DIN EN 12828:2014-07
Current
Current
The latest, up-to-date edition.
HEATING SYSTEMS IN BUILDINGS - DESIGN FOR WATER-BASED HEATING SYSTEMS
Available format(s)
Hardcopy , PDF
Language(s)
German
Published date
01-01-2014
National foreword
National Annex NA (informative) - Bibliography
Foreword
Introduction
1 Scope
2 Normative references
3 Terms, definitions and symbols
4 System design requirements
5 Instructions for operation, maintenance and use
6 Installation and commissioning
Annex A (informative) - Control system classification
Annex B (informative) - Thermal Environment
Annex C (informative) - Thermal insulation
Annex D (informative) - Guidance for dimensioning
diaphragm expansion vessels and pressurization
systems (sealed systems)
Annex E (informative) - Safety valves for heating systems
Annex F (informative) - A-deviations
Bibliography
This standard is included in DIN Handbook 130.
| DevelopmentNote |
Supersedes DIN 4751-1, -2 and -3. (06/2003) Supersedes DIN 4807-2. (07/2011)
|
| DocumentType |
Standard
|
| Pages |
58
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNE-EN 12828:2003 | Identical |
| SN EN 12828 : 2012 + A1 2014 | Identical |
| NF EN 12828 : 2013 + A1 2014 | Identical |
| UNI EN 12828 : 2014 | Identical |
| I.S. EN 12828:2012 | Identical |
| NS EN 12828 : 2012 + A1 2014 | Identical |
| BS EN 12828 : 2012 | Identical |
| NEN EN 12828 : 2012 + A1 2014 | Identical |
| EN 12828:2012+A1:2014 | Identical |
| NBN EN 12828 : 2013 + A1 2014 | Identical |
| DIN HDBK 130 : 7ED 2016 | |
| VDI 2067 Blatt 1:2012-09 | Economic efficiency of building installations - Fundamentals and economic calculation |
| VDI 6030 Blatt 1:2002-07 | Designing free heating surfaces - Fundamentals - Designing of heating appliances |
| VDI 6002 Blatt 2:2014-03 | Solar heating for potable water - Application in students accomodations, senior citizens\' residences, hospitals, swimming baths and camping sites |
| VDI 2073-1 : 2014 COR 1 2014 | HYDRAULIC SYSTEMS IN BUILDING SERVICES - HYDRAULIC CIRCUITS |
| VDI 3811:2016-07 | Refurbishment of heating installations |
| VDI 3809 Blatt 1:2011-09 | Acceptance of building installations - Heating |
| VDI 4708 Blatt 1:2012-07 | Pressure maintenance, venting, deaeration - Pressure maintenance |
| VDI 6028 Blatt 1.1:2013-11 | Assessment criteria for Building Services - Technical quality for sustainable buildings |
| VDI 2715:2011-11 | Noise control in heating systems |
| VDI 2035 Blatt 2:2009-08 | Prevention of damage in water heating installations - Water-side corrosion |
| VDI 3805 Blatt 2:2016-01 | Product data exchange in the building services - Heating value assemblies |
| VDI 6002 Blatt 1:2014-03 | Solar heating for potable water - Basic principles - System technology and application in residential buildings |
| DIN 1988-200:2012-05 | Codes of practice for drinking water installations - Part 200: Installation Type A (closed system) - Planning, components, apparatus, materials; DVGW code of practice |
| DIN HDBK 493 : 1ED 2014 |
| EN 1264-4:2009 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| EN 442-3:2003 | Radiators and convectors - Part 3: Evaluation of conformity |
| EN 1264-3:2009 | Water based surface embedded heating and cooling systems - Part 3: Dimensioning |
| DIN EN 12831 Beiblatt 2:2012-05 | HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD - SUPPLEMENT 2: SIMPLIFIED METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD AND THE HEAT GENERATOR CAPACITY |
| EN 1503-4:2016 | Valves - Materials for bodies, bonnets and covers - Part 4: Copper alloys specified in European Standards |
| EN 215 : 2004 AMD 1 2006 | THERMOSTATIC RADIATOR VALVES - REQUIREMENTS AND TEST METHODS |
| EN 442-1:2014 | Radiators and convectors - Part 1: Technical specifications and requirements |
| ISO 4126-1:2013 | Safety devices for protection against excessive pressure — Part 1: Safety valves |
| EN 12953-6:2011 | Shell Boilers - Part 6: Requirements for equipment for the boiler |
| EN 1264-5:2008 | Water based surface embedded heating and cooling systems - Part 5: Heating and cooling surfaces embedded in floors, ceilings and walls - Determination of the thermal output |
| ISO 13732-1:2006 | Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
| EN 60730-2-9:2010 | Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls |
| EN 1503-2:2000 | Valves - Materials for bodies, bonnets and covers - Part 2: Steels other than those specified in European Standards |
| VDI 4708 Blatt 1:2012-07 | Pressure maintenance, venting, deaeration - Pressure maintenance |
| ISO 15927-5:2004 | Hygrothermal performance of buildings Calculation and presentation of climatic data Part 5: Data for design heat load for space heating |
| EN 1503-1:2000 | Valves - Materials for bodies, bonnets and covers - Part 1: Steels specified in European Standards |
| ISO 7726:1998 | Ergonomics of the thermal environment — Instruments for measuring physical quantities |
| EN 15316-1:2017 | Energy performance of buildings - Method for calculation of system energy requirements and system efficiencies - Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 |
| EN ISO 13732-1:2008 | Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
| VDI 2035 Blatt 2:2009-08 | Prevention of damage in water heating installations - Water-side corrosion |
| EN ISO 7726:2001 | Ergonomics of the thermal environment - Instruments for measuring physical quantities (ISO 7726:1998) |
| EN ISO 8044:2015 | Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) |
| EN ISO 7730:2005 | Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2005) |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| ISO 12241:2008 | Thermal insulation for building equipment and industrial installations Calculation rules |
| EN 12170:2002 | Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems requiring a trained operator |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN ISO 12241:2008 | Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008) |
| ISO 7730:2005 | Ergonomics of the thermal environment — Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria |
| EN 1264-2:2008+A1:2012 | Water based surface embedded heating and cooling systems - Part 2: Floor heating: Prove methods for the determination of the thermal output using calculation and test methods |
| EN 442-2:2014 | Radiators and convectors - Part 2: Test methods and rating |
| EN 1264-1:2011 | Water based surface embedded heating and cooling systems - Part 1: Definitions and symbols |
| EN 12171:2002 | Heating systems in buildings - Procedure for the preparation of documents for operation, maintenance and use - Heating systems not requiring a trained operator |
| EN 10226-1:2004 | Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation |
| EN 14336:2004 | Heating systems in buildings - Installation and commissioning of water based heating systems |
| EN 12831:2003 | Heating systems in buildings - Method for calculation of the design heat load |
| EN 15500:2008 | Control for heating, ventilating and air-conditioning applications - Electronic individual zone control equipment |
| EN 12098-1:2017 | Energy Performance of Buildings - Controls for heating systems - Part 1: Control equipment for hot water heating systems - Modules M3-5, 6, 7, 8 |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.