I.S. EN 12453:2017
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - SAFETY IN USE OF POWER OPERATED DOORS - REQUIREMENTS AND TEST METHODS
Hardcopy , PDF
27-01-2022
English
01-01-2017
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National Foreword
European foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or protective measures
6 Verification of the safety requirements and/or protective
measures
7 Information for use
Annex A (normative) - Limitation of forces
Annex B (informative) - Examples of mechanical protection
and safety distances
Annex C (normative) - Force measuring method
Annex D (normative) - Testing method for presence detection
Annex E (informative) - Safeguarding against dropping by
other design features incorporated in the suspension
system of vertically moving power operated door
leaves
Annex F (informative) - Relationship between Hazards,
Requirements and Test clauses
Annex ZA (informative) - Relationship between this
European standard and the Essential
Requirements of Directive 2006/42/EC aimed
to be covered
Bibliography
Gives requirements and test methods for the safety in use of power operated doors, gates and barriers, intended for installation in areas in the reach of persons, and for which the main intended use is giving safe access for goods and vehicles accompanied or driven by persons in industrial, commercial or residential premises.
| DevelopmentNote |
Supersedes I.S. EN 12445. (09/2017)
|
| DocumentType |
Standard
|
| Pages |
66
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| DIN EN 12453:2005-05 (Draft) | Identical |
| NF EN 12453 : 2017 | Identical |
| EN 12453 : 2017 COR 2017 | Identical |
| NBN EN 12453 : 2001 | Identical |
| ONORM EN 12453 : 2017 | Identical |
| UNE-EN 12453:2001 | Identical |
| NS EN 12453 : 2017 | Identical |
| UNI EN 12453 : 2002 | Identical |
| BS EN 12453:2001 | Identical |
| EN 12453:2017 | Identical |
| NEN EN 12453 : 2017 | Identical |
| SN EN 12453 : 2017 | Identical |
| EN 60335-2-103:2015 | Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows |
| EN 61000-6-1:2007 | Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments |
| EN 61000-6-3:2007/A1:2011/AC:2012 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010) |
| EN 12433-1:1999 | Industrial, commercial and garage doors and gates - Terminology - Part 1: Types of doors |
| EN 61496-3:2001 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| ISO 4413:2010 | Hydraulic fluid power General rules and safety requirements for systems and their components |
| EN 349:1993+A1:2008 | Safety of machinery - Minimum gaps to avoid crushing of parts of the human body |
| EN 12635:2002+A1:2008 | Industrial, commercial and garage doors and gates - Installation and use |
| EN 12978:2003+A1:2009 | Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
| EN ISO 13857:2008 | Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| EN 12433-2:1999 | Industrial, commercial and garage doors and gates - Terminology - Part 2: Parts of doors |
| EN 61000-6-2:2005/corrigendum:2005 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005) |
| IEC 61496-3:2008 | Safety of machinery - Electro-sensitive protective equipment - Part 3: Particular requirements for Active Opto-electronic Protective Devices responsive to Diffuse Reflection (AOPDDR) |
| EN 61000-6-4:2007/A1:2011 | ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
| EN ISO 4414:2010 | Pneumatic fluid power - General rules and safety requirements for systems and their components (ISO 4414:2010) |
| EN 61032:1998 | Protection of persons and equipment by enclosures - Probes for verification |
| ISO 13857:2008 | Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| PREN 12604 : DRAFT 2014 | INDUSTRIAL, COMMERCIAL AND GARAGE DOORS AND GATES - MECHANICAL ASPECTS - REQUIREMENTS AND TEST METHODS |
| EN ISO 13849-1:2015 | Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
| ISO 4414:2010 | Pneumatic fluid power General rules and safety requirements for systems and their components |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 60335-2-95:2011+AMD1:2015+AMD2:2017 CSV | Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| EN ISO 4413:2010 | Hydraulic fluid power - General rules and safety requirements for systems and their components (ISO 4413:2010) |
| ISO 13849-1:2015 | Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
| EN 60204-1 : 2006 COR 2010 | SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
| EN 60335-2-95:2015/A1:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-95: PARTICULAR REQUIREMENTS FOR DRIVES FOR VERTICALLY MOVING GARAGE DOORS FOR RESIDENTIAL USE (IEC 60335-2-95:2011/A1:2015) |
| IEC 60335-2-103:2015+AMD1:2017 CSV | Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.