BS EN 61057:1994
Current
The latest, up-to-date edition.
Aerial devices with insulating boom used for live working exceeding 1 kV a.c.
Hardcopy , PDF
English
31-08-2006
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 Specific terms and nomenclature
5 Requirements
6 Tests
7 Conformance testing of aerial devices after
completion of the production phase
8 Modifications
Annex A (informative) - Guidelines for selecting the
characteristics of insulating aerial devices as a
function of the live working methods
Annex B (normative) - Suitable for live working; double
triangle IEC-60417-5216:2002-10
Annex C (normative) - General type test procedure
Annex D (normative) - Classification of defects and tests
to be allocated
Annex E (informative) - Care and maintenance
Annex F (informative) - Hydraulic depressurization (vacuum
protection)
Bibliography
Applies to mobile elevating work platforms with or without additional jib or extending structures for working on electrical power lines working between 1 kV a.c. to 800 kV a.c.
| Committee |
PEL/78
|
| DevelopmentNote |
Supersedes 93/202884 DC (10/2002) 1994 Edition remains active & will be withdrawn on 24.07.2020. Supersedes 14/30318963 DC and BS IEC TS 61813. (03/2018)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-EN 61057:1996 | Identical |
| SN EN 61057 : 1993 | Identical |
| IEC 61057:2017 | Identical |
| EN 61057:2017 | Identical |
| I.S. EN 61057:2017 | Identical |
| NBN EN 61057 : 1996 | Identical |
| DIN EN 61057 : 2018 | Identical |
| NF EN 61057 : 2017 | Identical |
| IEC 61865:2001 | Overhead lines - Calculation of the electrical component of distance between live parts and obstacles - Method of calculation |
| IEC 60060-2:2010 | High-voltage test techniques - Part 2: Measuring systems |
| ISO 18893:2014 | Mobile elevating work platforms — Safety principles, inspection, maintenance and operation |
| IEC 61472:2013 | Live working - Minimum approach distances for a.c. systems in the voltage range 72,5 kV to 800 kV - A method of calculation |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| SAE J517_201612 | HYDRAULIC HOSE |
| EN 62237:2005 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| IEC 60212:2010 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
| ISO 4302:2016 | Cranes — Wind load assessment |
| IEC 61235:1993 | Live working - Insulating hollow tubes for electrical purposes |
| IEC 60855-1:2016 | Live working - Insulating foam-filled tubes and solid rods - Part 1: Tubes and rods of a circular cross-section |
| ASTM F 914 : 2003 | Standard Test Method for Acoustic Emission for Insulated and Non-Insulated Aerial Personnel Devices Without Supplemental Load Handling Attachments |
| EN 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| EN ISO 13850:2015 | Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
| IEC 60743:2013 | Live working - Terminology for tools, devices and equipment |
| IEC 61109:2008 | Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria |
| EN 61318:2008 | Live working - Conformity assessment applicable to tools, devices and equipment |
| IEC 62237:2003 | Live working - Insulating hoses with fittings for use with hydraulic tools and equipment |
| EN 60060-2:2011 | High-voltage test techniques - Part 2: Measuring systems |
| ISO 16368:2010 | Mobile elevating work platforms Design, calculations, safety requirements and test methods |
| SAE J343_201605 | TEST AND TEST PROCEDURES FOR SAE 100R SERIES HYDRAULIC HOSE AND HOSE ASSEMBLIES |
| ISO 4305:2014 | Mobile cranes — Determination of stability |
| IEC 61318:2007 | Live working - Conformity assessment applicable to tools, devices and equipment |
| ISO 13850:2015 | Safety of machinery Emergency stop function Principles for design |
| IEC 60050-651:2014 | International Electrotechnical Vocabulary (IEV) - Part 651: Live working |
| IEC 60060-1:2010 | High-voltage test techniques - Part 1: General definitions and test requirements |
| EN 60212:2011 | Standard conditions for use prior to and during the testing of solid electrical insulating materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.