AASHTO R 18:2018
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Standard Practice for Establishing and Implementing a Quality Management System for Construction Materials Testing Laboratories, Single User PDF Download
Available format(s)
Hardcopy , PDF
Superseded date
14-10-2024
Superseded by
Language(s)
English
Published date
16-04-2019
This document contains criteria and guidelines for establishing and implementing a quality management system (QMS) for use by a construction materials testing (CMT) laboratory.
| DocumentType |
Standard
|
| Pages |
33
|
| ProductNote |
THIS STANDARD ALSO REFERS-C39/C39M,C470/C470M,D559/D599M,
|
| PublisherName |
American Association of State Highway and Transportation Officials
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| AASHTO T 48:2022 | Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup |
| AASHTO T 48 : 2018 | Standard Method of Test for Flash Point of Asphalt Binder by Cleveland Open Cup |
| ASTM D 6723 : 2012 | Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Withdrawn 2021) |
| ASTM D 6521 : 2018 | Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV) |
| ASTM C 617/C617M : 2015 | Standard Practice for Capping Cylindrical Concrete Specimens |
| ASTM D 7115 : 2010 : R2015 | Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading |
| ASTM D 6648 : 2008 : R2016 | Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR) |
| ASTM D 4753 : 2015 | Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing |
| ASTM D 2850 : 2015 | Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils |
| AASHTO T 180 : 2017 | METHOD OF TEST FOR MOISTURE-DENSITY RELATIONS OF SOILS USING A 4.54-KG (10-LB) RAMMER AND A 457-MM (18-IN.) DROP |
| ASTM C 230/C230M : 2014 | Standard Specification for Flow Table for Use in Tests of Hydraulic Cement |
| AASHTO T 300 : 2011(R2016) | METHOD OF TEST FOR FORCE DUCTILITY TEST OF ASPHALT MATERIALS |
| ASTM D 2844/D2844M : 2018 | Standard Test Method for Resistance <emph type="bdit">R</emph>-Value and Expansion Pressure of Compacted Soils |
| ASTM C 231/C231M : 2017 : REV A | Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method |
| AASHTO R 39 : 2017 | PRACTICE FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE LABORATORY |
| ASTM C 31/C31M : 2018 : REV B | Standard Practice for Making and Curing Concrete Test Specimens in the Field |
| ASTM C 305 : 2014 | Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency |
| AASHTO T 231 : 2017 | PRACTICE FOR CAPPING CYLINDRICAL CONCRETE SPECIMENS |
| AASHTO T 23 : 2018 | METHOD OF TEST FOR MAKING AND CURING CONCRETE TEST SPECIMENS IN THE FIELD |
| ASTM D 3143/D3143M : 2013 | Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus |
| ASTM C 131/C131M : 2014 | Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine |
| AASHTO T 129 : 2014(R2018) | METHOD OF TEST FOR AMOUNT OF WATER REQUIRED FOR NORMAL CONSISTENCY OF HYDRAULIC CEMENT PASTE |
| AASHTO T 121M/T 121 : 2017 | STANDARD METHOD OF TEST FOR DENSITY (UNIT WEIGHT), YIELD, AND AIR CONTENT (GRAVIMETRIC) OF CONCRETE |
| ASTM D 854 : 2014 | Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer (Withdrawn 2023) |
| ASTM D 1883 : 2016 | Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils |
| ASTM D 92 : 2018 | Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester |
| AASHTO T 119M/T 119 : 2013 | METHOD OF TEST FOR SLUMP OF HYDRAULIC CEMENT CONCRETE |
| ASTM C 29/C29M : 2017 : REV A | Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate |
| AASHTO T 316 : 2013(R2017) | METHOD OF TEST FOR VISCOSITY DETERMINATION OF ASPHALT BINDER USING ROTATIONAL VISCOMETER |
| ASTM D 1074 : 2017 | Standard Test Method for Compressive Strength of Asphalt Mixtures |
| ASTM C 185 : 2015 : REV A | Standard Test Method for Air Content of Hydraulic Cement Mortar |
| ASTM C 451 : 2018 | Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method) |
| ASTM C 266 : 2018 | Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles |
| ASTM C 430 : 2017 | Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve |
| AASHTO T 312 : 2015 | METHOD OF TEST FOR PREPARING AND DETERMINING THE DENSITY OF ASPHALT MIXTURE SPECIMENS BY MEANS OF THE SUPERPAVE GYRATORY COMPACTOR |
| AASHTO T 89 : 2013(R2017) | METHOD OF TEST FOR DETERMINING THE LIQUID LIMIT OF SOILS |
| ASTM D 36/D36M : 2014 : EDT 1 | Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus) |
| ASTM D 6927 : 2015 | Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures |
| ASTM D 558 : 2011 | Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures |
| ASTM E 11 : 2017 | Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves |
| AASHTO T 196M/T 196 : 2011(R2015) | METHOD OF TEST FOR AIR CONTENT OF FRESHLY MIXED CONCRETE BY THE VOLUMETRIC METHOD |
| ASTM E 77 : 2014 : EDT 1 | Standard Test Method for Inspection and Verification of Thermometers |
| ASTM D 2872 : 2012 : EDT 1 | Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test) |
| ASTM C 173/C173M : 2016 | Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method |
| ASTM D 4402/D4402M : 2015 | Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer |
| ASTM D 2170/D2170M : 2010 | Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens) |
| AASHTO T 135 : 2013(R2017) | METHOD OF TEST FOR WETTING-AND-DRYING TEST OF COMPACTED SOIL-CEMENT MIXTURES |
| ASTM C 115/C115M : 2010 : EDT 1 | Standard Test Method for Fineness of Portland Cement by the Turbidimeter (Withdrawn 2018) |
| ASTM D 1557 : 2012 : EDT 1 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft<sup>3</sup> (2,700 kN-m/m<sup>3</sup>)) |
| AASHTO T 228 : 2009(R2013) | METHOD OF TEST FOR SPECIFIC GRAVITY OF SEMI-SOLID ASPHALT MATERIALS |
| ASTM D 2041/D2041M : 2011 | Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures |
| AASHTO T 314 : 2012(R2016) | METHOD OF TEST FOR DETERMINING THE FRACTURE PROPERTIES OF ASPHALT BINDER IN DIRECT TENSION (DT) |
| ASTM C 204 : 2018 | Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus |
| ASTM D 6925 : 2015 | Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor |
| ASTM C 778 : 2017 | Standard Specification for Standard Sand |
| AASHTO T 162 : 2016 | Standard Method of Test for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency |
| ASTM D 113 : 2017 | Standard Test Method for Ductility of Asphalt Materials |
| AASHTO T 131 : 2015 | METHOD OF TEST FOR TIME OF SETTING OF HYDRAULIC CEMENT BY VICAT NEEDLE |
| AASHTO T 202 : 2015 | METHOD OF TEST FOR VISCOSITY OF ASPHALTS BY VACUUM CAPILLARY VISCOMETER |
| ASTM C 88/C88M : 2018 : REDLINE | Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate |
| AASHTO T 201 : 2015 | METHOD OF TEST FOR KINEMATIC VISCOSITY OF ASPHALTS (BITUMENS) |
| ASTM C 1506 : 2017 | Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters |
| ASTM D 4318 : 2017 : EDT 1 | Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils |
| ASTM C 128 : 2015 | Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate |
| AASHTO T 19M/T 19 : 2014 | METHOD OF TEST FOR BULK DENSITY ('UNIT WEIGHT') AND VOIDS IN AGGREGATE |
| AASHTO T 96 : 2010 | METHOD OF TEST FOR RESISTANCE TO DEGRADATION OF SMALL-SIZE COARSE AGGREGATE BY ABRASION AND IMPACT IN THE LOS ANGELES MACHINE |
| AASHTO T 190 : 2014 | METHOD OF TEST FOR RESISTANCE R-VALUE AND EXPANSION PRESSURE OF COMPACTED SOILS |
| ASTM C 143/C143M : 2015 : REV A | Standard Test Method for Slump of Hydraulic-Cement Concrete |
| ASTM C 191 : 2018 | Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle |
| AASHTO T 313 : 2012(R2016) | METHOD OF TEST FOR DETERMINING THE FLEXURAL CREEP STIFFNESS OF ASPHALT BINDER USING THE BENDING BEAM RHEOMETER (BBR) |
| ASTM C 192/C192M : 2016 : REV A | Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory |
| ASTM D 5/D5M : 2013 | Standard Test Method for Penetration of Bituminous Materials |
| ASTM D 1560 : 2015 | Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus (Withdrawn 2024) |
| ASTM D 1561/D1561M : 2013 | Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor (Withdrawn 2022) |
| ASTM D 1754/D1754M : 2009 : R2014 | Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test) |
| AASHTO R 28 : 2012(R2016) | PRACTICE FOR ACCELERATED AGING OF ASPHALT BINDER USING A PRESSURIZED AGING VESSEL (PAV) |
| ASTM C 109/C109M : 2016 : REV A | Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens) |
| AASHTO T 100 : 2015 | METHOD OF TEST FOR SPECIFIC GRAVITY OF SOILS |
| T 99:2018 | Standard Method of Test for Moisture-Density Relations of Soils Using a 2.5-kg (5.5-lb) Rammer and a 305-mm (12-in.) Drop, Single User PDF Download |
| AASHTO T 106M/T 106 : 2018 | METHOD OF TEST FOR COMPRESSIVE STRENGTH OF HYDRAULIC CEMENT MORTAR (USING 50-MM OR 2-IN. CUBE SPECIMENS) |
| AASHTO T 176 : 2017 | Standard Method of Test for Plastic Fines in Graded Aggregates and Soils by Use of the Sand Equivalent Test |
| AASHTO T 315 : 2012(R2016) | METHOD OF TEST FOR DETERMINING THE RHEOLOGICAL PROPERTIES OF ASPHALT BINDER USING A DYNAMIC SHEAR RHEOMETER (DSR) |
| ASTM D 1856 : 2009 : R2015 | Standard Test Method for Recovery of Asphalt From Solution by Abson Method |
| ASTM C 67/C67M : 2018 | Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile |
| AASHTO T 186 : 2015 | METHOD OF TEST FOR EARLY STIFFENING OF HYDRAULIC CEMENT (PASTE METHOD) |
| ASTM D 7175 : 2015 | Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer |
| AASHTO T 308 : 2016 | METHOD OF TEST FOR DETERMINING THE ASPHALT BINDER CONTENT OF HOT MIX ASPHALT (HMA) BY THE IGNITION METHOD |
| AASHTO R 68 : 2015 | PRACTICE FOR PREPARATION OF ASPHALT MIXTURES BY MEANS OF THE MARSHALL APPARATUS |
| AASHTO T 137 : 2012(R2016) | METHOD OF TEST FOR AIR CONTENT OF HYDRAULIC CEMENT MORTAR |
| AASHTO T 49 : 2015 | METHOD OF TEST FOR PENETRATION OF BITUMINOUS MATERIALS |
| AASHTO T 104 : 1999(R2016) | METHOD OF TEST FOR SOUNDNESS OF AGGREGATE BY USE OF SODIUM SULFATE OR MAGNESIUM SULFATE |
| AASHTO T 209 : 2012(R2016) | METHOD OF TEST FOR THEORETICAL MAXIMUM SPECIFIC GRAVITY (G[MM]) AND DENSITY OF HOT MIX ASPHALT (HMA) |
| ASTM D 6926 : 2016 | Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus |
| AASHTO R 61 : 2012(R2016) | PRACTICE FOR ESTABLISHING REQUIREMENTS FOR EQUIPMENT CALIBRATIONS, STANDARDIZATIONS, AND CHECKS |
| ASTM C 187 : 2016 | Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste |
| ASTM D 2168 : 2010 : R2018 | Standard Practices for Calibration of Laboratory Mechanical-Rammer Soil Compactors |
| AASHTO T 301 : 2013(R2017) | METHOD OF TEST FOR ELASTIC RECOVERY TEST OF ASPHALT MATERIALS BY MEANS OF A DUCTILOMETER |
| ASTM C 138/C138M : 2017 : REV A | Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete |
| ASTM D 70 : 2018 : REV A | Standard Test Method for Density of Semi-Solid Asphalt Binder (Pycnometer Method) |
| ASTM D 139 : 2016 | Standard Test Method for Float Test for Bituminous Materials |
| AASHTO T 79 : 2012(R2016) | METHOD OF TEST FOR FLASH POINT WITH TAG OPEN-CUP APPARATUS FOR USE WITH MATERIAL HAVING A FLASH POINT LESS THAN 93 DEGREES C (200 DEGREES F) |
| AASHTO T 48 : 2017 | METHOD OF TEST FOR FLASH AND FIRE POINTS BY CLEVELAND OPEN CUP |
| ASTM C 1072 : 2013 : EDT 1 | Standard Test Methods for Measurement of Masonry Flexural Bond Strength |
| ASTM D 560/D560M : 2016 | Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures |
| AASHTO T 154 : 2018 | METHOD OF TEST FOR TIME OF SETTING OF HYDRAULIC CEMENT PASTE BY GILLMORE NEEDLES |
| ASTM D 88 : 2007 : R2013 | Standard Test Method for Saybolt Viscosity |
| ASTM D 6084/D6084M : 2013 | Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer |
| ASTM D 4829 : 2011 | Standard Test Method for Expansion Index of Soils |
| AASHTO T 245 : 2015 | METHOD OF TEST FOR RESISTANCE TO PLASTIC FLOW OF ASPHALT MIXTURES USING MARSHALL APPARATUS |
| ASTM D 2171/D2171M : 2018 | Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer |
| ASTM D 7000 : 2011 : R2017 | Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples |
| ASTM D 6307 : 2016 | Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method |
| ASTM D 2419 : 2014 | Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate |
| ASTM D 244 : 2009 : R2017 | Standard Test Methods and Practices for Emulsified Asphalts |
| ASTM D 698 : 2012 : EDT 2 | Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft<sup>3</sup> (600 kN-m/m<sup>3</sup>)) |
Important note : All end users must be registered with an Account prior to user licenses being assigned.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Are you sure?
Logging out.