BS ISO 6474-2:2012
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Implants for surgery. Ceramic materials Composite materials based on a high-purity alumina matrix with zirconia reinforcement
Hardcopy , PDF
25-03-2019
English
31-10-2012
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Classification
4 Preparation of specimens
5 Test methods
Bibliography
Describes the characteristics of, and corresponding test methods for, a biocompatible and biostable ceramic-bone-substitute material based on a zirconia-reinforced, high-purity alumina matrix composite for use as a component in orthopaedic joint prostheses.
| Committee |
CH/150/1
|
| DevelopmentNote |
Together with BS ISO 6474-1, its supersedes BS 7253-2(1997). Supersedes 10/30196848 DC. (10/2012)
|
| DocumentType |
Standard
|
| Pages |
24
|
| PublisherName |
British Standards Institution
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 6474-2:2012 | Identical |
| ISO 23146:2012 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for fracture toughness of monolithic ceramics — Single-edge V-notch beam (SEVNB) method |
| EN 843-2:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio |
| ISO 20501:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) Weibull statistics for strength data |
| EN 843-1:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength |
| ISO 18754:2013 | Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of density and apparent porosity |
| ISO 14242-1:2014 | Implants for surgery — Wear of total hip-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test |
| ISO 12677:2011 | Chemical analysis of refractory products by X-ray fluorescence (XRF) Fused cast-bead method |
| EN 843-5:2006 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis |
| ASTM C 1327 : 2015 : REDLINE | TEST METHOD FOR VICKERS INDENTATION HARDNESS OF ADVANCED CERAMICS |
| ISO 13356:2015 | Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) |
| ISO 22214:2006 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for cyclic bending fatigue of monolithic ceramics at room temperature |
| ASTM C 1259 : 2015 : REDLINE | Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration |
| ISO 14705:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for hardness of monolithic ceramics at room temperature |
| EN 623-2:1993 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity |
| ISO 6474-1:2010 | Implants for surgery Ceramic materials Part 1: Ceramic materials based on high purity alumina |
| ISO 14704:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for flexural strength of monolithic ceramics at room temperature |
| ISO 18756:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method |
| CEN/TS 14425-5 : 2004 | ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITIC CERAMICS - PART 5: SINGLE-EDGE VEE-NOTCH BEAM (SEVNB) METHOD |
| EN 843-4:2005 | Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness |
| EN 623-3:2001 | Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 3: Determination of grain size and size distribution (characterized by the Linear Intercept Method) |
| ASTM C 1499 : 2015 : REDLINE | TEST METHOD FOR MONOTONIC EQUIBIAXIAL FLEXURAL STRENGTH OF ADVANCED CERAMICS AT AMBIENT TEMPERATURE |
| ISO 10993-1:2009 | Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
| ISO 17561:2016 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for elastic moduli of monolithic ceramics at room temperature by sonic resonance |
| ISO 16428:2005 | Implants for surgery — Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices |
| ISO 14243-1:2009 | Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test |
| ISO 15732:2003 | Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.