12/30266576 DC : 0
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 13718-2 - MEDICAL VEHICLES AND THEIR EQUIPMENT - AIR AMBULANCES - PART 2: OPERATIONAL AND TECHNICAL REQUIREMENTS OF AIR AMBULANCES
Available format(s)
Hardcopy , PDF
Superseded date
31-08-2015
Superseded by
Language(s)
English
Publisher
Important note : All end users must be registered with an Account prior to user licenses being assigned.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General requirements for air ambulances
5 Air ambulances, operation and performance requirements
6 Gas installations in air ambulances
Annex A (normative) - Medical devices in air ambulances
Annex B (normative) - Medicinal products and equipment
additional to medical devices in air ambulances
Annex ZA (informative) - Relationship between this European
Standard and the Essential Requirements of
EU Directive 93/42/EEC
Bibliography
BS EN 13718-2
| Committee |
CH/239
|
| DocumentType |
Draft
|
| Pages |
37
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 13718-2 : DRAFT 2012 | Identical |
| ISO 11070:2014 | Sterile single-use intravascular introducers, dilators and guidewires |
| EN 60601-2-34:2014 | Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment |
| EN 374-1:2003 | Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements |
| EN 455-1:2000 | Medical gloves for single use - Part 1: Requirements and testing for freedom from holes |
| EN 12342:1998+A1:2009 | Breathing tubes intended for use with anaesthetic apparatus and ventilators |
| EN 60601-2-31:2008/A1:2011 | MEDICAL ELECTRICAL EQUIPMENT - PART 2-31: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF EXTERNAL CARDIAC PACEMAKERS WITH INTERNAL POWER SOURCE |
| EN ISO 18777:2009 | Transportable liquid oxygen systems for medical use - Particular requirements (ISO 18777:2005) |
| EN ISO 407:2004 | Small medical gas cylinders - Pin-index yoke-type valve connections (ISO 407:2004) |
| ISO 7376:2009 | Anaesthetic and respiratory equipment Laryngoscopes for tracheal intubation |
| EN 60601-2-24:2015 | Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
| EN 1060-2:1995+A1:2009 | Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers |
| EN ISO 7886-2:1997 | Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996) |
| EN 1618:1997 | Catheters other than intravascular catheters - Test methods for common properties |
| EN 1060-1:1995+A2:2009 | Non-invasive sphygmomanometers - Part 1: General requirements |
| EN 1865-1:2010+A1:2015 | Patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment |
| ISO 15002:2008 | Flow-metering devices for connection to terminal units of medical gas pipeline systems |
| ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin |
| EN 1782:1998+A1:2009 | Tracheal tubes and connectors |
| EN 13718-1:2014 | Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| EN 1282-2:2005+A1:2009 | Tracheostomy tubes - Part 2: Paediatric tubes (ISO 5366-3:2001, modified) |
| EN ISO 5356-1:2015 | Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) |
| EN ISO 15002:2008 | Flow-metering devices for connection to terminal units of medical gas pipeline systems (ISO 15002:2008) |
| EN ISO 7376:2009 | Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (ISO 7376:2009) |
| ISO 5356-1:2015 | Anaesthetic and respiratory equipment Conical connectors Part 1: Cones and sockets |
| EN 1865-4:2012 | Patient handling equipment used in road ambulances - Part 4: Foldable patient transfer chair |
| ISO 9170-2:2008 | Terminal units for medical gas pipeline systems — Part 2: Terminal units for anaesthetic gas scavenging systems |
| ISO 19054:2005 | Rail systems for supporting medical equipment |
| EN ISO 10079-2:2014 | Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:2014) |
| EN 1865-2:2010+A1:2015 | Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher |
| EN 794-3:1998+A2:2009 | Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators |
| EN 455-3:2015 | Medical gloves for single use - Part 3: Requirements and testing for biological evaluation |
| ISO 7886-2:1996 | Sterile hypodermic syringes for single use Part 2: Syringes for use with power-driven syringe pumps |
| ISO 18777:2005 | Transportable liquid oxygen systems for medical use — Particular requirements |
| IEC 60601-2-30:1999 | Medical electrical equipment - Part 2-30: Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment |
| EN 1281-2 : 1995 | ANAESTHETIC AND RESPIRATORY EQUIPMENT - CONICAL CONNECTORS - SCREW-THREADED WEIGHT-BEARING CONNECTORS |
| EN ISO 10555-3:2013 | Intravascular catheters - Sterile and single-use catheters - Part 3: Central venous catheters (ISO 10555-3:2013) |
| ISO 7396-2:2007 | Medical gas pipeline systems Part 2: Anaesthetic gas scavenging disposal systems |
| EN ISO 6009:2016 | Hypodermic needles for single use - Colour coding for identification (ISO 6009:2016) |
| ISO 5356-2:2012 | Anaesthetic and respiratory equipment — Conical connectors — Part 2: Screw-threaded weight-bearing connectors |
| ISO 10079-1:2015 | Medical suction equipment Part 1: Electrically powered suction equipment |
| IEC 60601-2-34:2011 | Medical electrical equipment - Part 2-34: Particular requirements for the basic safety and essential performance of invasive blood pressure monitoring equipment |
| EN 3-10:2009 | Portable fire extinguishers - Part 10: Provisions for evaluating the conformity of a portable fire extinguisher to EN 3-7 |
| EN ISO 23328-2:2009 | Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects (ISO 23328-2:2002) |
| EN 60601-2-27:2014 | Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
| EN 12181:1998 | Oropharyngeal airways |
| EN ISO 7864:2016 | Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016) |
| ISO 3795:1989 | Road vehicles, and tractors and machinery for agriculture and forestry — Determination of burning behaviour of interior materials |
| IEC 60601-2-31:2008+AMD1:2011 CSV | Medical electrical equipment - Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source |
| ISO 21647:2004 | Medical electrical equipment Particular requirements for the basic safety and essential performance of respiratory gas monitors |
| IEC 60601-2-4:2010 | Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators |
| ISO 7886-1:2017 | Sterile hypodermic syringes for single use — Part 1: Syringes for manual use |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| EN ISO 21647:2009 | Medical electrical equipment - Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 21647:2004, including Cor 1:2005) |
| ISO 23328-2:2002 | Breathing system filters for anaesthetic and respiratory use — Part 2: Non-filtration aspects |
| EN 60601-2-30:2000 | Medical electrical equipment - Part 2-30: Particular requirements for the safety, including essential performance, of automatic cycling non-invasive blood pressure monitoring equipment |
| ISO 10079-2:2014 | Medical suction equipment Part 2: Manually powered suction equipment |
| EN 3-7:2004+A1:2007 | Portable fire extinguishers - Part 7: Characteristics, performance requirements and test methods |
| EN ISO 10555-5:2013 | Intravascular catheters - Sterile and single-use catheters - Part 5: Over-needle peripheral catheters (ISO 10555-5:2013) |
| EN 13976-2:2011 | Rescue systems - Transportation of incubators - Part 2: System requirements |
| EN ISO 8537:2016 | Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016) |
| ISO 5366-1:2000 | Anaesthetic and respiratory equipment Tracheostomy tubes Part 1: Tubes and connectors for use in adults |
| EN ISO 7396-1:2016 | Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) |
| ISO 7864:2016 | Sterile hypodermic needles for single use — Requirements and test methods |
| EN ISO 5366-1:2009 | Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults (ISO 5366-1:2000) |
| IEC 60601-2-27:2011 | Medical electrical equipment - Part 2-27: Particular requirements for the basic safety and essential performance of electrocardiographic monitoring equipment |
| ISO 10555-3:2013 | Intravascular catheters — Sterile and single-use catheters — Part 3: Central venous catheters |
| EN ISO 9360-1:2009 | Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO 9360-1:2000) |
| EN 1865-3:2012+A1:2015 | Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher |
| ISO 10555-1:2013 | Intravascular catheters — Sterile and single-use catheters — Part 1: General requirements |
| EN 455-2:2015 | Medical gloves for single use - Part 2: Requirements and testing for physical properties |
| ISO 2631-1:1997 | Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements |
| ISO 5366-3:2001 | Anaesthetic and respiratory equipment Tracheostomy tubes Part 3: Paediatric tracheostomy tubes |
| EN 340:2003 | Protective clothing - General requirements |
| ISO 10079-3:2014 | Medical suction equipment Part 3: Suction equipment powered from a vacuum or positive pressure gas source |
| IEC 60601-2-24:2012 | Medical electrical equipment - Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers |
| ISO 407:2004 | Small medical gas cylinders Pin-index yoke-type valve connections |
| ISO 23328-1:2003 | Breathing system filters for anaesthetic and respiratory use — Part 1: Salt test method to assess filtration performance |
| ISO 7137:1995 | Aircraft — Environmental conditions and test procedures for airborne equipment |
| EN ISO 9170-2:2008 | Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO 9170-2:2008) |
| ISO 9360-1:2000 | Anaesthetic and respiratory equipment — Heat and moisture exchangers (HMEs) for humidifying respired gases in humans — Part 1: HMEs for use with minimum tidal volumes of 250 ml |
| EN 1789:2007+A2:2014 | Medical vehicles and their equipment - Road ambulances |
| EN 14605:2005+A1:2009 | Protective clothing against liquid chemicals - performance requirements for clothing with liquid-tight (Type 3) or spray-tight (Type 4) connections, including items providing protection to parts of the body only (Types PB [3] and PB [4]) |
| ISO 9170-1:2017 | Terminal units for medical gas pipeline systems — Part 1: Terminal units for use with compressed medical gases and vacuum |
| EN ISO 9170-1:2008 | Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008) |
| EN ISO 7396-2:2007 | Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007) |
| EN 60601-2-12:2006 | Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators - Critical care ventilators |
| EN 13976-1:2011 | Rescue systems - Transportation of incubators - Part 1: Interface conditions |
| IEC 60601-2-12:2001 | Medical electrical equipment - Part 2-12: Particular requirements for the safety of lung ventilators - Critical care ventilators |
| EN ISO 10079-3:2014 | Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO 10079-3:2014) |
| 96/98/EC : 1996 COR 3 2015 | COUNCIL DIRECTIVE 96/98/EC OF 20 DECEMBER 1996 ON MARINE EQUIPMENT |
| ISO 6009:2016 | Hypodermic needles for single use Colour coding for identification |
| EN 1707:1996 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings |
| ISO 594-1:1986 | Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment Part 1: General requirements |
| ISO 10555-5:2013 | Intravascular catheters — Sterile and single-use catheters — Part 5: Over-needle peripheral catheters |
| EN ISO 23328-1:2008 | Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance (ISO 23328-1:2003) |
| EN 1865-5:2012 | Patient handling equipment used in road ambulances - Part 5: Stretcher support |
| EN 60601-2-4:2011 | Medical electrical equipment - Part 2-4: Particular requirements for the basic safety and essential performance of cardiac defibrillators |
| ISO 7396-1:2016 | Medical gas pipeline systems — Part 1: Pipeline systems for compressed medical gases and vacuum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.