ASTM C 1172 : 2019
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Specification for Laminated Architectural Flat Glass
Hardcopy , PDF
26-09-2024
English
01-02-2019
Committee |
C 14
|
DocumentType |
Standard
|
Pages |
6
|
PublisherName |
American Society for Testing and Materials
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
1.1This specification covers the quality requirements of flat laminated glass consisting of two or more lites of glass bonded with an interlayer material for use in building and related applications.
1.2Depending on the number, thickness, and treatment of lites, and the number and thickness of interlayers, the glass shall be laminated for applications including, but not limited to, safety, security, detention, hurricane/cyclic-wind resistance, blast resistance, bullet resistance, sound reduction, and decorative glazing.
1.3Optical distortion and the evaluation thereof are not currently within the scope of the standard. Mockups are recommended as a method to evaluate glass. (See Appendix X1.)
1.4The dimensional values, except thickness designations, stated in inch-pound units are to be regarded as the standard. The values in parentheses are for information only.
1.5The following safety hazards caveat pertains only to the test method portion, Section 7, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.6This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
ASTM C 162 : 2005 : R2015 | Standard Terminology of<brk type="line"/> Glass and Glass Products |
ASTM E 2136 : 2004 : R2013 | Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022) |
ASTM F 3006 : 2019 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
ASTM F 3007 : 2019 | Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass |
ASTM F 2248 : 2019 | Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass |
ASTM E 1300 : 2016 | Standard Practice for Determining Load Resistance of Glass in Buildings |
ASTM C 1349 : 2017 | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
ASTM C 1401 : 2014 | Standard Guide for Structural Sealant Glazing |
ASTM C 1464 : 2016 | Standard Specification for Bent Glass |
ASTM E 2751/E2751M : 2017 : REV A | Standard Practice for Design and Performance of Supported Laminated Glass Walkways |
ASTM E 3120 : 2017 | Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings |
ASTM F 3561 : 2022 | Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack |
ASTM C 1908 : 2021 | Standard Test Method for Pummel Adhesion Testing of Two-ply Laminated Architectural Glass |
ASTM E 2751/E2751M : 2021 | Standard Practice for Design and Performance of Supported Laminated Glass Walkways |
ASTM E 998 : 2019 | Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads |
ASTM C 1900 : 2020 | Standard Practice for Weathering and Evaluation of Laminated Glass |
ASTM C 1464 : 2021 | Standard Specification for Bent Glass |
ASTM C 1401 : 2014 : R2022 | Standard Guide for Structural Sealant Glazing |
ASTM E 3120 : 2019 | Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings |
ASTM C 1914 : 2021 | Standard Test Method for Bake and Boil Testing of Laminated Glass |
ASTM C 1401 : 2023 | Standard Guide for Structural Sealant Glazing |
ASTM C 1349 : 2017 : R2024 | Standard Specification for Architectural Flat Glass Clad Polycarbonate |
ASTM F 3561 : 2023 | Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack |
ASTM E 3401/E3401M : 2024 | Standard Practice for Design and Performance of Laminated Glass Subject to Hydrostatic Loads |
ASTM E 1300 : 2024 | Standard Practice for Determining Load Resistance of Glass in Buildings |
ASTM F 1233 : 1998 | Standard Test Method for Security Glazing Materials And Systems |
ASTM E 413 : 2022 | Classification for Rating Sound Insulation |
ASTM C 1376 : 1997 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Glass |
ASTM C 1048 : 1997 : REV B | Standard Specification for Heat-Treated Flat Glass--Kind HS, Kind FT Coated and Uncoated Glass |
ASTM C 1036 : 2021 | Standard Specification for Flat Glass |
ASTM E 413 : 2016 | Classification for Rating Sound Insulation |
ASTM E 2395 : 2021 | Standard Specification for Voluntary Security Performance of Window and Door Assemblies with Glazing Impact |
ASTM C 1048 : 2018 | Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass |
ASTM F 1233 : 2021 | Standard Test Method for Security Glazing Materials And Systems |
ASTM E 1996 : 2023 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
ASTM C 1036 : 2016 | Standard Specification for Flat Glass |
ASTM E 1332 : 1990 : R1998 | Standard Classification for Determination of Outdoor-Indoor Transmission Class |
ASTM E 2395 : 2018 | Standard Specification for Voluntary Security Performance of Window and Door Assemblies with Glazing Impact |
ASTM C 1503 : 2024 | Standard Specification for Silvered Flat Glass Mirror |
ASTM E 1332 : 2016 | Standard Classification for Rating Outdoor-Indoor Sound Attenuation |
ASTM E 1996 : 2001 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors and Storm Shutters Impacted by Windborne Debris in Hurricanes |
ASTM C 1376 : 2021 : REV A | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
ASTM E 1332 : 2022 | Standard Classification for Rating Outdoor-Indoor Sound Attenuation |
ASTM F 3007 : 2013 | Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass |
ASTM C 1422 : 1999 | Standard Specification for Chemically Strengthened Flat Glass |
ASTM F 1642 : 1996 | Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings |
ASTM F 1233 : 2008 : R2019 | Standard Test Method for Security Glazing Materials And Systems |
ASTM C 1503 : 2001 | Standard Specification for Silvered Flat Glass Mirror |
ASTM F 3006 : 2020 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
ASTM E 308 : 2018 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
ASTM E 1996 : 2020 | Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes |
ASTM C 162 : 2023 | Standard Terminology of Glass and Glass Products |
ASTM E 2395 : 2005 | Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact |
ASTM F 1915 : 1998 | Standard Test Methods for Glazing for Detention Facilities |
ASTM E 1886 : 2019 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
ASTM C 1376 : 2015 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
ASTM C 1376 : 2021 | Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass |
ASTM F 3006 : 2013 | Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing |
ASTM F 1915 : 2005 : R2019 | Standard Test Methods for Glazing for Detention Facilities |
ASTM E 308 : 2022 | Standard Practice for Computing the Colors of Objects by Using the CIE System |
ASTM C 1503 : 2018 | Standard Specification for Silvered Flat Glass Mirror |
ASTM C 1036 : 1991 : R1997 | Standard Specification for Flat Glass |
ASTM E 1886 : 1997 | Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Storm Shutters Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.