DIN EN 13206:2017-05
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLASTICS - THERMOPLASTIC COVERING FILMS FOR USE IN AGRICULTURE AND HORTICULTURE
Hardcopy , PDF
07-03-2021
01-01-2017
National foreword
National Annex NA (informative) - Bibliography
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Types and use
5 Material
6 Durability
7 Requirements
8 Test methods
9 Film acceptance, storage and handling
10 Designation
11 Marking
12 Instructions for installation, use of
covering films
13 Instructions for disposal and end-of-life
of covering films
Annex A (informative) - Exposure to other light sources
Annex B (informative) - Empirical correlation between
durations of covering films exposed to artificial
weathering and a natural exposure
Annex C (normative) - Determination of the
chlorine content by coulometry
Annex D (normative) - Determination of the sulfur
content by ICP- OES technique
Annex E (informative) - Alternative method for
the determination of chlorine and sulfur
contents by X-ray fluorescence
Annex F (informative) - Alternative methods for
the determination of sulfur content by
ultraviolet fluorescence method or by coulometry
Annex G (informative) - Guidance for installation,
use and disposal of covering films
Annex H (informative) - Industrial standard
formats of films
Bibliography
Defines the requirements related to dimensional, mechanical, optical and thermal characteristics of thermoplastic films used for covering permanent or temporary greenhouses and walking tunnels and low tunnels used for forcing and semi-forcing vegetable, fruit and flower crops.
DocumentType |
Standard
|
Pages |
56
|
PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
SN EN 13206 : 2017 | Identical |
NBN EN 13206 : 2001 | Identical |
UNE-EN 13206:2017 | Identical |
I.S. EN 13206:2017 | Identical |
NEN EN 13206 : 2017 | Identical |
NS EN 13206 : 2017 | Identical |
BS EN 13206:2017 | Identical |
UNI EN 13206 : 2002 | Identical |
EN 13206:2017 | Identical |
NF EN 13206 : 2017 | Identical |
ISO 15270:2008 | Plastics — Guidelines for the recovery and recycling of plastics waste |
ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
UNE 53087-2:2005 | Plastics and rubber. Determination of chlorine content. Part 2: Method of coulombimetry |
EN 15345:2007 | Plastics - Recycled Plastics - Characterisation of Polypropylene (PP) recyclates |
EN ISO 4892-3:2016 | Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
EN 10244-2:2009 | Steel wire and wire products - Non-ferrous metallic coatings on steel wire - Part 2: Zinc or zinc alloy coatings |
EN 15343:2007 | Plastics - Recycled Plastics - Plastics recycling traceability and assessment of conformity and recycled content |
EN 13031-1:2001 | Greenhouses - Design and construction - Part 1: Commercial production greenhouses |
EN ISO 7765-1:2004 | Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988) |
ISO 7765-1:1988 | Plastics film and sheeting Determination of impact resistance by the free-falling dart method Part 1: Staircase methods |
EN ISO 527-1:2012 | Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
ISO 4591:1992 | Plastics — Film and sheeting — Determination of average thickness of a sample, and average thickness and yield of a roll, by gravimetric techniques (gravimetric thickness) |
ISO/TR 19032:2006 | Plastics Use of polyethylene reference specimens (PERS) for monitoring laboratory and outdoor weathering conditions |
ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
ASTM D 1003 : 2013 : REDLINE | Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics |
EN 15347:2007 | Plastics - Recycled Plastics - Characterisation of plastics wastes |
EN 16472:2014 | Plastics - Method for artificial accelerated photoageing using medium pressure mercury vapour lamps |
DIN EN ISO 4892-1:2001-09 | PLASTICS - METHODS OF EXPOSURE TO LABORATORY LIGHT SOURCES - PART 1: GENERAL GUIDANCE (ISO 4892-1:2016) |
ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
EN 15344:2007 | Plastics - Recycled Plastics - Characterisation of Polyethylene (PE) recyclates |
ISO 9370:2017 | Plastics — Instrumental determination of radiant exposure in weathering tests — General guidance and basic test method |
ISO 10640:2011 | Plastics Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy |
ISO 527-3:1995 | Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
ISO 4592:1992 | Plastics — Film and sheeting — Determination of length and width |
EN ISO 4892-2:2013 | Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
ISO 527-1:2012 | Plastics Determination of tensile properties Part 1: General principles |
ISO 4593:1993 | Plastics Film and sheeting Determination of thickness by mechanical scanning |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.