DD IEC/PAS 62282-6-150:2011
Current
The latest, up-to-date edition.
Fuel cell technologies Micro fuel cell power systems. Safety. Water reactive (UN Division 4.3) compounds in indirect PEM fuel cells
Hardcopy , PDF
English
31-08-2011
Important note : All end users must be registered with an Account prior to user licenses being assigned.
FOREWORD
1 Scope
2 Normative references
3 Terms and definitions
4 Materials and construction of micro fuel cell power
systems, micro fuel cell power units and fuel cartridges
5 Abnormal operating and fault conditions testing and
requirements
6 Instructions and warnings for micro fuel cell power
systems, micro fuel cell power units and fuel cartridges
7 Type tests for micro fuel cell power systems, micro
fuel cell power units and fuel cartridges
Bibliography
Defines micro fuel cell power systems using hydrogen produced from the reaction of an aqueous solution with solid UN Division 4.3 (water-reactive) compounds in indirect PEM fuel cell systems that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA.
| Committee |
GEL/105
|
| DocumentType |
Standard
|
| Pages |
86
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
IEC/PAS 62282-6-150:2011(E) covers micro fuel cell power systems using hydrogen produced from the reaction of an aqueous solution with solid UN Division 4.3 (water-reactive) compounds in indirect PEM fuel cell systems that are wearable or easily carried by hand, providing d.c. outputs that do not exceed 60 V d.c. and power outputs that do not exceed 240 VA.
| Standards | Relationship |
| IEC PAS 62282-6-150:2011 | Identical |
| IEC 61025:2006 | Fault tree analysis (FTA) |
| ISO/TR 15916:2015 | Basic considerations for the safety of hydrogen systems |
| IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV | Information technology equipment - Safety - Part 1: General requirements |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| IEC 62281:2016 | Safety of primary and secondary lithium cells and batteries during transport |
| IEC 62282-6-100:2010+AMD1:2012 CSV | Fuel cell technologies - Part 6-100: Micro fuel cell power systems - Safety |
| IEC 60812:2006 | Analysis techniques for system reliability - Procedure for failure mode and effects analysis (FMEA) |
| ISO 188:2011 | Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests |
| IEC 60695-2-11:2014 | Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) |
| ISO 16017-1:2000 | Indoor, ambient and workplace air — Sampling and analysis of volatile organic compounds by sorbent tube/thermal desorption/capillary gas chromatography — Part 1: Pumped sampling |
| IEC 60050-426:2008 | International Electrotechnical Vocabulary (IEV) - Part 426: Equipment for explosive atmospheres |
| ISO 16111:2008 | Transportable gas storage devices Hydrogen absorbed in reversible metal hydride |
| IEC 62282-5-1:2012 | Fuel cell technologies - Part 5-1: Portable fuel cell power systems - Safety |
| ISO 9772:2012 | Cellular plastics Determination of horizontal burning characteristics of small specimens subjected to a small flame |
| ISO 175:2010 | Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
| IEC 60695-11-10:2013 | Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical flame test methods |
| ISO 16000-3:2011 | Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
| IEC 60086-4:2014 | Primary batteries - Part 4: Safety of lithium batteries |
| IEC 60695-1-11:2014 | Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment |
| IEC 61032:1997 | Protection of persons and equipment by enclosures - Probes for verification |
| IEC 60695-1-10:2016 | Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines |
| ISO 16000-6:2011 | Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
| IEC 60079-15:2010 | Explosive atmospheres - Part 15: Equipment protection by type of protection "n" |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.