EN 1253-2:2015
Current
The latest, up-to-date edition.
Gullies for buildings - Part 2: Roof drains and floor gullies without trap
21-01-2015
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Requirements
5 Test methods
6 Allocation and sequence of tests
7 Marking
8 Evaluation of conformity
Annex A (normative) - Sequence of the tests
Annex B (informative) - A-deviation
Bibliography
This European Standard classifies roof drains and floor gullies without trap for use inside buildings, gives guidance for places of installation and specifies requirements for the construction, design, performance and marking as well as test methods of factory made roof drains and floor gullies without trap (further: floor gullies) for buildings, irrespective of the material for use in drainage systems.Although normally used to convey rainwater and wastewater, these roof drains and floor gullies without trap may convey other wastewater provided there is no risk of damage to components or of injury to health.This European Standard does not apply to trapped floor gullies with a depth of water seal of at least 50 mm as specified in EN 1253 1.
| Committee |
CEN/TC 165
|
| DevelopmentNote |
Supersedes PREN 1253-2. (02/2015)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NF EN 1253-2 : 2015 | Identical |
| BS EN 1253-2:2015 | Identical |
| NEN EN 1253-2 : 2015 | Identical |
| NS EN 1253-2 : 2015 | Identical |
| I.S. EN 1253-2:2015 | Identical |
| DIN EN 1253-2:2015-03 | Identical |
| NBN EN 1253-2 : 2015 | Identical |
| UNE-EN 1253-2:2015 | Identical |
| UNI EN 1253-2 : 2004 | Identical |
| SN EN 1253-2 : 2015 | Identical |
| PN EN 1253-2 : 2015 | Identical |
| DIN EN 1253-1:2015-03 | GULLIES FOR BUILDINGS - PART 1: TRAPPED FLOOR GULLIES WITH A DEPTH WATER SEAL OF AT LEAST 50 MM |
| DIN EN 1253-3:2016-09 | GULLIES FOR BUILDINGS - PART 3: EVALUATION OF CONFORMITY |
| 10/30217319 DC : 0 | BS EN 13598-1 - PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| NF EN 13598-1 : 2011 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| I.S. EN 1253-3:2016 | GULLIES FOR BUILDINGS - PART 3: EVALUATION OF CONFORMITY |
| I.S. EN 1253-1:2015 | GULLIES FOR BUILDINGS - PART 1: TRAPPED FLOOR GULLIES WITH A DEPTH WATER SEAL OF AT LEAST 50 MM |
| I.S. EN 1253-4:2016 | GULLIES FOR BUILDINGS - PART 4: ACCESS COVERS |
| BS EN 1253-3:2016 | Gullies for buildings Evaluation of conformity |
| BS EN 13598-1:2010 | Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) Specifications for ancillary fittings including shallow inspection chambers |
| I.S. EN 13598-1:2010 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| UNI EN 13598-1 : 2011 | PLASTICS PIPING SYSTEMS FOR NON- PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VILYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| DIN 1986-3:2004-11 | Drainage systems on private ground - Part 3: Specifications for service and maintenance |
| DIN 18195-9:2010-05 | WATER-PROOFING OF BUILDINGS - PART 9: PENETRATIONS, TRANSITIONS, CONNECTIONS AND ENDINGS |
| UNE-EN 1253-3:2017 | Gullies for buildings - Part 3: Evaluation of conformity |
| UNE-EN 1253-4:2017 | Gullies for buildings - Part 4: Access covers |
| DIN EN 13598-1:2011-02 | PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U), POLYPROPYLENE (PP) AND POLYETHYLENE (PE) - PART 1: SPECIFICATIONS FOR ANCILLARY FITTINGS INCLUDING SHALLOW INSPECTION CHAMBERS |
| UNE-EN 13598-1:2011 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
| BS EN 1253-1:2015 | Gullies for buildings Trapped floor gullies with a depth water seal of at least 50 mm |
| BS EN 13564-2:2002 | Anti-flooding devices for buildings Test methods |
| BS EN 12056-2:2000 | Gravity drainage systems inside buildings Sanitary pipework, layout and calculation |
| EN 13598-1:2010 | Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers |
| EN 1253-3:2016 | Gullies for buildings - Part 3: Evaluation of conformity |
| DIN EN 1253-4:2016-07 | GULLIES FOR BUILDINGS - PART 4: ACCESS COVERS |
| BS EN 1253-4:2016 | Gullies for buildings Access covers |
| EN 13564-2:2002 | Anti-flooding devices for buildings - Part 2: Test methods |
| EN 1253-4:2016 | Gullies for buildings - Part 4: Access covers |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| EN 476:2011 | General requirements for components used in drains and sewers |
| EN 124:1994 | Gully tops and manhole tops for vehicular and pedestrian areas - Design requirements, type testing, marking, quality control |
| EN 1253-3:2016 | Gullies for buildings - Part 3: Evaluation of conformity |
| EN 1253-1:2015 | Gullies for buildings - Part 1: Trapped floor gullies with a depth water seal of at least 50 mm |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.