ASTM D 1654 : 1992 : R2000
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
Hardcopy , PDF
11-11-2014
English
10-07-2000
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
D 01
|
| DocumentType |
Test Method
|
| Pages |
3
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy |
1.1 This test method covers the treatment of previously painted or coated specimens for accelerated and atmospheric exposure tests and their subsequent evaluation in respect to corrosion, blistering associated with corrosion, loss of adhesion at a scribe mark, or other film failure.
1.2 This standard does not purport to address all of the safety problems, if any, associated with its use. It is the responsibility of whoever uses this standard to consult and establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
| ASTM D 2247 : 2015 | Standard Practice for Testing Water Resistance of Coatings in 100 % Relative Humidity |
| ASTM D 870 : 2015 | Standard Practice for Testing Water Resistance of Coatings Using Water Immersion |
| ASTM D 2803 : 2009 : R2015 | Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal |
| ASTM D 3794 : 2018 | Standard Guide for Testing Coil Coatings |
| ASTM G 162 : 2018 | Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils |
| ASTM F 2408 : 2016 | Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets |
| ASTM D 1735 : 2014 | Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus |
| ASTM F 2957 : 2013 : R2019 : EDT 1 | Standard Specification for Ornamental Aluminum Fence Systems |
| ASTM A 1003/A1003M : 2015 | Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members |
| ASTM D 2248 : 2001 : REV A : R2018 | Standard Practice for Detergent Resistance of Organic Finishes |
| ASTM B 117 : 2018 | Standard Practice for Operating Salt Spray (Fog) Apparatus |
| ASTM D 6577 : 2015 | Standard Guide for Testing Industrial Protective Coatings |
| ASTM C 647 : 2019 | Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation |
| ASTM D 5367 : 2016 | Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted |
| ASTM D 4585/D4585M : 2018 | Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation |
| ASTM F 1075 : 1997 : R2018 | Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained |
| ASTM D 1014 : 2018 | Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates |
| ASTM D 7893 : 2013 : R2018 | Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products |
| ASTM D 3451 : 2006 : R2017 | Standard Guide for Testing Coating Powders and Powder Coatings |
| ASTM D 6675 : 2001 : R2015 | Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel |
| ASTM D 7376 : 2010 : REV A : R2016 | Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals |
| ASTM G 85 : 2011 | Standard Practice for Modified Salt Spray (Fog) Testing |
| ASTM F 2589 : 2016 | Standard Specification for Ornamental Fences Employing Steel Tubular Pickets |
| ASTM A 1004/A1004M : 1999 : R2018 | Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members |
| ASTM G 87 : 2002 : R2018 | Standard Practice for Conducting Moist SO<inf>2</inf> Tests |
| ASTM A 755/A755M : 2018 | Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products |
| ASTM D 5894 : 2016 | Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.