I.S. EN 13757-1:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
COMMUNICATION SYSTEMS FOR METERS - PART 1: DATA EXCHANGE
Hardcopy , PDF
03-01-2022
English
01-01-2014
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General description and security
5 Network Architecture
6 Application Layers for Metering
7 Data Exchange
8 Upper Layer Protocols
9 Cross-application data handling
10 Extensions to COSEM
11 Object Identification System (OBIS)
Annex A (normative) - Basic class meters
Annex B (informative) - DLMS Glossary
Annex C (informative) - Gas Volume Conversion
Annex D (normative) - Country specific identifiers
Bibliography
Describes data exchange and communications for meters and remote reading of meters in a generic way.
DocumentType |
Standard
|
Pages |
146
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
Standards | Relationship |
EN 13757-1:2014 | Identical |
UNI EN 13757-1 : 2003 | Identical |
NBN EN 13757-1 : 2014 | Identical |
SN EN 13757-1 : 2015 | Identical |
BS EN 13757-1:2014 | Identical |
NEN EN 13757-1 : 2014 | Identical |
NF EN 13757-1 : 2014 | Identical |
UNE-EN 13757-1:2015 | Identical |
DIN EN 13757-1:2015-01 | Identical |
NS EN 13757-1 : 2014 | Identical |
ONORM EN 13757-1 : 2014 | Identical |
EN 60870-5-2:1993 | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures |
EN 62056-9-7 : 2013 | ELECTRICITY METERING DATA EXCHANGE - THE DLMS/COSEM SUITE - PART 9-7: COMMUNICATION PROFILE FOR TCP-UDP/IP NETWORKS (IEC 62056-9-7:2013) |
EN 12405-1:2005+A2:2010 | Gas meters - Conversion devices - Part 1: Volume conversion |
EN 61334-4-41:1996 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 41: Application protocols - Distribution line message specification |
ISO 1155:1978 | Information processing Use of longitudinal parity to detect errors in information messages |
ISO/IEC 7498-1:1994 | Information technology Open Systems Interconnection Basic Reference Model: The Basic Model |
CEN/CLC/ETSI TR 50572:2011 | Functional Reference Architecture for Communications in Smart Metering Systems |
ISO/IEC 15954:1999 | Information technology Open Systems Interconnection Connection-mode protocol for the Application Service Object Association Control Service Element |
EN 62056-46:2002/A1:2007 | ELECTRICITY METERING - DATA EXCHANGE FOR METER READING, TARIFF AND LOAD CONTROL - PART 46: DATA LINK LAYER USING HDLC PROTOCOL |
EN 62056-3-1:2014 | Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling |
ISO/IEC 15953:1999 | Information technology Open Systems Interconnection Service definition for the Application Service Object Association Control Service Element |
EN 61334-6:2000 | Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule |
EN 62056-21:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange |
ISO 9506-1:2003 | Industrial automation systems Manufacturing Message Specification Part 1: Service definition |
IEC 61334-6:2000 | Distribution automation using distribution line carrier systems - Part 6: A-XDR encoding rule |
EN 13757-5:2015 | Communication systems for meters - Part 5: Wireless M-Bus relaying |
IEC 62056-5-3:2017 | Electrcity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer |
ISO 1745:1975 | Information processing Basic mode control procedures for data communication systems |
EN 61334-4-1:1996 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 1: Reference model of the communication system |
ISO 7498-2:1989 | Information processing systems Open Systems Interconnection Basic Reference Model Part 2: Security Architecture |
EN 1434-2:2015 | Heat meters - Part 2: Constructional requirements |
IEC 62056-21:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange |
EN 13757-4:2013 | Communication systems for meters and remote reading of meters - Part 4: Wireless meter readout (Radio meter reading for operation in SRD bands) |
IEC 62056-42:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange |
IEC TR 62051-1:2004 | Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipment using DLMS/COSEM |
ISO/IEC 13239:2002 | Information technology Telecommunications and information exchange between systems High-level data link control (HDLC) procedures |
IEC 62056-47:2006 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks |
EN 62056-5-3:2017 | Electricity metering data exchange - The DLMS/COSEM suite - Part 5-3: DLMS/COSEM application layer |
ISO 1177:1985 | Information processing Character structure for start/stop and synchronous character oriented transmission |
EN 62056-7-6:2013 | Electricity metering data exchange - The DLMS/COSEM suite - Part 7-6: The 3-layer, connection-oriented HDLC based communication profile |
IEC 60870-5-2:1992 | Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures |
EN 62056-47:2007 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 47: COSEM transport layers for IPv4 networks |
IEC 61334-4-41:1996 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 41: Application protocol - Distribution line message specification |
ISO/IEC 646:1991 | Information technology ISO 7-bit coded character set for information interchange |
IEC 62056-7-6:2013 | Electricity metering data exchange - The DLMS/COSEM suite - Part 7-6: The 3-layer, connection-oriented HDLC based communication profile |
IEC 62056-9-7:2013 | Electricity metering data exchange - The DLMS/COSEM suite - Part 9-7: Communication profile for TCP-UDP/IP networks |
EN 13757-6:2015 | Communication systems for meters - Part 6: Local Bus |
ISO/IEC 8824-1:2015 | Information technology Abstract Syntax Notation One (ASN.1): Specification of basic notation Part 1: |
CEN/CLC/ETSI/TR 50572 : 2011 | FUNCTIONAL REFERENCE ARCHITECTURE FOR COMMUNICATIONS IN SMART METERING SYSTEMS |
IEC 62056-3-1:2013 | Electricity metering data exchange - The DLMS/COSEM suite - Part 3-1: Use of local area networks on twisted pair with carrier signalling |
IEC 62056-6-1:2017 | Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) |
IEC 62056-46:2002+AMD1:2006 CSV | Electricity metering - Data exchange for meter reading, tariff and load control - Part 46: Data link layer using HDLC protocol |
EN 1434-1:2015 | Heat meters - Part 1: General requirements |
ISO/IEC 8802-2:1998 | Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 2: Logical link control |
EN 62056-42:2002 | Electricity metering - Data exchange for meter reading, tariff and load control - Part 42: Physical layer services and procedures for connection-oriented asynchronous data exchange |
EN 1434-3:2015 | Heat meters - Part 3: Data exchange and interfaces |
IEC 61334-4-1:1996 | Distribution automation using distribution line carrier systems - Part 4: Data communication protocols - Section 1: Reference model of the communication system |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.