BS ISO 26945 : 2008
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF TIN-COBALT ALLOY
Hardcopy , PDF
31-03-2011
English
01-01-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Information to be supplied by the purchaser to the
processor
4.1 Required information
5 Designation
5.1 General
5.2 Designation specification
5.3 Basis metal
5.4 Designation of heat treatment requirements
5.5 Examples
6 Requirements
6.1 Basis material
6.2 Appearance
6.3 Undercoats
6.4 Thickness
6.5 Adhesion
6.6 Accelerated corrosion testing
6.7 Stress relief heat treatment prior to electroplating
6.8 Hydrogen-embrittlement-relief heat treatment after
electroplating
7 Sampling
Annex A (normative) - Methods of measuring the thickness
of tin-cobalt alloy coatings
Bibliography
Describes electroplated coatings of tin-cobalt alloy of approximate composition 75% (mass fraction) to 80% (mass fraction) tin, remainder cobalt, as a substitute for decorative chromium coating of 0,1 [mu]m to 0,3 [mu]m thickness.
| Committee |
STI/33
|
| DevelopmentNote |
Supersedes 07/30165984 DC. (01/2009)
|
| DocumentType |
Standard
|
| Pages |
22
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ISO 26945:2011 | Identical |
| ISO 9220:1988 | Metallic coatings Measurement of coating thickness Scanning electron microscope method |
| ISO 2080:2008 | Metallic and other inorganic coatings Surface treatment, metallic and other inorganic coatings Vocabulary |
| ISO 4541:1978 | Metallic and other non-organic coatings Corrodkote corrosion test (CORR test) |
| ISO 9587:2007 | Metallic and other inorganic coatings Pretreatment of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 27830:2008 | Metallic and other inorganic coatings Guidelines for specifying metallic and inorganic coatings |
| ISO 27831-1:2008 | Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 1: Ferrous metals and alloys |
| ISO 1463:2003 | Metallic and oxide coatings Measurement of coating thickness Microscopical method |
| ISO 10587:2000 | Metallic and other inorganic coatings Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods Inclined wedge method |
| ISO 15724:2001 | Metallic and other inorganic coatings — Electrochemical measurement of diffusible hydrogen in steels — Barnacle electrode method |
| ISO 2179:1986 | Electroplated coatings of tin-nickel alloy — Specification and test methods |
| ISO 1456:2009 | Metallic and other inorganic coatings — Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium |
| ISO 2819:1980 | Metallic coatings on metallic substrates — Electrodeposited and chemically deposited coatings — Review of methods available for testing adhesion |
| ISO 27831-2:2008 | Metallic and other inorganic coatings — Cleaning and preparation of metal surfaces — Part 2: Non-ferrous metals and alloys |
| ASTM E 527 : 2016 : REDLINE | Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS) |
| ISO 4519:1980 | Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes |
| ISO 3497:2000 | Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
| ISO 9588:2007 | Metallic and other inorganic coatings Post-coating treatments of iron or steel to reduce the risk of hydrogen embrittlement |
| ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
| ISO 10289:1999 | Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates Rating of test specimens and manufactured articles subjected to corrosion tests |
| ISO 2064:1996 | Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Logging out.