DIN EN 13561:2015-08
Current
The latest, up-to-date edition.
EXTERNAL BLINDS AND AWNINGS - PERFORMANCE REQUIREMENTS INCLUDING SAFETY
Hardcopy , PDF
German, English
01-08-2015
Important note : All end users must be registered with an Account prior to user licenses being assigned.
National foreword
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Product characteristics
5 Handling and storage
6 Information for use
7 Assessment and verification of constancy of
performance - AVCP
8 Marking
Annex A (normative) - Fabrics - Determination of the
elongation of external blinds fabrics under
a static load - Test method
Annex B (normative) - List of significant machine hazards
Annex C (informative) - Example of calculation for the wind
resistance determination on fixed parts of external
blinds in retracted position
Annex ZA (informative) - Clauses of this European Standard
addressing the provisions of EU Construction Products
Regulation
Annex ZB (informative) - Relationship between this European
Standard and the Essential Requirements of EU
Directive 2006/42/EC
Bibliography
Defines the performance requirements for blinds and awnings intended to be fitted externally to buildings and other construction works.
| Committee |
CEN/TC 33
|
| DevelopmentNote |
Supersedes DIN 18073. (05/2008)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 13561 : 2015 | Identical |
| NBN EN 13561 : 2015 COR 2016 | Identical |
| NEN EN 13561 : 2015 C1 2016 | Identical |
| NS EN 13561 : 2015 AC 2016 | Identical |
| I.S. EN 13561:2015 | Identical |
| UNE-EN 13561:2015 | Identical |
| SN EN 13561 : 2015 | Identical |
| UNI EN 13561 : 2009 | Identical |
| BS EN 13561:2015 | Identical |
| ISO 13934-1:2013 | Textiles — Tensile properties of fabrics — Part 1: Determination of maximum force and elongation at maximum force using the strip method |
| EN ISO 1421:2016 | Rubber- or plastics-coated fabrics - Determination of tensile strength and elongation at break (ISO 1421:2016) |
| EN 1932:2013 | External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria |
| ISO 11228-3:2007 | Ergonomics Manual handling Part 3: Handling of low loads at high frequency |
| EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
| EN 14202:2004 | Blinds and shutters - Suitability for use of tubular and square motorizations - Requirements and test methods |
| EN ISO 13934-1:2013 | Textiles - Tensile properties of fabrics - Part 1: Determination of maximum force and elongation at maximum force using the strip method (ISO 13934-1:2013) |
| EN ISO 105-B04:1997 | Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO 105-B04:1994) |
| EN 14201:2004 | Blinds and shutters - Resistance to repeated operations (mechanical endurance) - Methods of testing |
| EN 1523:1998 | Windows, doors, shutters and blinds - Bullet resistance - Test method |
| EN 14203:2004 | Blinds and shutters - Capability for use of gears with crank handle - Requirements and test methods |
| EN 14500:2008 | Blinds and shutters - Thermal and visual comfort - Test and calculation methods |
| ISO 105-B04:1994 | Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| EN 12194:2000 | Shutters, external and internal blinds - Misuse - Test methods |
| EN 13527:1999 | Shutters and blinds - Measurement of operating force - Test methods |
| IEC 60335-2-97:2016 | Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment |
| EN 13125:2001 | Shutters and blinds - Additional thermal resistance - Allocation of a class of air permeability to a product |
| EN 1933:1998 | Exterior blinds - Resistance to load due to water accumulation - Test method |
| EN 14501:2005 | Blinds and shutters - Thermal and visual comfort - Performance characteristics and classification |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
| EN 1522:1998 | Windows, doors, shutters and blinds - Bullet resistance - Requirements and classification |
| ISO 1421:2016 | Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break |
| EN 60335-1:2012/A13:2017 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
| IEC 61310-1:2007 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 20105-A02:1994 | Textiles - Tests for colour fastness - Part A02: Grey scale for assessing change in colour (ISO 105-A02:1993) |
| EN 60335-2-97:2006/A12:2015 | HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-97: PARTICULAR REQUIREMENTS FOR DRIVES FOR ROLLING SHUTTERS, AWNINGS, BLINDS AND SIMILAR EQUIPMENT |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
| ISO 10077-1:2017 | Thermal performance of windows, doors and shutters — Calculation of thermal transmittance — Part 1: General |
| EN 61310-1:2008 | Safety of machinery - Indication, marking and actuation - Part 1: Requirements for visual, acoustic and tactile signals |
| EN 12045:2000 | Shutters and blinds power operated - Safety in use - Measurement of the transmitted force |
| EN ISO 10077-1:2017 | Thermal performance of windows, doors and shutters - Calculation of thermal transmittance - Part 1: General (ISO 10077-1:2017, Corrected version 2020-02) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.