ASTM F 2895 : 2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Digital Radiography of Cast Metallic Implants
Hardcopy , PDF
11-10-2024
English
01-02-2020
Committee |
F 04
|
DocumentType |
Standard Practice
|
Pages |
4
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This practice covers the procedure for digital radiographic testing of cast metallic surgical implants and related weldments.
1.2Digital X-ray is an alternative method for radiography of cast metallic surgical implants and related weldments (see Practice F629).
1.3The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard.
1.4This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.5This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM F 629 : 2020 | Standard Practice for Radiography of Cast Metallic Surgical Implants |
ASTM F 629 : 2024 | Standard Practice for Radiography of Cast Metallic Surgical Implants |
ASTM F 3160 : 2021 | Standard Guide for Metallurgical Characterization of Absorbable Metallic Materials for Medical Implants |
ASTM E 1316 : 2022 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 2033 : 2017 | Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method) |
ASTM E 2660 : 2017 | Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
ASTM E 1316 : 2020 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 2007 : 2010 : R2023 | Standard Guide for Computed Radiography |
ASTM E 2660 : 2022 | Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications |
ASTM E 2669 : 2016 : EDT 1 | Standard Digital Reference Images for Titanium Castings |
ASTM E 746 : 2018 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems |
ASTM E 1316 : 2024 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1742/E1742M : 2018 | Standard Practice for Radiographic Examination |
ASTM E 1316 : 2021 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2024 | Standard Terminology for <?Pub Dtl?>Nondestructive Examinations |
ASTM E 1030/E1030M : 2021 | Standard Practice for Radiographic Examination of Metallic Castings |
ASTM E 1030/E1030M : 2015 | Standard Practice for Radiographic Examination of Metallic Castings |
ASTM E 1316 : 2021 : REV D | Standard Terminology for Nondestructive Examinations |
ASTM E 2669 : 2022 | Standard Digital Reference Images for Titanium Castings |
ASTM E 1316 : 2022 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV B | Standard Terminology for Nondestructive Examinations |
ASTM E 1742/E1742M : 2023 | Standard Practice for Radiographic Examination |
ASTM E 1316 : 2002 | Standard Terminology for Nondestructive Examinations |
ASTM E 2007 : 2010 : R2016 | Standard Guide for Computed Radiography |
ASTM E 1316 : 2023 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 746 : 2023 | Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems below 4 MeV |
ASTM E 1316 : 2021 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2024 : REV A | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2021 : REV C | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 | Standard Terminology for Nondestructive Examinations |
ASTM E 1316 : 2023 : REV B | Standard Terminology for Nondestructive Examinations |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.