DIN 19643-1:2012-11
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Treatment of water of swimming pools and baths - Part 1: General requirements
Available format(s)
Hardcopy , PDF
Withdrawn date
02-06-2023
Superseded by
Language(s)
German, English
Published date
01-11-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
1. Scope
2. Normative references
3. General
4. Concepts
5. Water quality requirements
6. Design and structural requirements
7. Requirements for baths and pools
8. Rated pollution load and flow
9. Hydraulic system
10. Water treatment system
11. Disinfection
12. Combined methods for water treatment
13. Operation of bathing facilities
14. Monitoring water quality during operation
15. Acceptance
This standard is included in DIN Handbook 12, 12/1 and 477.
| DevelopmentNote |
Supersedes DIN V 19644 and DIN 19643. (11/1999)
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
German Institute for Standardisation (Deutsches Institut für Normung)
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| DIN HDBK 12 : 11ED 2006 | WATER SUPPLY 1 - STANDARDS ON WATER EXTRACTION AND TREATMENT |
| DIN HDBK 12/1 : 12ED 2015 | WASSERVERSORGUNG 1 - WASSERGEWINNUNG, WASSERUNTERSUCHUNG, WASSERAUFBEREITUNG (VERFAHREN), TRINKWASSERBEHANDLUNG |
| DIN 19643-2:2012-11 | Treatment of water of swimming pools and baths - Part 2: Combinations of process with fixed bed filters and precoat filters |
| DIN 19606:2010-09 | CHLORINATORS FOR WATER TREATMENT - EQUIPMENT, INSTALLATION AND OPERATION |
| DIN 19643-3:2012-11 | Treatment of water of swimming pools and baths - Part 3: Combinations of process with ozonization |
| VDI 4250 Blatt 2:2015-11 | Bioaerosols and biological agents - Environmental health assessment of bioaerosols in ambient air - Risk assessment for aerosols containing Legionella |
| VDI 2089 Blatt 1:2010-01 | Building Services in swimming baths - Indoor pools |
| DIN HDBK 477 : 3ED 2015 | |
| VDMA 24658 : DRAFT 2015 | WATER TREATMENT AND WASTE WATER TREATMENT - PROCESS AUTOMATION TO INCREASE OPERATIONAL EFFICIENCY AND RELIABILITY - ADVICE FOR PLANNING, ENGINEERING AND EXECUTION PHASES |
| DIN 19643-4:2012-11 | Treatment of water of swimming pools and baths - Part 4: Combinations of process with ultrafiltration |
| DIN EN 10216-1:2014-03 | SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN EN 10217-1:2005-04 | WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 1: NON-ALLOY STEEL TUBES WITH SPECIFIED ROOM TEMPERATURE PROPERTIES |
| DIN 19643-3:2012-11 | Treatment of water of swimming pools and baths - Part 3: Combinations of process with ozonization |
| DIN EN 15288-1:2010-12 | SWIMMING POOLS - PART 1: SAFETY REQUIREMENTS FOR DESIGN |
| DIN EN 15078:2013-08 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - SULFURIC ACID |
| DVGW W 616 : 2011 | SENSORGESTUETZTE BETRIEBSUEBERWACHUNG VON PUMPENSYSTEMEN IN DER TRINKWASSERVERSORGUNG |
| DIN EN ISO 10301:1997-08 | WATER QUALITY - DETERMINATION OF HIGHLY VOLATILE HALOGENATED HYDROCARBONS - GAS-CHROMATOGRAPHIC METHODS |
| DIN EN ISO 1452-1:2010-04 | Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure - Unplasticized poly(vinyl chloride) (PVC-U) - Part 1: General (ISO 1452-1:2009) |
| DIN EN 12201-1:2011-11 | Plastics piping systems for water supply, and for drainage and sewerage under pressure - Polyethylene (PE) - Part 1: General |
| DIN 38405-9:2011-09 | German standard methods for examination of water, waste water and sludge - Anions (group D) - Part 9: Spectrometric determination of nitrate (D 9) |
| DVGW W 270 : 2007 | MICROBIAL ENHANCEMENT ON MATERIALS TO COME INTO CONTACT WITH DRINKING WATER - TESTING AND ASSESSMENT |
| DIN 19643-2:2012-11 | Treatment of water of swimming pools and baths - Part 2: Combinations of process with fixed bed filters and precoat filters |
| DIN EN ISO 15877-1:2011-03 | Plastics piping systems for hot and cold water installations - Chlorinated poly(vinyl chloride) (PVC-C) - Part 1: General (ISO 15877-1:2009 + AMD 1:2010) |
| DIN EN 15077:2013-08 | Chemicals used for treatment of swimming pool water - Sodium hypochlorite |
| EN 10088-3:2014 | Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes |
| DIN 30675-1:1992-09 | EXTERNAL CORROSION PROTECTION OF BURIED PIPES - CORROSION PROTECTION SYSTEMS FOR STEEL PIPES |
| DIN EN ISO 9308-1:2014-12 | WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD FOR WATERS WITH LOW BACTERIAL BACKGROUND FLORA (ISO 9308-1:2014 + AMD 1:2016) |
| DIN 19606:2010-09 | CHLORINATORS FOR WATER TREATMENT - EQUIPMENT, INSTALLATION AND OPERATION |
| DIN EN 15362:2014-08 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - SODIUM CARBONATE |
| DIN 19605:2016-05 | FIXED BED FILTERS FOR WATER TREATMENT - STRUCTURE AND COMPONENTS |
| DIN 60000:1969-01 | TEXTILES - BASIC TERMS AND DEFINITIONS |
| DIN EN ISO 17294-2:2005-02 | WATER QUALITY - APPLICATION OF INDUCTIVELY COUPLED PLASMA MASS SPECTROMETRY (ICP-MS) - PART 2: DETERMINATION OF SELECTED ELEMENTS INCLUDING URANIUM ISOTOPES (ISO 17294-2:2016) |
| DIN EN 14879-1:2005-12 | Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 1: Terminology, design and preparation of substrate |
| DIN EN 13451-1:2011-11 | SWIMMING POOL EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 15874-1:2013-06 | Plastics piping systems for hot and cold water installations - Polypropylene (PP) - Part 1: General (ISO 15874-1:2013); German and English version EN ISO 15874-1:2013 |
| BGR 108 : 2011 | |
| DIN EN 13451-3:2016-06 | Swimming pool equipment - Part 3: Additional specific safety requirements and test methods for inlets and outlets and water/air based water leisure features (includes Amendment A3:2016) |
| DIN EN 16038:2012-09 | CHEMICALS USED FOR TREATMENT OF WATER FOR SWIMMING POOLS - SODIUM HYDROGEN SULFATE |
| DGFDB 65.03 : 2015 | |
| DIN EN ISO 17994:2014-06 | WATER QUALITY - REQUIREMENTS FOR THE COMPARISON OF THE RELATIVE RECOVERY OF MICROORGANISMS BY TWO QUANTITATIVE METHODS (ISO 17994:2014) |
| DIN EN 10253-2:2008-09 | Butt-welding pipe fittings - Part 2: Non alloy and ferritic alloy steels with specific inspection requirements |
| DIN EN 10208-1:2009-07 | STEEL PIPES FOR PIPELINES FOR COMBUSTIBLE FLUIDS - TECHNICAL DELIVERY CONDITIONS - PART 1: PIPES OF REQUIREMENT CLASS A |
| TRGS 510 : 2013 COR 2015 | STORAGE OF HAZARDOUS SUBSTANCES IN NON-STATIONARY CONTAINERS |
| DIN 38407-30:2007-12 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - JOINTLY DETERMINABLE SUBSTANCES (GROUP F) - PART 30: DETERMINATION OF TRIHALOGENMETHANES IN BATHING WATER AND POOL WATER WITH HEADSPACE-GAS CHROMATOGRAPHY (F 30) |
| DIN 19643-4:2012-11 | Treatment of water of swimming pools and baths - Part 4: Combinations of process with ultrafiltration |
| DGFDB 65.04 : 2011 | FUNKTIONSPRUEFUNG VON ANLAGEN ZUR AUFBEREITUNG VON SCHWIMM- UND BADEBECKENWASSER NACH DIN 19643: 1997-04 UND ULTRAFILTRATIONSANLAGEN |
| DIN 1988-100:2011-08 | Codes of practice for drinking water installations - Part 100: Protection of drinking water, drinking water quality control; DVGW code of practice |
| DIN EN ISO 11206:2013-05 | Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011); German version EN ISO 11206:2013 |
| DIN 38404-5:2009-07 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - PHYSICAL AND PHYSICO-CHEMICAL CHARACTERISTICS (GROUP C) - PART 5: DETERMINATION OF PH VALUE (C 5) |
| ISO 11731:2017 | Water quality — Enumeration of Legionella |
| DIN EN 12954:2001-04 | CATHODIC PROTECTION OF BURIED OR IMMERSED METALLIC STRUCTURES - GENERAL PRINCIPLES AND APPLICATION FOR PIPELINES |
| DVGW W 213-5 : 2013 | FILTRATIONSVERFAHREN ZUR PARTIKELENTFERNUNG - TEIL 5: MEMBRANFILTRATION |
| DGFDB 65.01 : 2013 | PH-WERT-EINSTELLUNG BEI ANLAGEN ZUR AUFBEREITUNG VON SCHWIMM- UND BADEBECKENWASSER |
| DIN EN 15514:2014-08 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - HYDROCHLORIC ACID |
| DIN 1045-3:2012-03 | Concrete, reinforced and prestressed concrete structures - Part 3: Execution of structures - Application rules for DIN EN 13670 |
| DIN 38405-35:2004-09 | METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE - ANIONS (GROUP D) - PART 35: DETERMINATION OF ARSENIC - METHOD BY GRAPHITE FURNACE ATOMIC ABSORPTION SPECTROMETRY (GF-AAS) (D 35) |
| DGFDB 65.08 : 2014 | MOEGLICHKEITEN DES TEILLASTBETRIEBS DER AUFBEREITUNGSANLAGEN VON SCHWIMM- UND BADEBECKENWASSER |
| DIN 1045-4:2012-02 | Concrete, reinforced and prestressed concrete structures - Part 4: Additional rules for the production and the conformity of prefabricated elements |
| DIN EN ISO 7027:2000-04 | WATER QUALITY - DETERMINATION OF TURBIDITY |
| DIN EN 15796:2010-05 | Chemicals used for treatment of swimming pool water - Calcium hypochlorite |
| DIN 38404-6:1984-05 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; PHYSICAL AND PHYSICO-CHEMICAL PARAMETERS (GROUP C); DETERMINATION OF THE OXIDATION REDUCTION (REDOX) POTENTIAL (C 6) |
| DIN 1045-2:2008-08 | Concrete, reinforced and prestressed concrete structures - Part 2: Concrete - Specification, performance, production and conformity - Application rules for DIN EN 206-1 |
| DIN EN ISO 5667-3:2013-03 | WATER QUALITY - SAMPLING - PART 3: PRESERVATION AND HANDLING OF WATER SAMPLES (ISO 5667-3:2012) |
| DIN EN 15513:2014-06 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - CARBON DIOXIDE |
| DGFDB 60.03 : 2016 | VERMEIDUNG VON GEFAHREN AN ANSAUG-, ABLAUF- UND ZULAUFANLAGEN IN SCHWIMM- UND BADEBECKEN |
| DIN EN 15076:2013-08 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - SODIUM HYDROXIDE |
| DIN EN 15288-2:2009-05 | SWIMMING POOLS - PART 2: SAFETY REQUIREMENTS FOR OPERATION |
| DGFDB 65.06 : 2016 | |
| DIN EN ISO 12944-4:2016-07 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 4: TYPES OF SURFACE AND SURFACE PREPARATION (ISO 12944-4:2017) |
| DIN EN 10253-4:2008-06 | BUTT-WELDING PIPE FITTINGS - PART 4: WROUGHT AUSTENITIC AND AUSTENITIC-FERRITIC (DUPLEX) STAINLESS STEELS WITH SPECIFIC INSPECTION REQUIREMENTS |
| DIN EN 15363:2014-08 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - CHLORINE |
| DIN EN 10220:2003-03 | SEAMLESS AND WELDED STEEL TUBES - DIMENSIONS AND MASSES PER UNIT LENGTH |
| DIN 19627:1993-03 | OZONE GENERATION PLANTS FOR WATER TREATMENT |
| DIN EN 1992-1-1:2011-01 | EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS |
| DIN EN 15075:2013-07 | CHEMICALS USED FOR TREATMENT OF SWIMMING POOL WATER - SODIUM HYDROGEN CARBONATE |
| DIN 19624:2014-12 | PRECOAT FILTERS FOR WATER TREATMENT |
| DIN EN 1092-1:2016-05 (Draft) | FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES |
| DIN 1986-100:2016-12 | DRAINAGE SYSTEMS ON PRIVATE GROUND - PART 100: SPECIFICATIONS IN RELATION TO DIN EN 752 AND DIN EN 12056 |
| DIN EN 1717:2011-08 | Protection against pollution of potable water installations and general requirements of devices to prevent pollution by backflow |
| DIN 38406-1:1983-05 | GERMAN STANDARD METHODS FOR THE EXAMINATION OF WATER, WASTE WATER AND SLUDGE; CATIONS (GROUP E); DETERMINATION OF IRON (E 1) |
| DIN 50927:1985-08 | PLANNING AND APPLICATION OF ELECTROCHEMICAL CORROSION PROTECTION OF INTERNAL SURFACES OF APPARATUS, CONTAINERS AND TUBES (INTERNAL PROTECTION) |
| DIN EN ISO 12944-3:2016-02 (Draft) | PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - PART 3: DESIGN CONSIDERATIONS (ISO 12944-3:2017) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.