EN 310:1993
Current
Current
The latest, up-to-date edition.
Wood-based panels - Determination of modulus of elasticity in bending and of bending strength
Published date
26-02-1993
Publisher
Cooperating organizations
National foreword
Foreword
1 Scope
2 Normative references
3 Principle
4 Apparatus
5 Test pieces
6 Procedure
7 Expression of results
8 Test report
Annex A (informative) Bibliography
National annex NA (informative) Committees responsible
National annex NB (informative) Cross-reference
This European Standard specifies a method of determining the apparent modulus of elasticity in flatwise bending and bending strength of wood-based panels of nominal thickness equal to or greater than 3 mm. Note: Structural design values shall be determined according to methods according to EN (124.102).
| Committee |
CEN/TC 112
|
| DevelopmentNote |
Replaces NFB 51-124
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| BS EN 310:1993 | Identical |
| NS EN 310 : 1ED 1993 | Identical |
| NF EN 310 : 1993 | Identical |
| PN EN 310 : 1994 | Identical |
| SN EN 310 : 1993 | Identical |
| NBN EN 310 : 1994 | Identical |
| DIN 52362-1:1965-04 | Identical |
| I.S. EN 310:1993 | Identical |
| DIN EN 310:1993-08 | Identical |
| UNI EN 310 : 1994 | Identical |
| UNE-EN 310:1994 | Identical |
| NEN EN 310 : 1993 | Identical |
| DIN 52362-1:1965-04 | Corresponds |
| 98/107286 DC : DRAFT OCT 1998 | PREN 13353-3 - SOLID WOOD PANELS - SPECIFICATIONS - PART 3: REQUIREMENTS FOR USE IN EXTERIOR CONDITIONS |
| UNE-EN 1156:2013 | Wood-based panels - Determination of duration of load and creep factors |
| 08/30181440 DC : DRAFT JULY 2008 | BS EN 622-4 - FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| 03/315086 DC : DRAFT SEP 2003 | EN 622-2 - FIBREBOARDS - SPECIFICATIONS - PART 2 - REQUIREMENTS FOR HARDBOARDS |
| DIN EN 14272:2012-03 | Plywood - Calculation method for some mechanical properties; German version EN 14272:2011 |
| 04/30113724 DC : DRAFT MAY 2004 | EN 300 - ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. CEN/TS 14966:2005 | WOOD-BASED PANELS - SMALL SCALE INDICATIVE TEST METHODS FOR CERTAIN MECHANICAL PROPERTIES |
| S.R. CEN TS 15534-1:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 1: TEST METHODS FOR CHARACTERISATION OF WPC MATERIALS AND PRODUCTS |
| S.R. CEN/TS 15679:2007 | THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS |
| I.S. EN 622-4:2009 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| UNE-EN 622-4:2010 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| BS EN 300:2006 | Oriented strand boards (OSB). Definitions, classification and specifications |
| BS EN 14279 : 2004 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| BS EN 636-1:1997 | Plywood. Specifications Requirements for plywood for use in dry conditions |
| BS EN 15197:2007 | Wood-based panels. Flaxboards. Specifications |
| BS EN 326-2 : 2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| BS EN 636-2:1997 | Plywood. Specifications Requirements for plywood for use in humid conditions |
| BS EN 312:2010 | Particleboards. Specifications |
| DIN EN 634-2:2007-05 | CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERIOR CONDITIONS |
| EN 12369-3:2008 | Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels |
| CEN/TS 13810-2:2003 | Wood-based panels - Floating floors - Part 2: Test methods |
| CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products |
| EN 13353:2008+A1:2011 | Solid wood panels (SWP) - Requirements |
| EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| CEN/TS 15679:2007 | Thermal Modified Timber - Definitions and characteristics |
| CEN/TS 14966:2005 | Wood-based panels - Small scale indicative test methods for certain mechanical properties |
| CEN/TS 16368:2014 | Lightweight Particleboards - Specifications |
| EN 1156:2013 | Wood-based panels - Determination of duration of load and creep factors |
| ENV 14272:2002 | Plywood - Calculation method for some mechanical properties |
| ENV 1156:1998 | Wood-based panels - Determination of duration of load and creep factors |
| NF EN 13353 : 2009 + A1 2011 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| 12/30266170 DC : 0 | BS EN 15534-1 - COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1 : TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| 10/30234290 DC : 0 | BS EN 636 - PLYWOOD - SPECIFICATIONS |
| BS EN 12369-3:2008 | Wood-based panels. Characteristic values for structural design Solid-wood panels |
| ENV 13550:1999 | ADVANCED MANUFACTURING TECHNOLOGY - SYSTEMS ARCHITECTURE - ENTERPRISE MODEL EXECUTION AND INTEGRATION SERVICES |
| BS EN 15534-1 : 2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| 01/107952 DC : DRAFT NOV 2001 | PREN 14279 - LAMINATED VENEER TIMBER (LVL) - SPECIFICATIONS, DEFINITIONS, CLASSIFICATION AND REQUIREMENTS |
| DD CEN/TS 14966:2005 | Wood-based panels. Small scale indicative test methods for certain mechanical properties |
| I.S. EN 15939:2011 | HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF WALL ATTACHMENT DEVICES |
| DD CEN/TS 15534-1:2007 | Wood-plastics composites (WPC) Test methods for characterisation of WPC materials and products |
| 05/30132017 DC : DRAFT APR 2005 | BS EN 634-2 - CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERNAL CONDITIONS |
| PREN 14374 : DRAFT 2016 | TIMBER STRUCTURES - LAMINATED VENEER LUMBER (LVL) - REQUIREMENTS |
| I.S. ENV 13550:1999 | ADVANCED MANUFACTURING TECHNOLOGY - SYSTEMS ARCHITECTURE - ENTERPRISE MODEL EXECUTION AND INTEGRATION SERVICES |
| I.S. ENV 14272:2002 | PLYWOOD - CALCULATION METHOD FOR SOME MECHANICAL PROPERTIES |
| UNI EN 14272 : 2012 | PLYWOOD - CALCULATION METHOD FOR SOME MECHANICAL PROPERTIES |
| PREN 636 : DRAFT 2010 | PLYWOOD - SPECIFICATIONS |
| DIN EN 15939:2015-12 (Draft) | HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF WALL ATTACHMENT DEVICES |
| DIN EN 13986:2015-06 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
| DIN EN 622-5:2010-03 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| BS EN 13377:2002 | Prefabricated timber formwork beams. Requirements, classification and assessment |
| UNE-EN 622-5:2010 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| BS EN 312-7:1997 | Particleboards. Specifications Requirements for heavy-duty load-bearing boards for use in humid conditions |
| I.S. EN 622-5:2009 | FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| I.S. EN 13353:2008 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| I.S. EN 634-2:2007 | CEMENT-BONDED PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR OPC BONDED PARTICLEBOARDS FOR USE IN DRY, HUMID AND EXTERNAL CONDITIONS |
| I.S. EN 300:2006 | ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. EN 636:2012 | PLYWOOD - SPECIFICATIONS |
| I.S. EN 13986:2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| I.S. EN 312:2010 | PARTICLEBOARDS - SPECIFICATIONS |
| I.S. EN 622-2:2004 | FIBREBOARDS - SPECIFICATIONS - REQUIREMENTS FOR HARDBOARDS |
| I.S. EN 12369-2:2011 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| I.S. EN 14279:2005 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| I.S. EN 622-3:2004 | FIBREBOARDS - SPECIFICATIONS - REQUIREMENTS FOR MEDIUM BOARDS |
| I.S. EN 326-2:2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNI EN 12369-2 : 2011 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| 98/107284 DC : DRAFT OCT 1998 | PREN 13353-1 - SOLID WOOD PANELS - SPECIFICATIONS - PART 1: REQUIREMENTS FOR USE IN DRY CONDITIONS |
| PREN 12369-2 : DRAFT 2009 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| DIN EN 1156:2013-10 | WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS |
| DIN EN 12369-3:2009-02 | Wood-based panels - Characteristic values for structural design - Part 3: Solid-wood panels |
| 09/30200047 DC : 0 | BS EN 12369-2 - WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 2: PLYWOOD |
| PD CEN/TS 16368:2014 | Lightweight Particleboards. Specifications |
| 12/30254092 DC : 0 | BS EN 16368 - LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| DD CEN/TS 13810-2:2003 | Wood-based panels. Floating floors Test methods |
| 09/30211230 DC : 0 | BS EN 14272 - PLYWOOD - CALCULATION METHOD FOR SOME MECHANICAL PROPERTIES |
| 07/30160760 DC : 0 | BS EN 13353 - SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| S.R. CEN/TS 16368:2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| ISO/TR 15655:2003 | Fire resistance Tests for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design |
| I.S. CEN/TS 13810-2:2003 | WOOD-BASED PANELS; FLOATING FLOORS; PART 2: TEST METHODS |
| I.S. EN 14272:2011 | PLYWOOD - CALCULATION METHOD FOR SOME MECHANICAL PROPERTIES |
| UNE-CEN/TS 15679:2009 EX | Thermal Modified Timber - Definitions and characteristics |
| UNI CEN/TS 16368 : 2014 | LIGHTWEIGHT PARTICLEBOARDS - SPECIFICATIONS |
| PREN 1156 : DRAFT 2011 | WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS |
| NF EN 622-4 : 2010 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| DIN EN 622-3:2004-07 | Fibreboards - Specifications - Part 3: Requirements for medium board |
| DIN EN 636:2015-05 | PLYWOOD - SPECIFICATIONS |
| BS EN 634-2:2007 | Cement-bonded particleboards. Specifications Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
| EN 13986:2004 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 13986:2004+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 634-2:2007 | Cement-bonded particleboards - Specifications - Part 2: Requirements for OPC bonded particleboards for use in dry, humid and external conditions |
| EN 15197:2007 | Wood-based panels - Flaxboards - Specifications |
| UNI EN 622-4 : 2010 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| UNI EN 312 : 2010 | PARTICLEBOARDS - SPECIFICATIONS |
| UNI EN 622-5 : 2010 | FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| EN 13879:2002 | Wood-based panels - Determination of edgewise bending properties |
| UNI EN 326-2 : 2014 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| UNI EN 13353 : 2011 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| EN 622-5:2009 | Fibreboards - Specifications - Part 5: Requirements for dry process boards (MDF) |
| UNI EN 622-2 : 2005 | FIBREBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR HARDBOARDS |
| UNI EN 14279 : 2009 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| UNI EN 1156 : 2013 | WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS |
| BS EN 1156:2013 | Wood-based panels. Determination of duration of load and creep factors |
| 09/30202519 DC : 0 | BS EN 312 - PARTICLEBOARDS - SPECIFICATIONS |
| 08/30181443 DC : DRAFT JULY 2008 | BS EN 622-5 - FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| UNI EN 12369-3 : 2009 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS |
| 98/107285 DC : DRAFT OCT 1998 | PREN 13353-2 - SOLID WOOD PANELS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR USE IN HUMID CONDITIONS |
| 05/30132020 DC : DRAFT APR 2005 | BS EN 15197 - WOOD-BASED PANELS - FLAXBOARDS - SPECIFICATIONS |
| 03/315082 DC : DRAFT SEP 2003 | EN 14755 - EXTRUDED PARTICLEBOARDS - SPECIFICATIONS |
| DD CEN/TS 15679:2007 | Thermal modified timber. Definitions and characteristics |
| UNI CEN/TS 15679 : 2008 | THERMAL MODIFIED TIMBER - DEFINITIONS AND CHARACTERISTICS |
| BS EN 15939 : 2011 | HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF WALL ATTACHMENT DEVICES |
| 09/30200076 DC : 0 | BS EN 15939 - HARDWARE FOR FURNITURE - DETERMINATION OF STRENGTH AND LOAD CAPACITY OF WALL ATTACHMENT DEVICES |
| UNI EN 15939 : 2014 | HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF WALL ATTACHMENT DEVICES |
| I.S. EN 1156:2013 | WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS |
| 15/30329092 DC : 0 | BS EN 15939 - HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF WALL ATTACHMENT |
| I.S. EN 12369-3:2009 | WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS |
| S.R. CEN TS 15534-3:2007 | WOOD-PLASTICS COMPOSITES (WPC) - PART 3: CHARACTERISATION OF WPC PRODUCTS |
| DIN EN 622-2:2004-07 | Fibreboards - Specifications - Part 2: Requirements for hardboards |
| DIN EN 300:2006-09 | ORIENTED STRAND BOARDS (OSB) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| BS EN 1128:1996 | Cement-bonded particleboards. Determination of hard body impact resistance |
| BS EN 14755:2005 | Extruded particleboards. Specifications |
| BS EN 312-4:1997 | Particleboards. Specifications Requirements for load-bearing boards for use in dry conditions |
| BS EN 312-5:1997 | Particleboards. Specifications Requirements for load-bearing boards for use in humid conditions |
| BS EN 13353 : 2008 | SOLID WOOD PANELS (SWP) - REQUIREMENTS |
| BS EN 622-2:2004 | Fibreboards. Specifications Requirements for hardboards |
| BS EN 622-4:2009 | Fibreboards. Specifications Requirements for softboards |
| UNE-EN 13353:2009 | Solid wood panels (SWP) - Requirements |
| BS EN 321:2002 | Wood-based panels. Determination of moisture resistance under cyclic test conditions |
| DIN EN 15197:2007-05 | Wood-based panels - Flaxboards - Specifications |
| BS EN 636-3:1997 | Plywood. Specifications Requirements for plywood for use in exterior conditions |
| BS EN 312-3:1997 | Particleboards. Specifications Requirements for boards for interior fitments (including furniture) for use in dry conditions |
| UNE-EN 312:2010 | Particleboards - Specifications |
| BS EN 12369-2:2011 | Wood-based panels. Characteristic values for structural design Plywood |
| BS EN 622-3:2004 | Fibreboards. Specifications Requirements for medium boards |
| UNE-EN 13986:2006 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| UNE-EN 12369-2:2011 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| EN 14755:2005 | Extruded particleboards - Specifications |
| EN 312-5 : 1997 | PARTICLEBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR LOAD-BEARING BOARDS FOR USE IN HUMID CONDITIONS |
| EN 636-3 : 1996 | PLYWOOD - SPECIFICATIONS - PART 3: REQUIREMENTS FOR PLYWOOD FOR USE IN EXTERIOR CONDITIONS |
| EN 15939:2011+A1:2014 | Hardware for furniture - Strength and loading capacity of wall attachment devices |
| EN 622-4:2009 | Fibreboards - Specifications - Part 4: Requirements for softboards |
| EN 312-7 : 1997 | PARTICLEBOARDS - SPECIFICATIONS - PART 7: REQUIREMENTS FOR HEAVY DUTY LOAD-BEARING BOARDS FOR USE IN HUMID CONDITIONS |
| EN 636-1 : 1996 | PLYWOOD - SPECIFICATIONS - PART 1: REQUIREMENTS FOR PLYWOOD FOR USE IN DRY CONDITIONS |
| EN 14279:2004+A1:2009 | Laminated Veneer Lumber (LVL) - Definitions, classification and specifications |
| EN 14272:2011 | Plywood - Calculation method for some mechanical properties |
| EN 636-2 : 1996 | PLYWOOD - SPECIFICATIONS - PART 2: REQUIREMENTS FOR PLYWOOD FOR USE IN HUMID CONDITIONS |
| EN 312-4 : 1996 | PARTICLEBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR LOAD-BEARING BOARDS FOR USE IN DRY CONDITIONS |
| EN 321:2001 | Wood-based panels - Determination of moisture resistance under cyclic test conditions |
| EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
| EN 636:2012+A1:2015 | Plywood - Specifications |
| EN 312:2010 | Particleboards - Specifications |
| EN 312-2 : 1996 | PARTICLEBOARDS - SPECIFICATIONS - PART 2: REQUIREMENTS FOR GENERAL PURPOSE BOARDS FOR USE IN DRY CONDITIONS |
| EN 300:2006 | Oriented Strand Boards (OSB) - Definitions, classification and specifications |
| EN 312-3 : 1996 | PARTICLEBOARDS - SPECIFICATIONS - PART 3: REQUIREMENTS FOR BOARDS FOR INTERIOR FITMENTS (INCLUDING FURNITURE) FOR USE IN DRY CONDITIONS |
| EN 312-6 : 1996 | PARTICLEBOARDS - SPECIFICATIONS - PART 6: REQUIREMENTS FOR HEAVY DUTY LOAD-BEARING BOARDS FOR USE IN DRY CONDITIONS |
| EN 622-3:2004 | Fibreboards - Specifications - Part 3: Requirements for medium boards |
| DD ENV 14272:2002 | Plywood. Calculation method for some mechanical properties |
| 04/30112438 DC : DRAFT APR 2004 | EN 622-5 - FIBREBOARDS - SPECIFICATIONS - PART 5: REQUIREMENTS FOR DRY PROCESS BOARDS (MDF) |
| I.S. EN 15534-1:2014 | COMPOSITES MADE FROM CELLULOSE-BASED MATERIALS AND THERMOPLASTICS (USUALLY CALLED WOOD-POLYMER COMPOSITES (WPC) OR NATURAL FIBRE COMPOSITES (NFC)) - PART 1: TEST METHODS FOR CHARACTERISATION OF COMPOUNDS AND PRODUCTS |
| 07/30160738 DC : 0 | BS EN 12369-3 - WOOD-BASED PANELS - CHARACTERISTIC VALUES FOR STRUCTURAL DESIGN - PART 3: SOLID-WOOD PANELS |
| BS EN 14272:2011 | Plywood. Calculation method for some mechanical properties |
| 11/30238453 DC : 0 | BS EN 1156 - WOOD-BASED PANELS - DETERMINATION OF DURATION OF LOAD AND CREEP FACTORS |
| DD CEN/TS 15534-3:2007 | Wood-plastics composites (WPC) Characterisation of WPC products |
| 01/103034 DC : DRAFT MAR 2001 | PREN 636-3 - PLYWOOD - SPECIFICATIONS - PART 3: REQUIREMENTS FOR PLYWOOD FOR USE IN EXTERIOR CONDITIONS |
| DD ENV 1156:1999 | Wood-based panels. Determination of duration of load and creep factors |
| PREN 15939 : DRAFT 2015 | HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF WALL ATTACHMENT |
| UNE-EN 14272:2012 | Plywood - Calculation method for some mechanical properties |
| DIN EN 13353:2011-07 | Solid wood panels (SWP) - Requirements (includes Amendment A1:2011) |
| DIN EN 12369-2:2011-09 | Wood-based panels - Characteristic values for structural design - Part 2: Plywood |
| DIN EN 622-4:2010-03 | FIBREBOARDS - SPECIFICATIONS - PART 4: REQUIREMENTS FOR SOFTBOARDS |
| BS EN 636 : 2012 | PLYWOOD - SPECIFICATIONS |
| BS EN 13986 : 2004 | WOOD-BASED PANELS FOR USE IN CONSTRUCTION - CHARACTERISTICS, EVALUATION OF CONFORMITY AND MARKING |
| BS EN 326-1:1994 | Wood-based panels. Sampling, cutting and inspection Sampling and cutting of test pieces and expression of test results |
| BS EN 13879:2002 | Wood-based panels. Determination of edgewise bending properties |
| BS EN 622-5:2009 | Fibreboards. Specifications Requirements for dry process boards (MDF) |
| BS EN 312-6:1997 | Particleboards. Specifications Requirements for heavy duty load-bearing boards for use in dry conditions |
| CEN/TS 15534-3:2007 | Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products |
| DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
| DIN EN 15939:2014-06 | HARDWARE FOR FURNITURE - STRENGTH AND LOADING CAPACITY OF WALL ATTACHMENT DEVICES |
| DIN EN 312:2010-12 | Particleboards - Specifications |
| EN 13377:2002 | Prefabricated timber formwork beams - Requirements, classification and assessment |
| EN 1328:1996 | Cement bonded particleboards - Determination of frost resistance |
| DIN EN 14279:2009-07 | LAMINATED VENEER LUMBER (LVL) - DEFINITIONS, CLASSIFICATION AND SPECIFICATIONS |
| DIN EN 14755:2006-01 | Extruded particleboards - Specifications |
| UNE-EN 13986:2006+A1:2015 | Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking |
| EN 326-1:1994 | Wood-based panels - Sampling, cutting and inspection - Part 1: Sampling and cutting of test pieces and expression of test results |
| EN 325:2012 | Wood-based panels - Determination of dimensions of test pieces |
Sorry this product is not available in your region.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.