EN 1186-8:2002
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
Materials and articles in contact with foodstuffs - Plastics - Part 8: Test methods for overall migration into olive oil by article filling
17-10-2002
17-04-2002
Foreword
1 Scope
2 Normative references
3 Principle
4 Reagents
5 Apparatus
6 Preparation of test specimens
7 Procedure
8 Expression of results
9 Test report
Annex A (normative) Determination of the suitability of olive
oil as the fatty food simulant and of triheptadecanoin
as the internal standard
Annex B (normative) Determination of the need for sample
conditioning
Annex C (normative) Determination of the need for sample
conditioning and determination of the mass of moisture
sensitive test specimens, by vacuum drying
Annex D (normative) Determination of change in moisture content
of test specimens by measurement of the transfer of water
to, or from olive oil, by Karl Fischer titration
Annex E (informative) Typical chromatograms and calibration graph
Annex F (informative) Precision data
Annex ZA (informative) Relationship of this European Standard with
Council Directive 89/109/EEC and Commission Directive
90/128/EEC and associated Directives
Bibliography
This part of this European Prestandard describes a method of test for the determination of the overall migration from one surface only of plastics in the form of finished articles, which are intended to come into contact with a fatty foodstuff, by filling the finished article with olive oil and leaving for 10 days, 24 h or 2 h at 40 °C or for 2 h at 70 °C. Testing samples by this method enables testing of non-homogeneous articles providing that they are not too large. This method is most suitable for plastics in the form of containers and articles that can be filled.
| Committee |
CEN/TC 194
|
| DevelopmentNote |
Supersedes ENV 1186-8. (06/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Comite Europeen de Normalisation
|
| Status |
Withdrawn
|
| Supersedes |
| Standards | Relationship |
| BS EN 1186-8:2002 | Identical |
| NS EN 1186-8 : 1ED 2002 | Identical |
| I.S. EN 1186-8:2002 | Identical |
| PN EN 1186-8 : 2002 | Identical |
| NBN EN 1186-8 : 2002 | Identical |
| SN EN 1186-8 : 2002 | Identical |
| UNI EN 1186-8 : 2003 | Identical |
| DIN EN 1186-8:2002-07 | Identical |
| NEN EN 1186-8 : 2002 | Identical |
| NF EN 1186-8 : 2003 | Identical |
| UNE-EN 1186-8:2002 | Identical |
| ONORM EN 1186-8 : 2002 | Identical |
| I.S. EN 1186-12:2002 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - PLASTICS - PART 12: TEST METHODS FOR OVERALL MIGRATION AT LOW TEMPERATURES |
| I.S. CEN/TS 14235:2002 | MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS - POLYMERIC COATINGS ON METAL SUBSTRATES - GUIDE TO THE SELECTION OF CONDITIONS AND TEST METHODS FOR OVERALL MIGRATION |
| UNE-EN 438-1:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (Usually called Laminates) - Part 1: Introduction and general information |
| CEN/TS 14235:2002 | Materials and articles in contact with foodstuffs - Polymeric coatings on metal substrates - Guide to the selection of conditions and test methods for overall migration |
| EN 1186-12:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperatures |
| 17/30355230 DC : 0 | BS ISO 4586-1 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL, HPDL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 1: INTRODUCTION AND GENERAL INFORMATION |
| DD CEN/TS 14235:2002 | Materials and articles in contact with foodstuffs. Polymeric coatings on metal substrates. Guide to the selection of conditions and test methods for overall migration |
| I.S. EN 438-1:2016 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 1: INTRODUCTION AND GENERAL INFORMATION |
| DIN EN 1186-12:2002-07 | Materials and articles in contact with foodstuffs - Plastics - Part 12: Test methods for overall migration at low temperature |
| ISO 4586-1:2015 | High-pressure decorative laminates (HPL, HPDL) Sheets based on thermosetting resins (Usually called Laminates) Part 1: Introduction and general information |
| 14/30303782 DC : 0 | BS EN 438-1 - HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 1: INTRODUCTION AND GENERAL INFORMATION |
| PREN 438-1 : DRAFT 2014 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 1: INTRODUCTION AND GENERAL INFORMATION |
| CEN/TR 15623:2008 | Food processing machinery - Route map - Materials for food area |
| S.R. CEN TR 15623:2008 | FOOD PROCESSING MACHINERY - ROUTE MAP - MATERIALS FOR FOOD AREA |
| DIN EN 438-1:2016-06 | HIGH-PRESSURE DECORATIVE LAMINATES (HPL) - SHEETS BASED ON THERMOSETTING RESINS (USUALLY CALLED LAMINATES) - PART 1: INTRODUCTION AND GENERAL INFORMATION |
| EN 438-1:2016 | High-pressure decorative laminates (HPL) - Sheets based on thermosetting resins (usually called laminates) - Part 1: Introduction and general information |
| PD CEN/TR 15623:2008 | Food processing machinery. Route map. Materials for food area |
| BS EN 438-1:2016 | High-pressure decorative laminates (HPL). Sheets based on thermosetting resins (usually called laminates) Introduction and general information |
| BS EN 1186-12:2002 | Materials and articles in contact with foodstuffs. Plastics Test methods for overall migration at low temperatures |
| ISO 648:2008 | Laboratory glassware — Single-volume pipettes |
| ISO 4788:2005 | Laboratory glassware — Graduated measuring cylinders |
| EN 1186-1:2002 | Materials and articles in contact with foodstuffs - Plastics - Part 1: Guide to the selection of conditions and test methods for overall migration |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.