17/30335786 DC : 0
NA
NA
Status of Standard is Unknown
BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY
Available format(s)
Hardcopy , PDF
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Symbols and abbreviated terms
5 Laboratory-based measurements of emissions
and performance
6 Standard Test Sequence for emissions and
performance
7 Safety measurements
8 Durability measurements
9 Reporting test results
10 Marking and packaging
Annex A (informative) - Laboratory-based
measurements of emissions and
performance - additional considerations
Annex B (normative) - Figures for subclause 5.3.8,
Total-capture dilution-tunnel gravimetric
method for measurement of PM[2,5]
Annex C (informative) - Standard Test
Sequence - additional considerations
Annex D (informative) - Cookstove family determination
Annex E (informative) - Laboratory-based safety and
durability measurements - additional
considerations
Annex F (normative) - Scoring tables for safety and
durability tests
Annex G (informative) - Infrared thermometer
calibration
Annex H (informative) - Reporting template
Bibliography
BS ISO 19867-1.
| Committee |
RHE/28
|
| DocumentType |
Draft
|
| Pages |
116
|
| PublisherName |
British Standards Institution
|
| Status |
NA
|
| ASAE S580.1 : 2013 | TESTING AND REPORTING SOLAR COOKER PERFORMANCE |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 12141:2002 | Stationary source emissions — Determination of mass concentration of particulate matter (dust) at low concentrations — Manual gravimetric method |
| ASTM D 3176 : 2015 : REDLINE | Standard Practice for Ultimate Analysis of Coal and Coke |
| ISO 13061-1:2014 | Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests |
| ASTM D 3045 : 1992 | PRACTICE FOR HEAT AGING OF PLASTICS WITHOUT LOAD |
| ISO 14780:2017 | Solid biofuels — Sample preparation |
| ISO 2854:1976 | Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
| ISO 16269-7:2001 | Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals |
| ISO 23210:2009 | Stationary source emissions Determination of PM10/PM2,5 mass concentration in flue gas Measurement at low concentrations by use of impactors |
| ISO 29904:2013 | Fire chemistry — Generation and measurement of aerosols |
| ISO 8178-1:2017 | Reciprocating internal combustion engines Exhaust emission measurement Part 1: Test-bed measurement systems of gaseous and particulate emissions |
| ISO 16559:2014 | Solid biofuels Terminology, definitions and descriptions |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO 16948:2015 | Solid biofuels Determination of total content of carbon, hydrogen and nitrogen |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO 18134-3:2015 | Solid biofuels — Determination of moisture content — Oven dry method — Part 3: Moisture in general analysis sample |
| ISO 14993:2001 | Corrosion of metals and alloys Accelerated testing involving cyclic exposure to salt mist, "dry" and "wet" conditions |
| ASTM D 4442 : 2016 : REDLINE | Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials |
| ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
| ISO 25597:2013 | Stationary source emissions Test method for determining PM2,5 and PM10 mass in stack gases using cyclone samplers and sample dilution |
| ISO 12569:2017 | Thermal performance of buildings and materials — Determination of specific airflow rate in buildings — Tracer gas dilution method |
| ISO 31-0:1992 | Quantities and units Part 0: General principles |
| ISO 18122:2015 | Solid biofuels — Determination of ash content |
| ISO 16000-26:2012 | Indoor air — Part 26: Sampling strategy for carbon dioxide (CO2) |
| ASTM D 5373 : 2016 : REDLINE | Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke |
| ISO 16183:2002 | Heavy duty engines — Measurement of gaseous emissions from raw exhaust gas and of particulate emissions using partial flow dilution systems under transient test conditions |
| ISO 14044:2006 | Environmental management Life cycle assessment Requirements and guidelines |
| ISO 5167-2:2003 | Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full Part 2: Orifice plates |
| ISO 4530:1983 | Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat |
| ISO 14159:2002 | Safety of machinery — Hygiene requirements for the design of machinery |
| ISO 12039:2001 | Stationary source emissions Determination of the mass concentration of carbon monoxide, carbon dioxide and oxygen in flue gas Performance characteristics of automated measuring systems |
| ISO 18135:2017 | Solid Biofuels — Sampling |
| ISO 11845:1995 | Corrosion of metals and alloys General principles for corrosion testing |
| ISO 18134-2:2017 | Solid biofuels — Determination of moisture content — Oven dry method — Part 2: Total moisture — Simplified method |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 21608:2012 | Corrosion of metals and alloys — Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials |
| ISO 18123:2015 | Solid biofuels — Determination of the content of volatile matter |
| ISO 10377:2013 | Consumer product safety — Guidelines for suppliers |
| ISO 17225-1:2014 | Solid biofuels Fuel specifications and classes Part 1: General requirements |
| ISO 18134-1:2015 | Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total moisture — Reference method |
| ISO 16911-2:2013 | Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 2: Automated measuring systems |
| ISO 10780:1994 | Stationary source emissions — Measurement of velocity and volume flowrate of gas streams in ducts |
| ASTM E 778 : 2015 : REDLINE | Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples |
| ASTM C 1171 : 2016 : REDLINE | Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
| ISO 10396:2007 | Stationary source emissions — Sampling for the automated determination of gas emission concentrations for permanently-installed monitoring systems |
| ISO 14040:2006 | Environmental management Life cycle assessment Principles and framework |
| ASTM D 6944 : 2015 : REDLINE | Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
| ISO 27891:2015 | Aerosol particle number concentration — Calibration of condensation particle counters |
| ISO 3129:2012 | Wood Sampling methods and general requirements for physical and mechanical testing of small clear wood specimens |
| ISO/TR 13587:2012 | Three statistical approaches for the assessment and interpretation of measurement uncertainty |
| ISO 4536:1985 | Metallic and non-organic coatings on metallic substrates Saline droplets corrosion test (SD test) |
| ISO 21501-1:2009 | Determination of particle size distribution — Single particle light interaction methods — Part 1: Light scattering aerosol spectrometer |
| ISO 23550:2011 | Safety and control devices for gas burners and gas-burning appliances General requirements |
| ISO 15900:2009 | Determination of particle size distribution Differential electrical mobility analysis for aerosol particles |
| ISO 8186:1989 | Ambient air — Determination of the mass concentration of carbon monoxide — Gas chromatographic method |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
| ISO 4224:2000 | Ambient air — Determination of carbon monoxide — Non-dispersive infrared spectrometric method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.