ASTM E 1775 : 2020
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
Hardcopy , PDF
20-09-2024
English
01-09-2020
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 22
|
| DocumentType |
Guide
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide provides guidelines for determining the performance of field-portable quantitative lead analysis instruments.
1.2This guide applies to field-portable electroanalytical and spectrophotometric (including reflectance and colorimetric) analyzers.
1.3Sample matrices of concern herein include paint, dust, soil, and airborne particles.
1.4This guide addresses the desired performance characteristics of field-based sample extraction procedures for lead, as well as on-site extraction followed by field-portable analysis.
1.5This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM E 631 : 2015 : R2024 | Standard Terminology of Building Constructions |
| ASTM E 1979 : 2021 | Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead |
| ASTM D 8568 : 2024 | Standard Test Method for Determination of Lead by Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques |
| ASTM E 3203 : 2021 | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM E 1728/E1728M : 2020 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM D 7144 : 2021 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids |
| ASTM E 1605 : 2022 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1644 : 2021 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM D 7035 : 2016 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM E 3203 : 2024 : REV A | Standard Test Method for Determination of Lead by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM D 6785 : 2020 | Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry |
| ASTM E 1645 : 2020 : REV A | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1729 : 2020 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
| ASTM E 1644 : 2017 | Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead |
| ASTM E 3203 : 2019 : REV A | Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM E 3193 : 2021 | Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
| ASTM E 1726 : 2021 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 3193 : 2023 | Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS) |
| ASTM E 1792 : 2020 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM D 7035 : 2021 | Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) |
| ASTM E 1726 : 2020 | Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis |
| ASTM E 1645 : 2021 | Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis |
| ASTM E 1727 : 2020 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
| ASTM E 1728/E1728M : 2024 | Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination |
| ASTM E 3203 : 2024 | Standard Test Method for Determination of Lead by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES) |
| ASTM E 3193 : 2020 | Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS) |
| ASTM E 1605 : 2019 | Standard Terminology Relating to Lead in Buildings |
| ASTM E 1583 : 2017 | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
| ASTM D 7439 : 2014 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
| ASTM E 1729 : 2024 | Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination |
| ASTM E 1583 : 2021 : REV A | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
| ASTM D 5438 : 2017 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM D 5438 : 2023 | Standard Practice for Collection of Floor Dust for Chemical Analysis |
| ASTM D 7439 : 2021 | Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry |
| ASTM E 1727 : 2024 | Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination |
| ASTM E 1583 : 2021 | Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures |
| ASTM E 1792 : 2024 | Standard Specification for Wipe Sampling Materials for Lead in Surface Dust |
| ASTM D 7144 : 2005 : REV A : R2016 | Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.