ASTM C 1384 : 2018 : EDT 1
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Admixtures for Masonry Mortars
Hardcopy , PDF
08-01-2024
English
27-12-2018
Important note : All end users must be registered with an Account prior to user licenses being assigned.| Committee |
C 12
|
| DocumentType |
Standard
|
| Pages |
5
|
| ProductNote |
ε1 NOTE—Annex reference corrections for Test Method C780 were editorially made in December 2018.
|
| PublisherName |
American Society for Testing and Materials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
1.1This specification pertains to admixtures for masonry mortars. Admixtures are substances other than Specification C270 prescribed materials of water, aggregate, and cementitious materials that are used to improve one or more of the recognized desirable properties of conventional masonry mortar.
1.2This specification does not cover coloring pigments.
Note 1:Information on coloring pigments can be found in Specification C979/C979M.
1.3This specification does not cover additives that are added to the cementitious materials during the manufacture of the cementitious materials.
1.4Acceptance of an admixture is based on its performance in an admixed mortar. Acceptance of the admixed masonry mortar is based on attainment of performance either equivalent to that required for conventional mortar or improved performance of one or more indicated properties, while maintaining required performance levels for other properties.
1.5The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.
Note 2:The testing laboratory performing the test methods referenced in this specification should be evaluated in accordance with Practice C1093.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
| ASTM C 1660 : 2010 : R2018 | Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry |
| ASTM C 1780 : 2018 : REV A | Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer |
| ASTM C 1180 : 2018 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1714/C1714M : 2019 : REV A | Standard Specification for Preblended Dry Mortar Mix for Unit Masonry |
| ASTM C 1403 : 2015 | Standard Test Method for Rate of Water Absorption of Masonry Mortars |
| ASTM C 1713 : 2017 | Standard Specification for Mortars for the Repair of Historic Masonry |
| ASTM C 1732 : 2015 | Standard Practice for Installation of Concrete Floor Tiles |
| ASTM C 1732 : 2019 | Standard Practice for Installation of Concrete Floor Tiles |
| ASTM C 1780 : 2023 : REV A | Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer |
| ASTM C 1714/C1714M : 2023 | Standard Specification for Preblended Dry Mortar Mix for Unit Masonry |
| ASTM C 1713 : 2023 | Standard Specification for Mortars for the Repair of Historic Masonry |
| ASTM C 1072 : 2019 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 305 : 2014 | Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency |
| ASTM C 1093 : 2019 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 1995 | Standard Practice for Accreditation of Testing Agencies for Unit Masonry |
| ASTM C 1403 : 2022 | Standard Test Method for Rate of Water Absorption of Masonry Mortars |
| ASTM C 780 : 2020 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM C 1403 : 2014 | Standard Test Method for Rate of Water Absorption of Masonry Mortars |
| ASTM C 1093 : 2015 : REV A : EDT 1 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1072 : 2000 : REV A | Standard Test Method for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1093 : 2015 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1403 : 2022 : REV A | Standard Test Method for Rate of Water Absorption of Masonry Mortars |
| ASTM C 780 : 2023 | Standard Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM C 1180 : 2022 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1403 : 2000 | Standard Test Method for Rate of Water Absorption of Masonry Mortars |
| ASTM C 403/C403M : 2023 | Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
| ASTM C 1072 : 2022 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM C 1093 : 2023 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2022 | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 723 : 1998 | Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile |
| ASTM C 403/C403M : 2016 | Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance |
| ASTM C 780 : 2018 : REV A | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM C 1437 : 2015 | Standard Test Method for Flow of Hydraulic Cement Mortar |
| ASTM C 780 : 2019 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
| ASTM C 1180 : 2019 | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1437 : 1999 | Standard Test Method for Flow of Hydraulic Cement Mortar |
| ASTM C 1180 : 2000 : REV A | Standard Terminology of Mortar and Grout for Unit Masonry |
| ASTM C 1093 : 2015 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 1093 : 2022 : REV A | Standard Practice for Accreditation of Testing Agencies for Masonry |
| ASTM C 780 : 2000 | Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.