ASTM D 5819 : 2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
Available format(s)
Hardcopy , PDF
Superseded date
06-02-2018
Superseded by
Language(s)
English
Published date
06-02-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 35
|
| DocumentType |
Guide
|
| Pages |
11
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This guide covers a designer/specifier through a systematic determination of those factors of the appropriate application environment that may affect the post-construction service life of a geosynthetic. Subsequently, test methods are recommended to facilitate an experimental evaluation of the durability of geosynthetics in a specified environment so that the durability can be considered in the design process.
(A)Functions are used in the context of this guide as terms that can be quantitatively described by standard tests or design techniques, or both.
(B)Other performance characteristics are qualitative descriptions that are not yet supported by standard tests or generally accepted design techniques.
Note—during the placement of fresh concrete in a geotextile flexible form, the geosynthetic functions temporarily as a filter to allow excess water to escape.
1.2This guide is not intended to address durability issues associated with the manufacturing, handling, transportation, or installation environments.
1.3This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 8203 : 2018 | Standard Test Method for Determination of the Horizontal Water Flow Rate of a Geosynthetic Screening Material, Product, or Device |
| ASTM D 6917 : 2016 | Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD) |
| ASTM D 4886 : 2010 : R2016 | Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method) |
| ASTM D 5101 : 1999 | Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio |
| ASTM D 4439 : 2020 | Standard Terminology for Geosynthetics |
| ASTM D 5322 : 1998 | Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 1987 : 2018 | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
| ASTM D 5567 : 1994 : R2001 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 5262 : 2006 | Standard Test Method for Evaluating the Unconfined Tension Creep Rupture Behavior of Geosynthetics |
| ASTM D 4439 : 2015 | Standard Terminology for Geosynthetics |
| ASTM D 1987 : 2007 : R2016 | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
| ASTM D 1204 : 2007 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 5567 : 1994 : R1999 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 5496 : 1998 : R2003 | Standard Practice for In Field Immersion Testing of Geosynthetics |
| ASTM D 5721 : 2008 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 1204 : 2014 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 5721 : 2008 : R2013 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 5397 : 2007 : R2012 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 5262 : 2007 : R2016 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 7238 : 2006 : R2012 | Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus |
| ASTM D 7406 : 2020 | Standard Test Method for Time-Dependent Compressive Deformation Under Constant Pressure for Geosynthetic Drainage Products |
| ASTM D 7361 : 2007 : R2012 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 5496 : 1998 : R2009 | Standard Practice for In Field Immersion Testing of Geosynthetics |
| ASTM D 7406 : 2007 | Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products |
| ASTM D 5397 : 1999 : R2005 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 4439 : 2011 | Standard Terminology for Geosynthetics |
| ASTM D 1204 : 2008 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 7361 : 2007 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 7238 : 2006 | Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus |
| ASTM D 5262 : 2004 | Standard Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics |
| ASTM D 2990 : 2017 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ASTM D 4439 : 2015 : REV A | Standard Terminology for Geosynthetics |
| ASTM D 5397 : 1999 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 1987 : 2007 | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
| ASTM D 1204 : 2014 : R2020 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 4439 : 2002 | Standard Terminology for Geosynthetics |
| ASTM D 3083 : 1989 | Specification for Flexible Poly (Vinyl Chloride) Plastic Sheeting for Pond, Canal, and Reservoir Lining (Withdrawn 1998) |
| ASTM D 5397 : 2007 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 2990 : 2001 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ASTM D 5397 : 2019 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 5262 : 2021 | Standard Test Method for Determining the Unconfined Tension Creep and Creep Rupture Behavior of Planar Geosynthetics Used for Reinforcement Purposes |
| ASTM D 5262 : 2002 : REV A | Standard Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics |
| ASTM D 5721 : 1995 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 5262 : 1997 | Standard Test Method for Evaluating the Unconfined Tension Creep Behavior of Geosynthetics |
| ASTM D 4439 : 2017 | Standard Terminology for Geosynthetics |
| ASTM D 5101 : 2012 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM D 6992 : 2003 | Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 5262 :2007 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 6992 : 2016 | Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 4355/D4355M : 2021 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture, and Heat in a Xenon Arc-Type Apparatus |
| ASTM D 5322 : 1998 : R2009 | Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 7238 : 2006 : R2017 | Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus |
| ASTM D 2990 : 2009 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ASTM D 2990 : 1995 | Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics |
| ASTM D 5567 : 1994 : R2006 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 7238 : 2020 | Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus |
| ASTM D 5101 : 2001 : R2006 | Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio |
| ASTM D 5262 : 2007 : R2012 | Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics |
| ASTM D 5397 : 2019 : REV A | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 5567 : 1994 : R2018 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 4439 : 2001 | Standard Terminology for Geosynthetics |
| ASTM D 5496 : 2015 | Standard Practice for In Field Immersion Testing of Geosynthetics |
| ASTM D 4439 : 2014 | Standard Terminology for Geosynthetics |
| ASTM D 6992 : 2003 : R2009 | Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 4886 : 2018 | Standard Test Method for Abrasion Resistance of Geotextiles (Sandpaper/Sliding Block Method) |
| ASTM D 5721 : 2008 : R2018 | Standard Practice for Air-Oven Aging of Polyolefin Geomembranes |
| ASTM D 1987 : 2007 : R2012 | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
| ASTM D 1204 : 1994 : EDT 1 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 1987 : 1995 | Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters |
| ASTM D 4355/D4355M : 2014 : R2018 | Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc-Type Apparatus |
| ASTM D 6992 : 2003 : R2015 | Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 5397 : 2020 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 5322 : 1998 : R2003 | Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 4439 : 2004 | Standard Terminology for Geosynthetics |
| ASTM D 4886 : 1988 : R1995 : EDT 1 | Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method) |
| ASTM D 4886 : 1988 : R2002 | Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method) |
| ASTM D 5322 : 2017 | Standard Practice for Laboratory Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids |
| ASTM D 4886 : 2010 | Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method) |
| ASTM D 5397 : 1999 : EDT 1 | Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test |
| ASTM D 7361 : 2007 : R2018 | Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method |
| ASTM D 5496 : 1998 | Standard Practice for In Field Immersion Testing of Geosynthetics |
| ASTM D 1204 : 2002 | Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature |
| ASTM D 4439 : 2000 | Standard Terminology for Geosynthetics |
| ASTM D 5101 : 2012 : R2017 | Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems |
| ASTM D 4439 : 2018 | Standard Terminology for Geosynthetics |
| ASTM D 7406 : 2007 : R2012 | Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products |
| ASTM D 5567 : 1994 : R2011 | Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems |
| ASTM D 5101 : 2001 | Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.