DIN 4108-2:2013-02
Current
The latest, up-to-date edition.
THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 2: MINIMUM REQUIREMENTS TO THERMAL INSULATION
Hardcopy , PDF
German
01-01-2013
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe, Symbole, Einheiten und Indizes
3.1 Begriffe
3.2 Symbole, Grössen und Einheiten
3.3 Indizes
4 Grundlagen des Mindestwärmeschutzes
4.1 Allgemeines
4.2 Wärmeschutz im Winter
4.2.1 Wärmeschutztechnische Massnahmen bei der Planung
von Gebäuden
4.2.2 Massnahmen zum Tauwasser- und Schlagregenschutz
4.2.3 Hinweise zur Luftdichtheit von Aussenbauteilen
und zum Mindestluftwechsel
4.3 Wärmeschutz im Sommer
4.3.1 Allgemeines
4.3.2 Wärmeschutztechnische Massnahmen bei der Planung
von Gebäuden
4.3.3 Sonneneintragskennwerte von Aussenbauteilen mit
transparenten Flächen
4.3.4 Solarenergiegewinnende Aussenbauteile
4.3.5 Freie Lüftung
5 Mindestanforderungen an den Wärmeschutz
wärmeübertragender Bauteile
5.1 Wärmedurchlasswiderstand und
Wärmedurchgangskoeffizient der Bauteile
5.2 Mindestwerte der Wärmedurchlasswiderstände
nichttransparenter Bauteile
5.2.1 Anforderungen an ein- und mehrschichtige
Massivbauteile
5.2.2 Anforderungen an leichte Bauteile,
Rahmen- und Skelettbauarten
5.2.3 Anforderungen für Gebäude mit niedrigen
Innentemperaturen
5.2.4 Anforderungen an Bauteile mit Wärmebrücken
5.3 Randbedingungen für die Berechnung
5.3.1 Wände
5.3.2 Aussenschale bei Bauteilen mit Luftschicht
5.3.3 Bauteile mit Abdichtungen
5.3.4 Oberste Geschossdecken
5.3.5 Fussböden und Bodenplatten
5.3.6 Fenster, Fenstertüren und Türen
5.3.7 Rollladenkästen
5.3.8 Fassaden aus Pfosten-Riegel-Konstruktionen
6 Mindestanforderungen an den Wärmeschutz im Bereich von
Wärmebrücken
6.1 Vermeidung extrem niedriger
Innenoberflächen-Temperaturen
6.2 Massnahmen zur Vermeidung von Schimmelpilzbildung
6.3 Vermeidung erhöhter Transmissionswärmeverluste
7 Anforderungen an die Luftdichtheit von Aussenbauteilen
8 Mindestanforderung an den sommerlichen Wärmeschutz
8.1 Allgemeines
8.2 Bereiche der Anwendung
8.3 Bedingung des sommerlichen Wärmeschutznachweises
8.4 Randbedingungen
8.5 Bestimmung des Sonneneintragkennwertes
8.6 Anforderungen
Anhang A (informativ) Gegenüberstellung von Symbolen
physikalischer Grösse
Literaturhinweise
This standard is included in DIN Handbook 158/1 and 110.
| DevelopmentNote |
Supersedes DIN 4108. (01/2005)
|
| DocumentType |
Standard
|
| Pages |
34
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Current
|
| 10/30196970 DC : 0 | BS ISO 16000-19 - INDOOR AIR - PART 19: SAMPLING STRATEGY FOR MOULDS |
| DIN HDBK 158/1 : 10ED 2014 | |
| BS ISO 16000-19 : 2012 | INDOOR AIR - PART 19: SAMPLING STRATEGY FOR MOULDS |
| VDI 6011 Blatt 2:2006-04 | Optimization of daylighting and artificial lighting - Rooflights |
| UNE-EN ISO 16000-19:2015 | Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012) |
| DIN 18516-1:2010-06 | Cladding for external walls, ventilated at rear - Part 1: Requirements, principles of testing |
| DIN 18195-10:2011-12 | WATER-PROOFING OF BUILDINGS - PART 10: PROTECTIVE LAYERS AND PROTECTIVE MEASURES |
| DIN 4701-2:1983-03 | RULES FOR CALCULATING THE HEAT REQUIREMENT OF BUILDINGS; TABLES, PICTURES, ALGORITHMS |
| DIN 18160-1:2001-12 | CHIMNEYS - PART 1: DESIGN AND PERFORMANCE |
| DIN EN ISO 16000-19:2014-12 | Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012) |
| ISO 16000-19:2012 | Indoor air — Part 19: Sampling strategy for moulds |
| DIN 4108-3:1981-08 | HEAT INSULATION IN BUILDINGS - PROTECTION AGAINST MOISTURE CAUSED BY THE CLIMATE - REQUIREMENTS AND DIRECTIONS FOR PLANNING AND CONSTRUCTION |
| DIN 4108-2:1981-08 | HEAT INSULATION IN BUILDINGS - HEAT INSULATION AND HEAT STORAGE - REQUIREMENTS AND DIRECTIONS FOR PLANNING AND CONSTRUCTION |
| DIN 4108-4:1991-11 | THERMAL INSULATION IN BUILDINGS; CHARACTERISTIC VALUES RELATING TO THERMAL INSULATION AND PROTECTION AGAINST MOISTURE |
| DIN 4108-5:1981-08 | HEAT INSULATION IN BUILDINGS; CALCULATION METHODS |
| VDI 2055 Blatt 1:2008-09 | Thermal insulation of heated and refrigerated operational installations in the industry and the building services - Calculation rules |
| VDI 3813 Blatt 2:2011-05 | Building automation and control systems (BACS) - Room control functions (RA functions) |
| VDI 2078:2015-06 | Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
| DIN 4701-1:1983-03 | RULES FOR CALCULATING THE HEAT REQUIREMENT OF BUILDINGS; BASIC RULES FOR CALCULATION |
| DIN HDBK 158 : 8ED 2004 | |
| I.S. EN ISO 16000-19:2014 | INDOOR AIR - PART 19: SAMPLING STRATEGY FOR MOULDS (ISO 16000-19:2012) |
| DIN 4108-1:1981-08 | THERMAL INSULATION IN BUILDINGS - QUANTITIES AND UNITS |
| DIN 1045 : 1988 AMD 1 1996 | STRUCTURAL USE OF CONCRETE - DESIGN AND CONSTRUCTION |
| DIN 4108-3:2014-11 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 3: PROTECTION AGAINST MOISTURE SUBJECT TO CLIMATE CONDITIONS - REQUIREMENTS AND DIRECTIONS FOR DESIGN AND CONSTRUCTION |
| DIN 4108 Beiblatt 2:2006-03 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - THERMAL BRIDGES - EXAMPLES FOR PLANNING AND PERFORMANCE |
| EN ISO 16000-19:2014 | Indoor air - Part 19: Sampling strategy for moulds (ISO 16000-19:2012) |
| DIN HDBK 90 : 9ED 2013 | DAEMM- UND BRANDSCHUTZARBEITEN AN TECHNISCHEN ANLAGEN VOB/STLB-BAU - VOB TEIL B: DIN 1961; VOB TEIL C: ATV DIN 18299, ATV DIN 18421 |
| DIN HDBK 110 : 12ED 2016 | |
| DIN 18017-1:1987-02 | VENTILATION OF BATHROOMS AND WCS WITHOUT OUTSIDE WINDOWS - SINGLE SHAFT SYSTEMS WITHOUT VENTILATORS |
| UNI EN ISO 16000-19 : 2014 | INDOOR AIR - PART 19: SAMPLING STRATEGY FOR MOULDS |
| BS EN ISO 16000-19:2014 | Indoor air Sampling strategy for moulds |
| DIN ISO 16000-19:2012-12 | INDOOR AIR - PART 19: SAMPLING STRATEGY FOR MOULDS (ISO 16000-19:2012) |
| DIN HDBK 310 : 2ED 2001 | BAUPHYSIK 2 - NORMEN FUER DAS STUDIUM - FEUCHTESCHUTZ, LUEFTUNG, WAERMEBEDARFSERMITTLUNG, WAERMESCHUTZ |
| DIN 18540:2014-09 | SEALING OF EXTERIOR WALL JOINTS IN BUILDING USING JOINT SEALANTS |
| DIN 1053-1:1996-11 | MASONRY - PART 1: DESIGN AND CONSTRUCTION |
| DIN EN 13170:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
| DIN EN ISO 13789:2015-06 (Draft) | THERMAL PERFORMANCE OF BUILDINGS - TRANSMISSION AND VENTILATION HEAT TRANSFER COEFFICIENTS - CALCULATION METHOD (ISO 13789:2017) |
| DIN V 18599-2:2016-10 | ENERGY EFFICIENCY OF BUILDINGS - CALCULATION OF THE NET, FINAL AND PRIMARY ENERGY DEMAND FOR HEATING, COOLING, VENTILATION, DOMESTIC HOT WATER AND LIGHTING - PART 2: NET ENERGY DEMAND FOR HEATING AND COOLING OF BUILDING ZONES |
| DIN 4108-10:2015-12 | Thermal insulation and energy economy in buildings - Part 10: Application-related requirements for thermal insulation materials - Factory made products |
| DIN EN ISO 7345:1996-01 | THERMAL INSULATION - PHYSICAL QUANTITIES AND DEFINITIONS |
| DIN EN ISO 10211:2015-06 (Draft) | THERMAL BRIDGES IN BUILDING CONSTRUCTION - HEAT FLOWS AND SURFACE TEMPERATURES - DETAILED CALCULATIONS (ISO 10211:2017) |
| DIN-Fachbericht 4108-8:2010-09 | Thermal insulation and energy economy in buildings - Part 8: Avoidance of mould growth in residential buildings |
| DIN 4108 Beiblatt 2:2006-03 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - THERMAL BRIDGES - EXAMPLES FOR PLANNING AND PERFORMANCE |
| EN ISO 6946:2017 | Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12) |
| DIN V 4108-4:2007-06 | THERMAL INSULATION AND ENERGY ECONOMY IN BUILDINGS - PART 4: HYGROTHERMAL DESIGN VALUES |
| DIN EN ISO 6946:2015-06 (Draft) | BUILDING COMPONENTS AND BUILDING ELEMENTS - THERMAL RESISTANCE AND THERMAL TRANSMITTANCE - CALCULATION METHODS (ISO 6946:2017) |
| DIN EN 13164:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
| DIN 4108-7:2011-01 | Thermal insulation and energy economy in buildings - Part 7: Air tightness of buildings - Requirements, recommendations and examples for planning and performance |
| DIN EN ISO 13786:2015-06 (Draft) | THERMAL PERFORMANCE OF BUILDING COMPONENTS - DYNAMIC THERMAL CHARACTERISTICS - CALCULATION METHODS (ISO 13786:2017) |
| DIN EN ISO 10456:2010-05 | Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009); German version EN ISO 10456:2007 + AC:2009 |
| DIN EN 13167:2015-04 | THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
| DIN EN ISO 13788:2013-05 | Hygrothermal performance of building components and building elements - Internal surface temperature to avoid critical surface humidity and interstitial condensation - Calculation methods (ISO 13788:2012) |
| DIN EN ISO 10077-2:2015-08 (Draft) | THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 2: NUMERICAL METHOD FOR FRAMES (ISO 10077-2:2017) |
| ISO 6946:2017 | Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods |
| DIN EN ISO 10077-1:2016-10 (Draft) | THERMAL PERFORMANCE OF WINDOWS, DOORS AND SHUTTERS - CALCULATION OF THERMAL TRANSMITTANCE - PART 1: GENERAL (ISO 10077-1:2017) |
| DIN EN 1264-4:2009-11 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| DIN EN 12207:2015-01 (Draft) | WINDOWS AND DOORS - AIR PERMEABILITY - CLASSIFICATION |
| DIN EN 410:2011-04 | Glass in building - Determination of luminous and solar characteristics of glazing |
| DIN 4108-3:2014-11 | THERMAL PROTECTION AND ENERGY ECONOMY IN BUILDINGS - PART 3: PROTECTION AGAINST MOISTURE SUBJECT TO CLIMATE CONDITIONS - REQUIREMENTS AND DIRECTIONS FOR DESIGN AND CONSTRUCTION |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.