Preview

Bridge design Concrete

Available format(s)

Hardcopy , PDF 1 User , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English

Published date

31-03-2017

Publisher

Standards Australia

Preview

£158.76

Excluding VAT

Product format

I agree to the DRM document license rules apply against the PDF selection made.

Please confirm that you agree to the document license rules for this document.

I agree to the document license rules .

Please confirm that you agree to the document license rules for this document.

Sets out minimum requirements for the design and construction of concrete bridges and associated structures, including members that contain reinforcing steel and tendons, or both, in limit state format.

Committee	BD-090
DocumentType	Standard
ISBN	978 1 76035 718 4
Pages	215
ProductNote	Also numbered as AP-G51.5-17.
PublisherName	Standards Australia
Status	Current
Supersedes	AS 5100.5-2004 AS 5100.5-2004 AMDT 2 DR AS 5100.3 AS 5100.5-2004 AMDT 1

This Standard sets out minimum requirements for the design and construction of concrete bridges and associated structures that contain reinforcement or tendons, or both. It also sets out minimum requirements for plain and steel fibre reinforced concrete (SFRC) members. NOTES: 1 It is intended that the properties and requirements for reinforcement or tendons, as set out in this Standard, may also be used for the design and construction of elements not containing concrete, for example, stress laminated timber decks.2 For design life of bridges covered by this Standard, see Clause 4.1.

Originated as HB 77.5-1996.
Revised and redesignated as AS 5100.5-2004.
Second edition 2017.
Reissued incorporating Amendment No 1 (November 2018).
Reissued incorporating Amendment No 2 (May 2024).

AS 1012.21-1999	Methods of testing concrete Determination of water absorption and apparent volume of permeable voids in hardened concrete (Reconfirmed 2014)
AS 1012.11-2000	Methods of testing concrete Determination of the modulus of rupture (Reconfirmed 2014)
AS 1012.20.1:2016	Methods of testing concrete Determination of chloride and sulfate in hardened concrete and aggregates - Nitric acid extraction method
AS 3799-1998	Liquid membrane-forming curing compounds for concrete (Reconfirmed 2018)
AS 3735-2001	Concrete structures for retaining liquids
SA HB 79:2015	Alkali Aggregate Reaction - Guidelines on Minimising the Risk of Damage to Concrete Structures in Australia
AS 5100.2:2017	Bridge design Design loads
AS/NZS 4672.2:2007	Steel prestressing materials Testing requirements
AS 1012.20.2:2016	Methods of testing concrete Determination of water-soluble chloride in aggregates and hardened concrete
AS 1012.1:2014	Methods of testing concrete Sampling of concrete
AS 1012.3.1:2014	Methods of testing concrete Determination of properties related to the consistency of concrete - Slump test
AS 3600-2009	Concrete structures
AS 1012.9:2014	Methods of testing concrete Compressive strength tests - Concrete, mortar and grout specimens
AS 1012.13:2015	Methods of testing concrete Determination of the drying shrinkage of concrete for samples prepared in the field or in the laboratory
AS 1012.4.1:2014	Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in concrete volume with increased air pressure
AS 1100.501-1985	Technical drawing - Structural engineering drawing
AS 1379-2007	Specification and supply of concrete (Reconfirmed 2017)
AS 1012.12.1-1998	Methods of testing concrete Determination of mass per unit volume of hardened concrete - Rapid measuring method (Reconfirmed 2014)
AS 5100.1:2017	Bridge design Scope and general principles
AS/NZS 1768:2007	Lightning protection
AS 1597.2-2013	Precast reinforced concrete box culverts Large culverts (exceeding 1200 mm span or 1200 mm height and up to and including 4200 mm span and 4200 mm height)
AS/NZS 1554.6:2012	Structural steel welding Welding stainless steels for structural purposes
AS 3735 SUPP 1-2001	Concrete structures for retaining liquids - Commentary (Supplement to
AS/NZS 4671:2001	Steel reinforcing materials
AS 4672.1:2007	Steel prestressing materials General requirements
AS 1012.10-2000	Methods of testing concrete Determination of indirect tensile strength of concrete cylinders ('Brazil' or splitting test) (Reconfirmed 2014)
AS 5100.7:2017	Bridge design Bridge assessment
AS/NZS 3500.2:2015	Plumbing and drainage Sanitary plumbing and drainage
AS/NZS 1554.3:2014	Structural steel welding Welding of reinforcing steel
AS/NZS 1170.0:2002	Structural design actions General principles
AS 1012.4.3:2014	Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring air volume when concrete is dispersed in water
AS 1012.2:2014	Methods of testing concrete Preparing concrete mixes in the laboratory
AS 1012.3.5:2015	Methods of testing concrete Determination of properties related to the consistency of concrete - Slump flow, T500 and J-ring test
AS/NZS 3582.1:2016	Supplementary cementitious materials Fly ash
AS 1012.16-1996	Methods of testing concrete Determination of creep of concrete cylinders in compression (Reconfirmed 2014)
AS/NZS 2425:2015	Bar chairs in reinforced concrete - Product requirements and test methods
AS/NZS 3500.4:2015	Plumbing and drainage Heated water services
AS/NZS 3500.3:2015	Plumbing and drainage Stormwater drainage
AS/NZS 3000:2007	Electrical installations (known as the Australian/New Zealand Wiring Rules)
AS/NZS 3582.3:2002	Supplementary cementitious materials for use with portland and blended cement Amorphous silica
AS/NZS 3500.0:2003	Plumbing and drainage Glossary of terms
AS 1199.1-2003	Sampling procedures for inspection by attributes Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection (Reconfirmed 2016)
AS 1012.14-1991	Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength
AS 1012.4.2:2014	Methods of testing concrete Determination of air content of freshly mixed concrete - Measuring reduction in air pressure in chamber above concrete
AS 3972-2010	General purpose and blended cements
AS/NZS 3582.3:2016	Supplementary cementitious materials Amorphous silica
AS 1478.1-2000	Chemical admixtures for concrete, mortar and grout Admixtures for concrete (Reconfirmed 2018)
AS 1012.12.2-1998	Methods of testing concrete Determination of mass per unit volume of hardened concrete - Water displacement method (Reconfirmed 2014)
AS/NZS 3500.1:2015	Plumbing and drainage Water services
AS 3610.1-2010	Formwork for concrete Documentation and surface finish
AS 1141.60.2:2014	Methods for sampling and testing aggregates Potential alkali-silica reactivity - Concrete prism method
AS 1012.17-1997	Methods of testing concrete Determination of the static chord modulus of elasticity and Poisson’s ratio of concrete specimens (Reconfirmed 2014)

AS 5100.9:2017	Bridge design Timber
AS 5100.7:2017	Bridge design Bridge assessment
AS 3700:2018	Masonry Structures
AS 5100.4:2017	Bridge design Bearings and deck joints
AS 5100.8:2017	Bridge design Rehabilitation and strengthening of existing bridges
AS 5100.1:2017	Bridge design Scope and general principles
AS 1012.14:2018	Methods of testing concrete Method for securing and testing cores from hardened concrete for compressive strength and mass per unit volume
AS 5100.3:2017	Bridge design Foundation and soil-supporting structures
AS 5100.2:2017	Bridge design Design loads
AS/NZS 5100.6:2017	Bridge design Steel and composite construction

Access your standards online with a subscription

Features

Simple online access to standards, technical information and regulations.
Critical updates of standards and customisable alerts and notifications.
Multi-user online standards collection: secure, flexible and cost effective.

Learn more on subscription solutions

Get in touch with us

Shopping Cart

AS 5100.5:2017

Bridge design Concrete

Shopping Cart

AS 5100.5:2017

Bridge design Concrete

Table of Contents

Abstract

General Product Information

Scope

History

Standards Referenced By This Book

Standards Referencing This Book

Category

Subcategory