/NZS IEC 60245.4:2020 | Rubber insulated cables - Rated voltages up to and including 450/750 V Cords and flexible cables |
| ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
| IEC 60811-1-2:1985 | Common test methods for insulating and sheathing materials of electric cables - Part 1: Methods for general application - Section Two: Thermal ageing methods |
| IEC 60245-8:1998+AMD1:2003+AMD2:2011 CSV | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 8: Cords for applications requiring high flexibility |
| IEC 60245-4:2011 | Rubber insulated cables - Rated voltages up to and including 450/750 V - Part 4: Cords and flexible cables |
| IEC 60811-1-1:1993+AMD1:2001 CSV | Common test methods for insulating and sheathing materials of electric cables and optical cables - Part 1-1: Methods for general application - Measurement of thickness and overall dimensions - Tests for determining the mechanical properties |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.