ASTM D 5217 : 2017
Current
Current
The latest, up-to-date edition.
Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
01-11-2017
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 19
|
| DocumentType |
Guide
|
| Pages |
5
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Current
|
| Supersedes |
1.1This guide presents a series of tests and evaluations intended to detect fouling and degradation of particulate ion exchange materials. Suggestions on reducing fouling and on cleaning resins are given.
1.2This guide is to be used only as an aid in the evaluation of particulate ion exchange material performance and does not purport to address all possible causes of unsatisfactory performance. The evaluations of mechanical and operational problems are not addressed.
1.3This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.4This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM D 2187 : 1994 : R1998 | Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 2187 : 1994 : R2004 | Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 3683 : 2004 | Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption |
| ASTM D 3682 : 2001 : EDT 1 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes |
| ASTM D 2687 : 1995 : R2016 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM D 1129 : 2003 | Standard Terminology Relating to Water |
| ASTM D 6302 : 1998 | Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
| ASTM D 2332 : 2013 : R2021 | Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
| ASTM D 1129 : 2013 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2013 : R2020 | Standard Terminology Relating to Water |
| ASTM D 3375 : 1995 : REV A | Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials |
| ASTM D 3087 : 2017 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM D 3375 : 1995 : REV A : R2007 | Standard Test Method for Column Capacity of Particulate Mixed Bed Ion<br> Exchange Materials (Withdrawn 2016) |
| ASTM D 1129 : 2013 : R2020 : EDT 2 | Standard Terminology Relating to Water |
| ASTM D 3087 : 1991 : R2009 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM D 2332 : 1984 : R1999 | Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
| ASTM D 2687 : 1995 : R2024 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM D 1782 : 2017 | Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials |
| ASTM D 3682 : 2021 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes by Atomic Spectrometry |
| ASTM D 3682 : 2001 : R2006 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes |
| ASTM D 3683 : 2011 | Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption (Withdrawn 2018) |
| ASTM D 1129 : 2006 | Standard Terminology Relating to Water |
| ASTM D 2332 : 2008 | Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
| ASTM D 2332 : 1984 : R2003 | Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
| ASTM D 3375 : 2018 | Standard Test Method for Column Capacity of Particulate Mixed Bed Ion<brk/>Exchange Materials |
| ASTM D 3087 : 1991 : R2004 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM D 3375 : 1995 : REV A : R2001 | Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials |
| ASTM D 3375 : 2016 | Standard Test Method for Column Capacity of Particulate Mixed Bed Ion<brk/>Exchange Materials |
| ASTM D 1129 : 2013 : R2020 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1129 : 1999 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2006 : REV A | Standard Terminology Relating to Water |
| ASTM D 2187 : 2017 | Standard Test Methods and Practices for Evaluating Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 2687 : 1995 : R2001 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
| ASTM D 1129 : 2003 : REV A | Standard Terminology Relating to Water |
| ASTM D 1129 : 2002 | Standard Terminology Relating to Water |
| ASTM D 1782 : 1995 : R2009 | Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials |
| ASTM D 5042 : 1990 : R1998 | Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins |
| ASTM D 3087 : 1991 : R1998 | Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal |
| ASTM D 3682 : 2000 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes |
| ASTM D 5042 : 1990 : R2004 : EDT 1 | Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins |
| ASTM D 1129 : 2004 | Standard Terminology Relating to Water |
| ASTM D 1782 : 1995 : R2001 | Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials |
| ASTM D 2187 : 1994 : R2009 : EDT 1 | Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 1782 : 1995 : R2007 | Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials |
| ASTM D 2187 : 1994 : R2009 | Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins |
| ASTM D 1129 : 2002 : REV A | Standard Terminology Relating to Water |
| ASTM D 3682 : 2013 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes |
| ASTM D 3683 : 1994 : R2000 | Standard Test Method for Trace Elements in Coal and Coke Ash by Atomic Absorption |
| ASTM D 6302 : 1998 : R2004 | Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
| ASTM D 6302 : 1998 : R2009 | Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
| ASTM D 1129 : 2010 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2006 : REV A : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2001 | Standard Terminology Relating to Water |
| ASTM D 1129 : 2004 : EDT 1 | Standard Terminology Relating to Water |
| ASTM D 6302 : 1998 : R2017 | Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins |
| ASTM D 5042 : 1990 : R2009 | Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins (Withdrawn 2018) |
| ASTM D 2332 : 2013 | Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence |
| ASTM D 3682 : 2001 | Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes |
| ASTM D 2687 : 1995 : R2007 : EDT 1 | Standard Practices for Sampling Particulate Ion-Exchange Materials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.