• Shopping Cart
    There are no items in your cart
We noticed you’re not on the correct regional site. Switch to our AMERICAS site for the best experience.
Dismiss alert

ASTM D 5681 : 2022 : EDT 1

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Standard Terminology for Waste and Waste Management

Available format(s)

Hardcopy , PDF

Superseded date

09-11-2023

Superseded by

ASTM D 5681 : 2023

Language(s)

English

Published date

05-12-2022

£63.73
Excluding VAT

Committee
D 34
DocumentType
Reference Material
Pages
18
ProductNote
NOTE—The definition for ‘PFAS’ was editorially updated in December 2022.
PublisherName
American Society for Testing and Materials
Status
Superseded
SupersededBy
Supersedes

1.1This terminology contains standard definitions of terms used in the general area of waste and waste management. It is intended to promote understanding by providing precise technical definitions of terms used in the standards developed by Committee D34 and its subcommittees.

1.2Terms used only within an individual standard, and having a meaning unique to that standard, may be defined or explained in the terminology section of that individual standard.

1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.

1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.

ASTM E 711 : 2023 : EDT 1 Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
ASTM E 777 : 2023 Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM E 829 : 2023 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
ASTM E 953 : 2023 Standard Test Method for Fusibility of Refuse-Derived Fuel (RDF) Ash
ASTM D 4646 : 2016 : R2023 Standard Test Method for 24 h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM D 7204 : 2023 Standard Practice for Sampling Waste Streams on Conveyors
ASTM D 5792 : 2010 : R2015 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
ASTM E 777 : 2017 : REV A Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
ASTM D 4979 : 2019 Standard Practice for Physical Description Screening Analysis in Waste
ASTM D 4981 : 2019 Standard Practice for Screening of Oxidizers in Waste
ASTM D 6700 : 2019 Standard Guide for Use of Scrap Tires as Tire-Derived Fuel
ASTM E 1109 : 2019 Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
ASTM D 6538 : 2012 : R2019 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D 6009 : 2019 Standard Guide for Sampling Waste Piles
ASTM D 5232 : 2019 Standard Practice for Determining the Stability and Miscibility of a Solid, Semi-Solid, or Liquid Waste Material
ASTM D 8018 : 2015 : R2020 Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
ASTM D 5058 : 2012 : R2020 Standard Practices for Compatibility of Screening Analysis of Waste
ASTM D 3987 : 2012 : R2020 Standard Practice for Shake Extraction of Solid Waste with Water
ASTM D 5759 : 2012 : R2020 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
ASTM E 1266 : 2020 Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
ASTM D 7858 : 2013 : R2018 Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
ASTM D 5283 : 2018 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Quality Assurance and Quality Control Planning and Implementation
ASTM D 6323 : 2019 Standard Guide for Laboratory Subsampling of Media Related to Waste Management Activities
ASTM D 4547 : 2020 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM D 6270 : 2020 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
ASTM D 5658 : 2020 Standard Practice for Sampling Unconsolidated Waste from Trucks
ASTM D 7831 : 2020 Standard Practice for Sampling of Tanks by Field Personnel
ASTM D 4982 : 2020 Standard Test Methods for Flammability Potential Screening Analysis of Waste
ASTM D 5633 : 2021 Standard Practice for Sampling with a Scoop
ASTM D 5451 : 2021 Standard Practice for Sampling Using a Trier Sampler
ASTM E 790 : 2021 Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples
ASTM D 6050 : 2021 Standard Test Method for Determination of Insoluble Solids in Organic Liquid Hazardous Waste
ASTM E 2787 : 2021 Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM E 2838 : 2021 Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
ASTM D 5495 : 2021 Standard Practice for Sampling with a Composite Liquid Waste Sampler (COLIWASA)
ASTM E 2866 : 2021 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid, and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
ASTM E 775 : 2015 : R2021 Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
ASTM E 778 : 2015 : R2021 Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples
ASTM D 7353 : 2021 Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
ASTM D 5743 : 2021 Standard Practice for Sampling Single or Multilayered Liquids, with or Without Solids, in Drums or Similar Containers
ASTM E 702 : 2021 Standard Specification for Municipal Ferrous Scrap
ASTM E 887 : 2021 Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
ASTM E 1037 : 2021 Standard Test Method for Measuring Particle Size Distribution of RDF-5
ASTM D 6640 : 2021 Standard Practice for Collection and Handling of Soils Obtained in Core Barrel Samplers for Environmental Investigations
ASTM D 5956 : 2021 Standard Guide for Sampling Strategies for Heterogeneous Wastes
ASTM D 6044 : 2021 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D 6232 : 2021 Standard Guide for Selection of Sampling Equipment for Waste and Contaminated Media Data Collection Activities
ASTM E 791 : 2008 : R2022 Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
ASTM D 5830 : 2022 Standard Test Method for Solvents Analysis in Hazardous Waste Using Gas Chromatography
ASTM D 6907 : 2022 Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
ASTM D 5530 : 2022 Standard Test Method for Total Moisture of Hazardous Waste Fuel by Karl Fischer Titrimetry
ASTM D 5513 : 2022 Standard Practice for Microwave Digestion of Industrial Furnace Feed Streams and Waste for Trace Element Analysis
ASTM D 4646 : 2016 Standard Test Method for 24-h Batch-Type Measurement of Contaminant Sorption by Soils and Sediments
ASTM D 4844 : 2016 Standard Guide for Air Monitoring at Waste Management Facilities for Worker Protection
ASTM D 5057 : 2017 Standard Test Method for Screening Apparent Specific Gravity and Bulk Density of Waste
ASTM D 5198 : 2017 Standard Practice for Nitric Acid Digestion of Solid Waste
ASTM D 5831 : 2017 Standard Practice for Screening Fuels in Soils
ASTM D 6346 : 2017 Standard Guide for Accepting, Segregating, and Packaging Materials Collected Through Household Hazardous Waste Programs
ASTM D 6661 : 2017 Standard Practice for Field Collection of Organic Compounds from Surfaces Using Wipe Sampling
ASTM D 6699 : 2016 Standard Practice for Sampling Liquids Using Bailers
ASTM E 829 : 2016 Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
ASTM D 6759 : 2016 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D 6956 : 2017 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM D 7204 : 2015 Standard Practice for Sampling Waste Streams on Conveyors
ASTM E 953/E953M : 2016 Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash
ASTM D 8064 : 2016 Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams (Withdrawn 2024)
ASTM D 8155 : 2017 Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
ASTM D 8187 : 2018 Standard Guide for Interpretation of Standard Humidity Cell Test Results

ASTM D 4439 : 2020 Standard Terminology for Geosynthetics
ASTM E 711 : 2023 : EDT 1 Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter
ASTM E 889 : 1982 : R2014 Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM D 4790 : 2020 : REV A Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
ASTM D 1129 : 2013 : R2020 Standard Terminology Relating to Water
ASTM E 135 : 2023 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM D 5746 : 2023 Standard Classification of Environmental Condition of Property Area Types, Including Explosives Safety for Federally-Owned Real Property
ASTM D 6051 : 2015 : R2023 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM E 135 : 2021 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM D 5745 : 2015 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
ASTM D 1129 : 2013 : R2020 : EDT 1 Standard Terminology Relating to Water
ASTM E 135 : 2023 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM D 5746 : 1998 : R2016 Standard Classification of Environmental Condition of Property Area Types for Defense Base Closure and Realignment Facilities
ASTM D 4790 : 2023 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals
ASTM D 6051 : 2015 Standard Guide for Composite Sampling and Field Subsampling for Environmental Waste Management Activities
ASTM D 6008 : 2022 Standard Practice for Determining the Environmental Condition of Federal Property
ASTM E 889 : 1982 : R2023 Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
ASTM E 711 : 1987 : R2004 Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter (Withdrawn 2004)
ASTM E 135 : 2022 : REV B Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 943 : 2023 Standard Terminology Relating to Biological Effects and Environmental Fate
ASTM E 135 : 2022 : REV A Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM E 943 : 2008 : R2014 Standard Terminology Relating to Biological Effects and Environmental Fate (Withdrawn 2023)
ASTM D 4439 : 2023 : REV A Standard Terminology for Geosynthetics
ASTM D 4439 : 2023 : REV B Standard Terminology for Geosynthetics
ASTM E 135 : 2022 Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials
ASTM D 6008 : 1996 : R2014 Standard Practice for Conducting Environmental Baseline Surveys
ASTM D 5745 : 2023 Standard Guide for Developing and Implementing Interim and Early Actions for Waste Contamination Site Remediation
ASTM D 4439 : 2023 Standard Terminology for Geosynthetics

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.